Prity K2 CP

Prity K2 CP 10 kW Wood Stove User Manual

Model: K2 CP | Brand: Prity

1. Giriş

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Prity K2 CP 10 kW wood stove. Please read these instructions carefully before using the appliance and retain them for future reference. Proper adherence to these guidelines will ensure optimal performance and longevity of your stove.

Prity K2 CP Wood Stove with fire burning in the combustion chamber

Resim 1: Ön view of the Prity K2 CP wood stove with a visible fire through the ceramic glass door.

1.1 Ürün Üzeriview

The Prity K2 CP is a 10 kW wood-burning stove designed for heating residential spaces. It features a robust construction with a reinforced combustion chamber lined with refractory bricks for heat accumulation and improved combustion temperature. The stove is equipped with heat-resistant ceramic glass, a cast iron grate, and two manual dampers for precise air and flame intensity control. An integrated compartment is provided for storing and drying wood.

1.2 Güvenlik Bilgileri

WARNING: Improper installation, adjustment, alteration, service, or maintenance can cause injury or property damage. Read the installation, operating, and maintenance instructions thoroughly before installing or servicing this equipment.

  • Always ensure adequate ventilation in the room where the stove is installed.
  • Maintain required clearances to combustible materials as specified in local building codes and this manual.
  • Only use recommended fuels (wood, coal). Do not burn plastics, treated wood, or other unsuitable materials.
  • Kurum birikimini ve baca yangınlarını önlemek için baca sistemini düzenli olarak kontrol edin ve temizleyin.
  • Çocukları ve evcil hayvanları ocağın sıcak yüzeylerinden uzak tutun.
  • Install smoke and carbon monoxide detectors in your home.

2. Kurulum ve Kurulum

Installation must be performed by a qualified professional and comply with all local and national building and fire safety regulations.

2.1 Paketin Açılması ve Muayene

Ocağı dikkatlice ambalajından çıkarın ve taşıma sırasında oluşmuş olabilecek herhangi bir hasar olup olmadığını kontrol edin. Herhangi bir hasarı derhal tedarikçinize bildirin. Paketleme listesinde belirtilen tüm bileşenlerin mevcut olduğundan emin olun.

2.2 Konum ve İzinler

Choose a suitable location for the stove, ensuring it is on a non-combustible floor or hearth. Maintain the minimum clearances to combustible walls and materials as specified by local regulations and the manufacturer. The flue pipe connection is at the top of the stove.

Prity K2 CP Wood Stove with Ecodesign 2022 and Blm SchV2 labels

Image 2: Prity K2 CP wood stove displaying Ecodesign 2022 and Blm SchV2 certifications, indicating compliance with environmental standards.

2.3 Flue System Connection

Connect the stove to a suitable chimney or flue system with a diameter of 130 mm. Ensure all connections are sealed properly to prevent smoke leakage. The chimney must be in good condition, free of obstructions, and capable of providing adequate draft.

2.4 Initial Firing (Curing)

Before regular use, the stove must be cured to allow the paint and internal components to settle. This process involves several small, low-temperature fires. During curing, some smoke and odor may be emitted; ensure the area is well-ventilated. Avoid high temperatures during the first few fires.

3. Kullanım Talimatları

Understanding how to properly operate your Prity K2 CP stove is crucial for safety, efficiency, and comfort.

3.1 Fuel Type

The Prity K2 CP stove is designed to burn wood and coal. For optimal performance and to minimize creosote buildup, use dry, seasoned hardwood. Wood with a moisture content of 20% or less is recommended. Avoid burning:

  • Islak veya baharatsız ahşap
  • Garbage, plastics, or chemical waste
  • İşlenmiş veya boyalı ahşap
  • Yanıcı sıvılar

3.2 Ocağın Yakılması

  1. Open both the front air supply damper and the smoke damptamamen.
  2. Place crumpled paper or natural firelighters on the cast iron grate.
  3. Add a small amount of kindling (small, dry pieces of wood) on top of the firelighters.
  4. Light the firelighters.
  5. Once the kindling is burning well, gradually add larger pieces of wood.
  6. Close the combustion chamber door once the fire is established.

3.3 Hava Kontrolü

The stove is equipped with two manual dampers:

  • Ön Hava Dampee: Located at the front, this controls the primary air supply to the combustion chamber. Open it for ignition and when adding new fuel. Close it partially to reduce the burn rate and conserve fuel.
  • Duman Dampee: This regulates the intensity of the flame and the draft through the flue. Adjust it to achieve a steady, efficient burn.

Adjusting these dampers allows you to control the heat output and efficiency. A bright, lively flame indicates good combustion. Excessive smoke or a dull, smoldering fire suggests insufficient air or wet fuel.

3.4 Yakıt ikmali

When adding more fuel, open the front air damper and smoke damper fully for a few minutes before opening the combustion chamber door. This helps to prevent smoke from entering the room. Carefully place new logs onto the existing embers and close the door. Adjust the dampers once the new fuel has ignited.

