1. Giriş
This instruction manual provides essential information for the proper installation, use, and maintenance of your Scheppach HEPA Filter 30L (Model 7907709719). This filter is designed for use with Scheppach NTS30 and NTS30 Premium wet/dry vacuum cleaners, ensuring efficient filtration during dry vacuuming operations. Please read this manual thoroughly before installation and retain it for future reference.
2. Güvenlik Talimatları
- Always disconnect the vacuum cleaner from the power supply before installing, removing, or cleaning the filter.
- Ensure the filter is correctly seated and secured before operating the vacuum cleaner.
- Do not use a damaged filter. Replace it immediately if any damage is observed.
- This HEPA filter is primarily for dry vacuuming. Refer to your vacuum cleaner's manual for wet vacuuming filter requirements.
- Ambalaj malzemelerini çocuklardan uzak tutunuz.
3. Paket İçeriği
Upon unpacking, please verify that all items are present and undamaged. If any parts are missing or damaged, contact your retailer.
- 1 x Scheppach HEPA Filter 30L (Model 7907709719)
4. Kurulum
Follow these steps to install the HEPA filter into your compatible Scheppach NTS30 or NTS30 Premium wet/dry vacuum cleaner. Always refer to your vacuum cleaner's specific instruction manual for detailed diagrams and safety precautions.
- Gücü Kesin: Ensure the vacuum cleaner is unplugged from the electrical outlet before beginning installation.
- Open Vacuum Cleaner: Release the clips or latches on the vacuum cleaner head and carefully lift it off the collection tank.
- Eski Filtreyi Kaldır (eğer varsa): If an old filter is present, carefully remove it. Dispose of used filters responsibly.
- Position New Filter: Place the new Scheppach HEPA Filter onto the filter cage or motor housing inside the vacuum cleaner head. Ensure it sits flush and securely. The rubber seal at the top of the filter should create a tight seal.
- Güvenli Filtre: Depending on your vacuum model, there might be a locking mechanism (e.g., a nut or a twist-lock) to secure the filter in place. Ensure it is tightened sufficiently to prevent air leaks.
- Reassemble Vacuum Cleaner: Carefully place the vacuum cleaner head back onto the collection tank and secure the clips or latches.
- Kurulumu Doğrulayın: Before plugging in, visually inspect that the filter is correctly installed and the vacuum cleaner is properly reassembled.
Image 1: Scheppach HEPA Filter 30L. This image shows the cylindrical pleated filter with a black rubber seal at the top and a clear plastic base. The pleats are visible, indicating the large surface area for filtration.
5. Operasyon
The Scheppach HEPA Filter is designed for dry vacuuming applications. Once correctly installed, it effectively captures fine dust particles, allergens, and other debris, ensuring cleaner exhaust air. For wet vacuuming, this HEPA filter must be removed, and a foam filter (typically supplied with the vacuum cleaner) should be installed instead, as per your vacuum cleaner's manual.
6. Bakım
6.1. Filtrenin Temizlenmesi
Regular cleaning helps maintain the filter's efficiency and extends its lifespan. Always disconnect the vacuum cleaner from the power supply before cleaning.
- Kuru Temizleme: Gently tap the filter against a hard surface (e.g., inside a trash can) to dislodge accumulated dust. You can also use a soft brush or compressed air (from a safe distance) to clean the pleats.
- Sudan Kaçının: Do not wash this HEPA filter with water, as it can damage the filter media and reduce its effectiveness.
- Sıklık: Clean the filter after each significant dry vacuuming session or when you notice a decrease in suction power.
6.2. Filtrenin Değiştirilmesi
Over time, even with regular cleaning, the filter's efficiency will diminish. Replace the HEPA filter when:
- Suction power remains low despite cleaning.
- Dust or fine particles are visibly escaping from the vacuum's exhaust.
- The filter media appears damaged, torn, or excessively clogged.
- As a general guideline, replace the filter every 6-12 months with regular use, or more frequently if used in dusty environments.
Use only genuine Scheppach replacement filters (Model 7907709719) to ensure optimal performance and compatibility.
7. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Düşük emiş gücü | Tıkalı filtre | Clean or replace the HEPA filter. Check other components of the vacuum cleaner (hose, nozzle, tank) for blockages. |
| Dust escaping from exhaust | Hasarlı veya yanlış takılmış filtre | Ensure the filter is correctly seated and sealed. Inspect the filter for tears or damage; replace if necessary. |
| Filtre uymuyor. | Incorrect filter model | Verify that you have the correct Scheppach HEPA Filter 30L (Model 7907709719) for your NTS30 or NTS30 Premium vacuum cleaner. |
8. Özellikler
| Marka | Scheppach |
| Model Numarası | 7907709719 |
| Uyumlu Elektrikli Süpürge Modelleri | Scheppach NTS30, Scheppach NTS30 Premium |
| Filtre Türü | HEPA Filtre |
| Capacity (Vacuum) | 30 Liters (for compatible vacuum cleaners) |
| Ürün Ağırlığı | 7 ons (yaklaşık 198 gram) |
| Ürün Boyutları | 6.69 x 6.69 x 5.91 inç (yaklaşık 17 x 17 x 15 cm) |
| Parça Sayısı | 1 |
9. Garanti ve Destek
For information regarding warranty coverage for your Scheppach HEPA Filter, please refer to the warranty documentation provided with your original Scheppach NTS30 or NTS30 Premium vacuum cleaner, or visit the official Scheppach website. For technical support or inquiries, please contact Scheppach customer service directly.
