Technoline WS8016

Technoline WS 8016 Digital Radio-Controlled Wall Clock

Kullanım Kılavuzu

1. Giriş

The Technoline WS 8016 is a modern radio-controlled wall clock designed for clear readability and versatile display options. It automatically synchronizes with the DCF-77 radio signal for precise timekeeping. This manual provides detailed instructions for setting up and operating your clock.

Temel özellikler şunlardır:

2. Önemli Güvenlik Bilgileri

3. Paket İçeriği

Not: 2 x AA Mignon LR06 batteries are not included and must be purchased separately.

4. Ürün Bittiview

Familiarize yourself with the clock's display and controls.

Ön view of the Technoline WS 8016 digital clock display showing time, date, temperature, humidity, and alarm icons.

Şekil 1: Main display of the Technoline WS 8016 clock. It clearly presents the current time (e.g., 10:30), the radio signal reception icon, two alarm indicators (1 M-F, 2 S-S), indoor temperature (e.g., 23.2°C), weekday (e.g., MONTAG), date (e.g., 29/JAN/2019), and indoor humidity (e.g., 76% RH).

Technoline WS 8016 digital clock with dimensions indicated: 22.5cm width and 14.3cm height.

Şekil 2: Physical dimensions of the Technoline WS 8016 clock, measuring 22.5 cm in width and 14.3 cm in height.

Control Buttons (Typically located on the back or side):

5. Kurulum

5.1 Pil Kurulumu

  1. Saatin arka tarafında bulunan pil bölmesi kapağını bulun.
  2. Kapağı çıkarın.
  3. Insert 2 x AA Mignon LR06 batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
  4. Pil bölmesi kapağını güvenli bir şekilde yerine takın.

5.2 Otomatik Zaman Senkronizasyonu (DCF-77)

After battery insertion, the clock will automatically begin searching for the DCF-77 radio signal. This process can take several minutes to an hour, depending on your location and environmental conditions.

6. Kullanım Talimatları

6.1 Manuel Zaman Ayarı

If the radio signal is unavailable or you prefer to set the time manually:

  1. Basılı tutun AYARLAMAK button for approximately 3 seconds to enter the manual setting mode. The first adjustable value will flash.
  2. Kullanın UP or AŞAĞI buttons to adjust the flashing value (e.g., hour, minute).
  3. Basmak AYARLAMAK briefly to confirm the current setting and move to the next adjustable parameter.
  4. Repeat steps 2 and 3 for all settings: hour, minute, 12/24h format, time zone, year, month, day, weekday language, and temperature unit.
  5. Ayarlar modundan çıkmak için tuşuna basın. MOD button or wait for 15 seconds without pressing any button.

6.2 12/24 Saat Formatı

Normal saat görüntüleme modunda, tuşuna basın. 12/24 12 saatlik (AM/PM göstergeli) ve 24 saatlik formatlar arasında geçiş yapmak için düğme.

6.3 Saat Dilimi Ayarı

During manual time setting (Section 6.1), you can adjust the time zone offset (e.g., +1, -1 hour) if your location is outside the standard DCF-77 signal's time zone.

6.4 Date and Weekday Language

During manual time setting (Section 6.1), you can select the display language for the weekday. Options typically include English, German, French, Spanish, Italian, Dutch, and Danish.

6.5 Sıcaklık Birimi

Normal saat görüntüleme modunda, tuşuna basın. °C/°F button to switch the indoor temperature display between Celsius and Fahrenheit.

6.6 Alarm Ayarları

The clock features two independent alarms: Alarm 1 (typically for Monday-Friday) and Alarm 2 (typically for Saturday-Sunday).

  1. Basın ALARM button repeatedly to cycle through Alarm 1, Alarm 2, and Alarm Off display modes.
  2. To set an alarm, select the desired alarm (Alarm 1 or Alarm 2) and then press and hold the ALARM button for approximately 3 seconds. The alarm hour will flash.
  3. Kullanın UP or AŞAĞI Alarm saatini ayarlamak için düğmelere basın. ALARM to confirm and move to the alarm minute setting.
  4. Kullanın UP or AŞAĞI buttons to adjust the alarm minute. Press ALARM Alarm ayar modunu onaylamak ve çıkmak için.
  5. To activate or deactivate an alarm, briefly press the ALARM button when the alarm time is displayed. An alarm icon (e.g., a bell) will appear on the display when the alarm is active and disappear when it is deactivated.