4. Bakım

Regular maintenance is essential for the safe and efficient operation of your Prity K2 CP stove.

4.1 Kül Temizleme

Remove ash regularly from the ash pan, typically when it is about two-thirds full. Do not allow ash to build up and touch the bottom of the grate, as this can restrict airflow and damage the grate. Always use a metal container with a tight-fitting lid for ash disposal, as embers can remain hot for days.

4.2 Glass Cleaning

The ceramic glass in the combustion chamber door can become dirty with soot. Clean it when the stove is cold using a specialized glass cleaner for wood stoves or a damp cloth dipped in ash. Avoid abrasive cleaners or tools that could scratch the glass.

4.3 Flue and Chimney Cleaning

The flue pipe and chimney should be inspected and cleaned at least once a year, or more frequently depending on usage and fuel type. Creosote buildup is a fire hazard. This task should be performed by a certified chimney sweep.

4.4 Genel Muayene

Periodically check the door seals for wear and tear. Replace them if they are damaged to ensure an airtight seal. Inspect the refractory bricks for cracks or damage; while minor cracks are normal, severely damaged bricks should be replaced.

5. Sorun Giderme

This section addresses common issues you might encounter with your wood stove.

SorunOlası NedenÇözüm
Smoke entering the roomInsufficient draft, blocked chimney, opening door too quickly, wet fuel.Check chimney for blockages, ensure dampers are open, pre-heat flue, use dry fuel, open door slowly.
Zayıf ısı çıkışıWet fuel, insufficient air, stove too small for space, excessive ash.Use dry fuel, adjust air dampers, remove ash, ensure stove size is appropriate.
Rapid burning of fuelToo much air supply, faulty door seal.kapalı hava dampers partially, check and replace door seals if necessary.
Cam çabuk kararırWet fuel, low burning temperature, insufficient air wash.Use dry fuel, ensure adequate air supply, clean glass regularly.

6. Özellikler

Technical data for the Prity K2 CP 10 kW Wood Stove.

ÖzellikDeğer
MarkaPrity (BALKAN ENERGY)
ÖrnekK2 CP
Ürün Boyutları (Y x G x D)810x500x510 mm
Combustion Chamber Dimensions (H x W x D)400x365x410 mm
Isıtma Gücü10 kW
Isıtma Yüzey AlanıYaklaşık 57 m²
Yeterlik75-80%
Baca Borusu Çapı130 mm
Baca PozisyonuTepe
Yakıt TürüWood, Coal
MalzemeStainless Steel (Body), Cast Iron (Grate, Top Plate), Ceramic Glass
RenkGrafit Siyahı
Ağırlık90 kilo
Enerji SınıfıA
SertifikasyonCE, EN Standard
EPREL Kayıt Numarası1271282

7. Garanti ve Destek

For warranty information, technical support, or spare parts, please contact the manufacturer or your retailer.

Please have your model number (K2 CP) and purchase date available when contacting support.

İlgili Belgeler - K2 CP

Önview Prity Kazanları: Teknik Tanım, Kurulum ve Kullanım Kılavuzu
Prity marka konut tipi kombiler için kapsamlı kılavuz; katı yakıtlı ve pelet modelleri için teknik özellikler, kurulum prosedürleri, kullanım talimatları, bakım ve sorun giderme konularını kapsamaktadır.
Önview Truma Combi (E) Kullanım Talimatları ve Teknik Kılavuz
Truma Combi (E) karavan ve motokaravan ısıtıcısı için kapsamlı kullanım kılavuzu ve teknik özellikler. Kurulum, çalıştırma, güvenlik, bakım, sorun giderme ve garanti bilgilerini kapsar.
Önview Lochinvar Copper-Fin II Ticari Havuz Isıtıcısı CP-SPEC-10 Teknik Özellikleri
Lochinvar Copper-Fin II ticari havuz ısıtıcısı, CP-SPEC-10 modeli için özellikler, yapı, kontroller ve havuz ve spa uygulamalarına yönelik sertifikaları kapsayan ayrıntılı teknik özellikler.
Önview Truma CP plus Kullanım Talimatları ve Sorun Giderme Kılavuzu
Truma CP plus kontrol paneli için, Combi gaz ve dizel ısıtıcılar ile klima sistemleri için kurulum, çalıştırma, fonksiyonlar ve arıza teşhisini kapsayan kapsamlı kullanım talimatları ve sorun giderme kılavuzu.
Önview Truma AquaGo Kireç Çözme Talimatları ve Bakım Kılavuzu
Truma AquaGo karavan su ısıtıcınızın kireçten arındırılması için ayrıntılı talimatlar. Bu kılavuz, Analog Kadranlı ve CP plus kontrolörlü modeller için geçerli prosedürleri ve temizleme modunda takılı kalma gibi yaygın sorunlar için sorun giderme adımlarını kapsamaktadır.