Hudson Valley Lighting 3060-BLNK

Hudson Valley Lighting Jonas LED Island Pendant Instruction Manual

Model: 3060-BLNK

1. Giriş

Satın aldığınız için teşekkür ederizasing the Hudson Valley Lighting Jonas LED Island Pendant. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The Jonas pendant features a modern design with a Black Nickel finish, integrated LED lighting, and is suitable for damp locations. Its dimensions are 60 inches in length, 5.5 inches in width, and 10.5 inches in height.

Hudson Valley Lighting Jonas LED Island Pendant in Black Nickel finish

Image 1.1: Hudson Valley Lighting Jonas LED Island Pendant. This image shows the full pendant light fixture with its sleek, linear design and Black Nickel finish.

2. Güvenlik Bilgileri

UYARI: To avoid the risk of electric shock, always disconnect power at the main circuit breaker or fuse box before beginning installation or performing any maintenance. Ensure the power is off before touching any electrical components.

3. Paket İçeriği

Ürünü dikkatlice ambalajından çıkarın ve tüm parçaların eksiksiz olduğundan emin olun. Herhangi bir parça eksik veya hasarlıysa, ürünü monte etmeye veya kurmaya çalışmayın. Yardım için müşteri hizmetleriyle iletişime geçin.

4. Kurulum ve Kurulum

Gerekli Aletler (dahil değildir): Yıldız tornavida, düz uçlu tornavida, kablo soyucu, elektrik bandı, güvenlik gözlüğü, merdiven.

Montaj Gerekli: Yes. Professional installation by a qualified electrician is recommended for safety and proper functionality.

  1. Gücü Kapatın: Locate the circuit breaker controlling the power to the installation location and turn it off. Verify power is off using a voltage test cihazı.
  2. Montajı Hazırlayın: Attach the mounting plate to the junction box in the ceiling using the provided screws. Ensure the plate is securely fastened.
  3. Yüksekliği Ayarlayın: Determine the desired hanging height for the pendant. The fixture has an adjustable suspension system. Adjust the length of the suspension rods or wires as needed before wiring.
  4. Kablo Bağlantıları: Connect the fixture's electrical wires to the corresponding wires from the junction box.
    • Bağlan siyah sabitleme teli siyah (Sıcak) besleme kablosu.
    • Bağlan beyaz sabitleme teli beyaz (nötr) besleme teli.
    • Bağlan yeşil veya çıplak bakır fixture ground wire to the yeşil veya çıplak bakır (topraklama) besleme kablosu.
    Tüm bağlantıları kablo somunlarıyla sabitleyin ve ek güvenlik için elektrik bandıyla sarın.
  5. Montaj Fikstürü: Carefully push the wired connections into the junction box. Align the fixture canopy with the mounting plate and secure it using the provided screws. Ensure no wires are pinched during this step.
  6. Gücü Geri Yükle: Tesisat güvenli bir şekilde monte edildikten sonra devre kesicideki gücü geri yükleyin.
Diagram of pendant light mounting hardware

Resim 4.1: Örn.ample of mounting hardware for a pendant light. This image illustrates typical components like the mounting plate and canopy used for ceiling installation.

5. Kullanım Talimatları

The Hudson Valley Lighting Jonas LED Island Pendant is controlled via a remote control. Ensure the remote control has working batteries (not included, typically AAA or CR2032 type) before use.

  1. Güç Açma/Kapatma: Press the 'ON' button on the remote to turn the light on. Press the 'OFF' button to turn the light off.
  2. Karartma: If your remote control includes dimming functions, use the '+' and '-' buttons to adjust the brightness level of the LED light.
  3. Pairing Remote (if necessary): If the fixture does not respond to the remote, you may need to pair it. Refer to the specific remote control instructions for pairing procedures, which typically involve turning the fixture power off and on, then pressing a pairing button on the remote within a short timeframe.

