WORKPRO 3.6V Cordless Grass and Shrub Shear User Manual

giriiş

Thank you for choosing the WORKPRO 3.6V Cordless Grass and Shrub Shear. This versatile 2-in-1 tool is designed for efficient trimming of grass edges and small shrubs. It features a lightweight design, powerful motor, and a long-lasting battery for convenient outdoor use. Please read this manual carefully before operation to ensure safe and effective use of the product.

Image: The WORKPRO 3.6V Cordless Grass and Shrub Shear, showing the main unit, the grass shear blade, the shrub shear blade, and the Type-C charging cable.

Güvenlik Bilgileri

Yangın, elektrik çarpması ve kişisel yaralanma riskini azaltmak için elektrikli aletleri kullanırken her zaman temel güvenlik önlemlerine uyun.

• Kılavuzu okuyun: Aleti çalıştırmadan önce tüm talimatları okuyun ve anlayın.
• Alanı Temiz Tutun: Keep children, bystanders, and pets away from the operating area.
• Koruyucu Ekipman Giyin: Always wear safety glasses, gloves, and appropriate footwear.
• Avoid Contact with Blades: Alet çalışır durumdayken veya elektriğe bağlıyken bıçaklara asla dokunmayın.
• Güvenli Tutuş: Çalışma sırasında aleti her zaman iki elinizle sıkıca tutun.
• Double Switch Safety: The tool features a double switch mechanism to prevent accidental activation. Ensure both switches are engaged for operation.
• Şarj: Use only the provided Type-C charging cable and a compatible 5V/1A charger. Do not use the tool while charging.
• Depolamak: Aleti çocukların erişemeyeceği, kuru ve güvenli bir yerde saklayın.

Image: Close-up of the ergonomic safety lock and ON/OFF switch, highlighting the dual activation mechanism for safe operation.

Paket İçeriği

Paket açıldığında tüm eşyaların mevcut ve iyi durumda olduğundan emin olun:

• 1 x WORKPRO Grass and Shrub Shear Unit
• 1 x Grass Blade (75 mm wide)
• 1 x Shrub Blade (120 mm length)
• 1 x Type-C Şarj Kablosu
• 1 x Kullanım Kılavuzu

Ürün Bittiview

Familiarize yourself with the components of your WORKPRO shear:

Image: Diagram showing key components: Type-C Charging Port with Indicator, Type-C Cable (1M), Safety Lock-off Button, ON/OFF Switch, Blade Release Button, TPR Anti-Slip Handle, and Shrub Blade. The unit weighs approximately 370g.

• Ana Ünite: Ergonomic body with integrated motor and battery.
• Grass Blade: Designed for trimming grass edges, 75mm cutting width.
• Shrub Blade: Designed for shaping shrubs and small branches, 120mm cutting length.
• C Tipi Şarj Bağlantı Noktası: Dahili bataryayı şarj etmek için.
• Emniyet Kilitleme Düğmesi: Kazara çalıştırmayı önler.
• Açma / kapama düğmesi: Activates the motor when the safety lock is disengaged.
• Bıçak Serbest Bırakma Düğmesi: Bıçak değişimini hızlı ve kolay hale getirir.
• TPR Anti-Slip Handle: Rahat ve güvenli bir tutuş sağlar.

Kurmak

Pilin Şarj Edilmesi

The tool is equipped with a 2000mAh Lithium-ion battery. Before first use, fully charge the battery.

1. Locate the Type-C charging port on the tool.
2. Connect the provided Type-C charging cable to the tool and to a 5V/1A USB power source (e.g., power bank, Type-C charger, car charger, laptop/PC USB port). Note: USB charging brick is not included.
3. Şarj sırasında şarj gösterge ışığı yanacaktır (genellikle kırmızı).
4. Once fully charged, the indicator light will change (typically green). Charging time is approximately 2-3 hours.
5. Şarj işlemi tamamlandıktan sonra şarj cihazının bağlantısını kesin.

