Retro-Bit BIG6 2.4 GHz Wireless Arcade Controller Instruction Manual

giriiş

The Retro-Bit BIG6 2.4 GHz Wireless Arcade Controller is designed for an enhanced gaming experience across multiple platforms, including Sega Genesis/Mega Drive consoles, PC, Mac, and other USB-enabled devices. This manual provides detailed instructions for the setup, operation, and maintenance of your controller.

Paket İçeriği

Paketin içinde tüm öğelerin mevcut olduğundan emin olun:

• Retro-Bit BIG6 Wireless Controller
• SEGA Genesis Wireless Receiver
• USB Kablosuz Alıcı
• USB-C Charge Cable (3.3ft / 1m)

Image: The Retro-Bit BIG6 Wireless Arcade Controller, including the controller itself, the Sega Genesis receiver, the USB receiver, and the product packaging.

Ürün Bittiview

The BIG6 controller features a classic 6-button layout with modern enhancements for versatile gaming.

Kontrolör Düzeni

• Yön Tuş Takımı (D-Pad): Hareket ve navigasyon için.
• Eylem Düğmeleri (A, B, C, X, Y, Z): Six primary action buttons.
• Başlat Düğmesi: For pausing games or confirming selections.
• Ana menü tuşu: For system-level functions (e.g., on Switch or PC).
• Seçim Düğmesi: For additional in-game or system functions.
• Shoulder Buttons (L, R): Located on the top edge for modern gaming controls.

Resim: Ön view of the Retro-Bit BIG6 Wireless Arcade Controller, showing the D-Pad, six action buttons (A, B, C, X, Y, Z), Start button, and Sega Genesis logo.

Resim: Üst view of the Retro-Bit BIG6 Wireless Arcade Controller, highlighting the L and R shoulder buttons.

Şarj Portu

The controller features a USB-C port for charging its internal battery.

Resim: Arka view of the Retro-Bit BIG6 Wireless Arcade Controller, displaying the central USB-C charging port and the L and R shoulder buttons.

Kurmak

1. Kontrol Cihazının Şarj Edilmesi

1. Connect the supplied USB-C charge cable to the controller's USB-C port.
2. Kablonun diğer ucunu bir USB güç kaynağına (örneğin, bilgisayarın USB portu, USB duvar adaptörü) bağlayın.
3. The LED indicator on the controller will illuminate during charging and turn off when fully charged. A full charge typically takes approximately 2-3 hours.

2. Connecting to SEGA Genesis/Mega Drive Console

1. Insert the SEGA Genesis Wireless Receiver into a controller port on your Genesis/Mega Drive console.
2. Ensure the console is powered on. The receiver's LED will blink, indicating it is searching for a controller.
3. Press and hold the Home button on the BIG6 controller for a few seconds to power it on. The controller's LED will blink.
4. Once paired, both the controller's and receiver's LEDs will become solid.

3. Connecting to PC, Mac, or USB-Enabled Devices

1. Insert the USB Wireless Receiver into an available USB port on your PC, Mac, or other compatible device.
2. The receiver's LED will blink, indicating it is searching for a controller.
3. Press and hold the Home button on the BIG6 controller for a few seconds to power it on. The controller's LED will blink.
4. Once paired, both the controller's and receiver's LEDs will become solid. The operating system should automatically detect the controller.

Kullanım Talimatları

Güç Açık/Kapalı

• Güç Açık: Press and hold the Home button for approximately 3 seconds.
• Kapat: The controller will automatically power off after a period of inactivity to conserve battery. To manually power off, press and hold the Home button for approximately 5-7 seconds until the LED indicator turns off.

Temel Kullanım

Once connected, the controller functions as a standard gamepad. Button assignments may vary depending on the game or system. Refer to your game's instructions for specific control schemes.

Bakım

• Temizlik: Kumandayı temizlemek için yumuşak ve kuru bir bez kullanın. Sert kimyasallar veya aşındırıcı malzemeler kullanmaktan kaçının.
• Depolamak: Kontrol cihazını serin, kuru ve doğrudan güneş ışığından ve aşırı sıcaklıklardan uzak bir yerde saklayın.
• Pil Bakım: To prolong battery life, avoid fully discharging the controller frequently. Charge the controller regularly, even if not in use for extended periods.

Sorun giderme

Kumanda Bağlanmıyor/Eşleşmiyor

• Kontrol cihazının şarjlı olduğundan emin olun.
• Verify that the correct receiver (Genesis or USB) is securely plugged into the target device.
• Make sure the controller and receiver are within close proximity (recommended within 10 feet).
• If pairing issues persist, locate the small reset pinhole on the back of the controller. Use a thin object (like a paperclip) to press the button inside the pinhole for a few seconds, then attempt to re-pair.

Buttons Unresponsive or Incorrectly Mapped

• Kontrol cihazının tam şarjlı olduğundan ve doğru şekilde bağlandığından emin olun.
• For PC/Mac, check the device's controller settings or calibration tools to ensure proper recognition and mapping.
• Some games may require specific controller configurations. Consult the game's manual.

Kısa Pil Ömrü

• Kullanmadan önce kontrol cihazının tamamen şarj olduğundan emin olun.
• Tekrarlanan şarj döngüleri nedeniyle pil performansı zamanla düşebilir.
• Operating in environments with extreme temperatures can affect battery performance.

Özellikler

Garanti ve Destek

For warranty information, technical support, or further assistance, please visit the official Retro-Bit webSite üzerinden satın alabilir veya müşteri hizmetleri departmanıyla iletişime geçebilirsiniz. Satın alma belgenizi garanti talepleriniz için saklayın.

Retro-Bit Official Webalan: www.retro-bit.com