7. Bakım ve Onarım

Temizlik: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical agents, as these may damage the display or casing.

Pil Değişimi: Replace the batteries when the low battery indicator appears on the display. Always replace both batteries simultaneously with new ones of the same type. Do not mix old and new batteries or different battery types.

8. Sorun Giderme Kılavuzu

SorunÇözüm
No time display / Incorrect timeCheck battery installation and ensure batteries have sufficient charge. Ensure the clock is within range of the DCF-77 signal. If the signal is weak or unavailable, manually set the time as described in Section 6.1.
Radio signal icon not displayed or flashing continuouslyMove the clock closer to a window or an open area. Avoid placing it near large metal objects or electronic devices (TVs, computers, microwaves) that may cause interference. Wait for the next automatic synchronization attempt.
Temperature/Humidity readings are inaccurateEnsure the clock is not exposed to direct sunlight, drafts, or heat sources (e.g., radiators, appliances). Allow time for readings to stabilize after initial setup or relocation.
Alarm çalmıyorVerify that the alarm is activated (alarm icon displayed). Check that the alarm time is set correctly. Ensure batteries are not depleted.

9. Teknik Özellikler

10. Garanti ve Müşteri Desteği

This product comes with a standard manufacturer's warranty. Please refer to the warranty card or documentation included with your purchase for specific terms and conditions.

For technical support, troubleshooting assistance, or service inquiries, please contact your retailer or visit the official Technoline webdaha fazla bilgi için site.

İlgili Belgeler - WS8016

Önview WS8014 Radyo Kontrollü Saat ve Hava İstasyonu Kullanım Kılavuzu
WS8014 radyo kontrollü saat ve hava durumu istasyonunun özelliklerini, kurulumunu, çalışmasını, teknik özelliklerini ve güvenlik bilgilerini kapsayan kullanıcı kılavuzu.
Önview WT 498 Radyo Kontrollü Saat Kullanım Kılavuzu
Bu kullanım kılavuzu, otomatik zaman senkronizasyonu, alarm fonksiyonları ve sıcaklık göstergesi özelliklerine sahip WT 498 radyo kontrollü saatin kurulumu, çalıştırılması ve sorun giderme konusunda ayrıntılı rehberlik sağlar.
Önview Ay Fazı Saati Kullanım Kılavuzu - Radyo Kontrollü Zaman, Tarih, Sıcaklık
Technoline'ın DCF-77 radyo kontrollü ay fazı saati için kapsamlı kullanım kılavuzu; kurulum, özellikler, manuel ayarlar ve bakım detaylarını içermektedir.
Önview WT280 Radyo Kontrollü Saat Kullanım Kılavuzu
Bu kılavuz, manuel zaman ayarı, alarm fonksiyonları, sıcaklık göstergesi ve dil seçimi gibi özellikler de dahil olmak üzere WT280 radyo kontrollü saatin kurulumu ve çalıştırılmasıyla ilgili talimatları sağlar.
Önview WS 6750 Hava İstasyonu Kullanım Kılavuzu - TechnoLine
TechnoLine WS 6750 hava istasyonunun kurulumunu, özelliklerini, çalışmasını ve sorun gidermesini kapsayan kapsamlı kullanıcı kılavuzu. Sıcaklık, nem, hava basıncı, saat, alarmlar ve daha fazlası hakkında bilgi edinin.
Önview TechnoLine WT 753 Radyo Kontrollü Alarm Saati: Kullanım Kılavuzu ve Kurulum Rehberi
TechnoLine WT 753 radyo kontrollü alarm saati için kapsamlı kılavuz; hızlı kurulum, zaman sinyali alımı, alarm ayarları, önlemler ve imha bilgileri konularını kapsamaktadır.