Image: Illustration of the WORKPRO shear being charged via a Type-C cable, showing compatible power sources like a power bank, Type-C charger, car charger, and laptop/PC. The charging indicator lights (red for charging, green for fully charged) are also depicted.

Bıçakların Takılması/Değiştirilmesi

Ensure the tool is turned off and disconnected from any power source before changing blades.

1. Press the Blade Release Button located on the top of the tool.
2. Carefully remove the currently installed blade by pulling it away from the unit.
3. Align the desired blade (grass or shrub) with the slot on the tool.
4. Push the blade firmly into place until it clicks, indicating it is securely locked.
5. Verify the blade is securely attached by gently pulling on it.

Image: Diagram illustrating the dimensions of both the grass and shrub blades, and a close-up showing the easy and safe blade change mechanism with the blade release button.

Kullanım Talimatları

Always wear appropriate safety gear before operating the shear.

Aracı Başlatma ve Durdurma

1. Ensure the desired blade is securely installed.
2. Aleti sıkıca tutun.
3. To start, press and hold the Safety Lock-off Button with your thumb.
4. While holding the safety button, press the ON/OFF Switch with your index finger. The blades will begin to move.
5. To stop, release the ON/OFF Switch. The blades will stop.

Using the Grass Shear Blade

The grass shear blade is ideal for trimming grass edges around flowerbeds, pathways, and other areas inaccessible to larger mowers.

• Ensure the grass blade (75mm wide) is installed.
• Hold the tool with the blade parallel to the ground or at a slight angle for precise edging.
• Move the tool slowly and steadily along the grass edge.
• Avoid cutting wet grass, as it can clog the blades and reduce efficiency.

Image: Depicts the two cutting modes: Grass Shear with a maximum cutting width of 75mm, and Hedge Trimmer with a maximum cutting length of 118mm and maximum cutting thickness of 7.8mm.

Using the Shrub Shear Blade

The shrub shear blade is suitable for shaping and trimming small shrubs, hedges, and ornamental plants. It can cut branches up to 7.8mm in diameter.

• Ensure the shrub blade (120mm length) is installed.
• Hold the tool at a comfortable angle for trimming.
• Work in small sections, making smooth, even passes.
• Do not force the blades through thick branches. If resistance is met, reposition the tool or use a different cutting tool for larger branches.

Image: Collage showing the WORKPRO shear being used for various trimming tasks, including shaping small trees, weeding, and trimming potted plants, demonstrating its versatility.

Bakım

Düzenli bakım, aletinizin optimum performansını sağlar ve ömrünü uzatır.

Temizlik

• Always turn off the tool and remove the blade before cleaning.
• Use a soft brush or cloth to remove debris, sap, and dirt from the blades and housing.
• Do not use abrasive cleaners or solvents, as they can damage the plastic parts.
• Wipe the blades with a lightly oiled cloth to prevent rust.

Bıçak Bakımı

• The blades are made of premium 65Mn steel for high hardness and wear resistance.
• Inspect blades regularly for damage or dullness.
• If blades become dull, they can be sharpened by a professional or replaced.
• Store blades in a dry place to prevent corrosion.

Resim: Yakın çekim view of the premium 65Mn steel blades, emphasizing their high hardness, wear resistance, sharpness, and long life.

Depolamak

• Aleti serin, kuru bir yerde, doğrudan güneş ışığından ve nemden uzak tutarak saklayın.
• Ensure the battery is partially charged (around 50%) before long-term storage to maintain battery health.
• Çocukların ve yetkisiz kişilerin erişemeyeceği yerde saklayın.

Sorun giderme

Özellikler

Image: Visual representation of the upgraded power motor (1100rpm) and the long-lasting 2000mAh Lithium-ion battery, indicating over 40 minutes of no-load operation time.

Garanti ve Destek

For warranty information or technical support, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.

Üretici: Hang Zhou Great Star Industrial Co.,LTD

For further assistance, visit the WORKPRO official websitesine gidin veya müşteri hizmetleriyle iletişime geçin.