TOTAL Lithium-ion Air Compressor TACLI2003 User Manual

1. Giriş

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your TOTAL Lithium-ion Air Compressor, model TACLI2003. Please read this manual thoroughly before using the compressor and retain it for future reference.

2. Güvenlik Talimatları

Bu ürünü kullanırken yangın, elektrik çarpması ve kişisel yaralanma riskini azaltmak için her zaman temel güvenlik önlemlerine uyun.

• Tüm talimatları okuyunuz: Kompresörün kontrollerini ve doğru kullanımını öğrenin.
• Çalışma Alanı: Çalışma alanınızı temiz ve iyi aydınlatılmış tutun. Dağınık veya karanlık alanlar kazalara davetiye çıkarır.
• Elektriksel Güvenlik: This unit operates on 40V (2x20V) lithium-ion batteries. Ensure batteries and charger (not included) are compatible with TOTAL 20V tools. Do not expose the compressor to rain or wet conditions.
• Kişisel Güvenlik: Always wear eye protection. Use hearing protection when operating the compressor for extended periods. Do not overreach; maintain proper footing and balance at all times.
• Kompresörün Kullanımı ve Bakımı: Do not operate the compressor if the power switch does not turn it on and off. Disconnect the battery pack before making any adjustments, changing accessories, or storing the compressor. Store idle compressors out of the reach of children and do not allow persons unfamiliar with the compressor or these instructions to operate it.
• Basınç Güvenliği: Never exceed the maximum pressure rating of any accessory or item being inflated. The maximum pressure for this compressor is 9.3 bar (135 psi).
• Bakım: Have your compressor serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

3. Paket İçeriği

Upon unpacking, ensure all items listed below are present and undamaged. If any parts are missing or broken, please contact your retailer.

• TOTAL Lithium-ion Air Compressor (TACLI2003)
• 1 pc Steel Ball / Air Needle
• 1 pc Plastic Ball Needle
• 1 pc Schrader Presta Valve Adaptor

Not: Batteries and charger are not included with this unit and must be purchased separately.

4. Ürün Bittiview

Şekil 1: Sol ön view of the TOTAL Lithium-ion Air Compressor TACLI2003, showcasing the main unit, 6L tank, and control panel with gauges.

Şekil 2: Close-up of the compressor's control panel, featuring two pressure gauges (tank and output), a power switch, and a pressure regulator knob.

Şekil 3: Ayrıntılı view of the pressure gauges and the adjustable pressure regulator knob, allowing precise control over air output.

Şekil 4: Another close-up of the pressure regulator knob, which is used to set the desired output air pressure.

Şekil 5: Taraf view showing the two battery compartments designed for 20V TOTAL lithium-ion batteries (not included).

Şekil 6: Arka view of the compressor, highlighting the integrated storage compartment for various nozzles and adaptors.

Şekil 7: Close-up of the accessory storage, showing the included steel ball/air needle, plastic ball needle, and Schrader Presta valve adaptor.

Şekil 8: Detail of the pressure relief valve, an important safety feature designed to release excess pressure from the tank.

5. Kurulum

5.1 Pil Kurulumu

1. Ensure the compressor's power switch is in the 'OFF' position.
2. Locate the two battery compartments on the side of the compressor (refer to Figure 5).
3. Insert two fully charged TOTAL 20V lithium-ion batteries (2.0Ah or 4.0Ah compatible) into the compartments until they click securely into place.
4. To remove batteries, press the release tabs on each battery and pull them out.

5.2 Aksesuarların Bağlanması

1. Identify the quick-connect air outlet on the compressor.
2. Select the appropriate accessory (e.g., air needle, valve adaptor) for your task.
3. Attach the accessory to an air hose (not included) and then connect the air hose to the compressor's air outlet. Ensure a secure connection to prevent air leaks.

6. Kullanım Talimatları

6.1 Powering On and Initial Pressure Build-up

1. With batteries installed and accessories connected, ensure the pressure regulator knob (Figure 3) is turned fully counter-clockwise to the lowest setting.
2. Flip the power switch to the 'ON' position. The compressor will begin to fill the 6L air tank.
3. Monitor the tank pressure gauge. The compressor will automatically shut off once the maximum tank pressure (9.3 bar / 135 psi) is reached.

6.2 Çıkış Basıncının Ayarlanması

1. Once the tank is full, slowly turn the pressure regulator knob clockwise to increase the output pressure.
2. Observe the output pressure gauge to set the desired working pressure for your tool or inflation task.
3. Never exceed the recommended pressure for the item being inflated or the connected air tool.

6.3 İşletim

1. Engage your air tool or begin inflation. The compressor will cycle on and off automatically to maintain the set output pressure as air is consumed.
2. When finished, turn the power switch to 'OFF'.
3. Release any remaining pressure from the air hose and tool before disconnecting.

7. Bakım

Düzenli bakım, hava kompresörünüzün optimum performans göstermesini sağlar ve kullanım ömrünü uzatır.

• Günlük:
• Inspect the compressor for any visible damage, loose connections, or air leaks.
• Check the air filter (if accessible) for excessive dirt and clean if necessary.
• Weekly/After Each Use:
• Wipe down the exterior of the compressor with a clean, damp kumaş. Sert kimyasallar kullanmayın.
• Ensure the pressure relief valve (Figure 8) operates freely by pulling its ring briefly to release a small amount of air.
• Pil Bakım:
• Always store batteries in a cool, dry place away from direct sunlight.
• Pillerin sağlığını korumak için, saklamadan önce ve uzun süreli saklama dönemlerinde periyodik olarak pilleri tamamen şarj edin.

8. Sorun Giderme

9. Özellikler

10. Garanti ve Destek

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your purchase or contact your authorized TOTAL tools dealer. Keep your purchase receipt as proof of purchase for any warranty claims.