SIGMA Electronic Safe KSF 3525 User Manual

giriiş

Thank you for choosing the SIGMA KSF 3525 Electronic Safe. This safe is designed to provide secure storage for your valuables, such as money, jewelry, and important documents. It features a robust construction and an electronic locking system with programmable access codes. Please read this manual carefully before operating your safe to ensure proper setup, usage, and maintenance.

Güvenlik Bilgileri

• Always keep the override keys in a secure location, separate from the safe itself, and not inside the safe.
• Do not store the user manual or code programming instructions inside the safe.
• Ensure the safe is placed on a stable, level surface. For added security, consider bolting the safe to the floor or wall using the pre-drilled holes (mounting hardware not included).
• Keep the safe away from excessive moisture or direct sunlight.
• Do not attempt to force the safe open if the electronic lock malfunctions. Use the override key.

Paket İçeriği

Lütfen aşağıdaki öğelerin kutucuğunu işaretleyin:

• SIGMA KSF 3525 Electronic Safe
• Override Keys (2 pcs)
• Kullanım Kılavuzu (bu belge)
• Batteries (if included, otherwise 4x AA batteries required)

Kurmak

1. Paketin Açılması ve Yerleştirilmesi

Carefully remove the safe from its packaging. Choose a discreet and secure location for your safe. Ensure the surface is flat and stable. For maximum security, it is recommended to bolt the safe to a floor or wall using the pre-drilled holes at the back and bottom of the safe. (Mounting hardware is not supplied).

Resim: Ön view of the SIGMA KSF 3525 Electronic Safe, showing the digital keypad, rotary handle, and a grey finish.

2. Pillerin Takılması

1. Kasanın iç kapağında bulunan pil bölmesini bulun.
2. Pil kapağını açın.
3. Insert 4 AA batteries (1.5V) according to the polarity indicators (+/-).
4. Pil kapağını sıkıca kapatın.

3. Initial Opening (First Use)

For the first opening, use the override key:

1. Insert the override key into the keyhole, usually hidden behind a small cover on the keypad panel.
2. Anahtarı saat yönünde çevirin.
3. While holding the key turned, rotate the handle clockwise to open the safe door.
4. Remove the key and store it in a safe place, separate from the safe.

Kullanım Talimatları

1. Programming Your Personal Code

The safe allows programming of a personal code between 3 and 8 digits. It is recommended to program your code with the safe door open to avoid accidental lockout.

1. With the door open, press the red reset button located on the inside of the safe door, near the hinge. You will hear a beep, and the yellow light on the keypad will illuminate.
2. 15 saniye içinde, tuş takımına istediğiniz 3 ila 8 haneli kodu girin.
3. Press the "E" or "#" button (depending on model, usually "E") to confirm your new code. You will hear a confirmation beep.
4. Test your new code with the door open: Enter your code, then press "E" or "#". The green light should illuminate, and you should be able to turn the handle.

Important: Remember your code. If you forget it, you will need to use the override key.

2. Kasayı Açma

1. Enter your personal 3 to 8 digit code on the keypad.
2. Press the "E" or "#" button.
3. If the code is correct, the green light will illuminate. Within 5 seconds, turn the handle clockwise to open the door.
4. If the code is incorrect, the yellow light will flash, and you will hear a beep. Re-enter the correct code.

3. Kasanın Kapatılması ve Kilitlenmesi

1. Kasa kapısını kapatın.
2. Kilitleme cıvatalarını devreye sokmak için kolu saat yönünün tersine çevirin.
3. The safe is now locked.

4. Düşük Pil Uyarısı

When the batteries are low, the red light will illuminate when you enter your code. Replace the batteries as soon as possible. Your code will be retained even if the batteries are completely drained.

Bakım

• Kasanın dış yüzeyini yumuşak bir bezle temizleyin.amp bezle silin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
• Pil seviyesini düzenli olarak kontrol edin ve pilleri yılda bir kez veya düşük pil göstergesi göründüğünde değiştirin.
• Do not lubricate the electronic lock or keypad.
• Ensure the locking bolts move freely.

Sorun giderme

Özellikler

Garanti ve Destek

Your SIGMA KSF 3525 Electronic Safe comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, replacement parts, or warranty claims, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

For further assistance, please visit the official SIGMA websitesine bakın veya müşteri hizmetleri departmanıyla iletişime geçin.