6. Bakım

Regular maintenance will help preserve the appearance and functionality of your Jonas LED Island Pendant.

7. Sorun Giderme

Aydınlatma armatürünüzle ilgili sorun yaşıyorsanız, aşağıdaki sorun giderme kılavuzuna bakın:

SorunOlası NedenÇözüm
Işık açılmıyor.Armatürde güç yok.Check circuit breaker or fuse. Ensure wall switch (if any) is on.
Gevşek kablo bağlantıları.Turn off power at the breaker. Check all wire connections inside the canopy.
Remote control batteries are dead or remote is not paired.Replace remote batteries. Refer to Section 5 for remote pairing instructions.
Işık beklenmedik şekilde titriyor veya sönüyor.Gevşek kablo bağlantıları.Turn off power at the breaker. Check all wire connections.
Uyumsuz dimmer anahtarı (varsa).Ensure a compatible LED dimmer switch is used. Consult a qualified electrician.

If the problem persists after attempting these solutions, contact a qualified electrician or Hudson Valley Lighting customer support.

8. Özellikler

ÖzellikDetay
MarkaHudson Vadisi Aydınlatması
Model AdıJonas
Model Numarası3060-BLNK
Bitiş RengiSiyah Nikel
MalzemeBrass, Alloy Steel, Iron, Glass
Ürün Boyutları60"U x 5.5"G x 10.5"Y
Işık Kaynağı TürüEntegre LED
Işık Kaynağı Sayısı1
Netage26 Watt
Parlaklık1122 Lümen
Renk Sıcaklığı3000 Kelvin (Sıcak Beyaz)
CRI90
Cilttage120 Volt
Nem DerecesiDamp Derecelendirildi
Kurulum TürüYarı Gömme Montaj
Kontrol YöntemiUzak
Ürün Ağırlığı11.9 Pound
UPC806134084103

9. Garanti ve Destek

This Hudson Valley Lighting fixture comes with a manufacturer's warranty. For specific details regarding warranty coverage and duration, please refer to the warranty information provided at the time of purchase or contact Hudson Valley Lighting directly.

For technical assistance, missing parts, or warranty claims, please contact Hudson Valley Lighting customer support. Have your model number (3060-BLNK) and proof of purchase ready when contacting support.

Hudson Valley Lighting Contact Information:
Please visit the official Hudson Valley Lighting website for the most current contact details, including phone numbers and support email addresses.

İlgili Belgeler - 3060-BLNK

Önview Hudson Valley Lighting Maywood 9020 Installation Instructions
Detailed installation guide for the Hudson Valley Lighting Maywood 9020 fixture. Includes safety warnings, step-by-step assembly instructions, and a parts list. Ensure proper electrical code compliance and safety precautions.
Önview Hudson Valley Lighting Fieldston L5429 Installation Guide
Detailed installation instructions for the Hudson Valley Lighting Fieldston L5429 lighting fixture, including safety warnings and part identification.
Önview Ravenswood 2861 Wall Sconce Installation Guide | Hudson Valley Lighting
Detailed installation instructions for the Hudson Valley Lighting Ravenswood 2861 wall sconce. Includes safety warnings, component overview, step-by-step assembly guidance, and a parts list.
Önview Hudson Valley Lighting Briscoe 2133 Installation Instructions
Detailed installation guide for the Hudson Valley Lighting Briscoe 2133 pendant light, including safety warnings, parts list, and step-by-step assembly instructions.
Önview Hudson Valley Lighting Buskirk 2452: Installation Guide & Safety Instructions
Detailed installation instructions and essential safety warnings for the Hudson Valley Lighting Buskirk 2452 wall sconce. Learn how to safely assemble and install your lighting fixture.
Önview Hudson Valley Lighting AH4628 Gerhard Installation Instructions
Detailed installation instructions for the Hudson Valley Lighting AH4628 Gerhard fixture, including safety warnings, diagram description, and parts list.