Einhell TC-PW 610 Kompakt Pnömatik Darbeli Anahtar Kullanım Kılavuzu

giriiş

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Einhell TC-PW 610 Compact Pneumatic Impact Wrench. Please read this manual thoroughly before using the tool to ensure proper handling and to maximize its lifespan. This powerful air impact wrench is designed for demanding tasks such as changing tires on vehicles, offering a maximum torque of 610 Nm and a compact design for accessibility.

Güvenlik Talimatları

Yaralanmaları ve aletin hasar görmesini önlemek için her zaman aşağıdaki güvenlik önlemlerine uyun:

• Güvenlik gözlüğü, işitme koruması ve eldiven gibi uygun kişisel koruyucu ekipman (KKD) giyin.
• Aksesuar değiştirmeden veya bakım yapmadan önce hava beslemesinin bağlantısının kesildiğinden emin olun.
• Do not exceed the maximum operating pressure of 8 bar.
• Ellerinizi ve bol giysileri hareketli parçalardan uzak tutun.
• Use only genuine Einhell accessories or those approved for use with this tool.
• Çalıştırma sırasında aleti sıkıca tutun.
• Aleti çocukların erişemeyeceği, kuru ve güvenli bir yerde saklayın.
• Regularly inspect the air hose for damage and ensure secure connections.

Ürün Bittiview ve Bileşenler

The Einhell TC-PW 610 Compact Pneumatic Impact Wrench comes with several components designed for efficient operation.

Figure 1: The Einhell TC-PW 610 Compact Pneumatic Impact Wrench, including its transport case and various accessories.

Dahil Aksesuarlar:

• 3 x Impact Wrench Sockets (17mm, 19mm, 21mm)
• 1 x Empty Oil Burette (for lubrication)
• 1 x Connection Fitting (European Shape)
• 1 x Teflon Sealing Strip (10 m)
• 1 x Transport and Storage Case

Şekil 2: Ayrıntılı view of the included accessories: three color-coded sockets (17mm, 19mm, 21mm), an air connection fitting, Teflon sealing tape, and an oil bottle for maintenance.

Şekil 3: Yan profile of the impact wrench, highlighting its compact design and ergonomic handle.

Figure 4: Close-up of the 1/2-inch square drive, where sockets are attached.

Kurmak

1. Hava Besleme Bağlantısı: Connect the provided connection fitting to the air inlet of the impact wrench. Use the Teflon sealing strip on the threads to ensure an airtight seal.
2. Hose Requirement: For optimal performance, connect the tool to an air compressor using an air hose with a minimum inner diameter of 9mm.
3. Yağlama: Before first use, and regularly thereafter, add a few drops of pneumatic tool oil (not included, use the provided oil burette) into the air inlet. This lubricates the internal components.
4. Soket Eki: Select the appropriate socket (17mm, 19mm, or 21mm) and firmly attach it to the 1/2" square drive.

Kullanım Talimatları

The Einhell TC-PW 610 is designed for efficient loosening and tightening of fasteners, particularly for vehicle wheel nuts.

Figure 5: Demonstrating the use of the impact wrench for tire changing, highlighting its practical application.

Direction and Torque Control:

The tool features an ergonomic left/right rotation switch and multiple torque settings.

Figure 6: The control switch for selecting rotation direction (left/right) and adjusting torque settings.

• Left Rotation (Loosening): The tool has 1 level for left rotation, providing full power for loosening stubborn fasteners.
• Right Rotation (Tightening): The tool offers 3 levels for right-hand rotation, allowing for controlled tightening. Select the appropriate level based on the required torque for the fastener.

Figure 7: Visual representation of the 4-step torque setting capability, allowing precise control over fastening.

Genel İşlem:

1. Ensure the air compressor is set to the correct pressure (max. 8 bar).
2. Select the desired rotation direction and torque setting.
3. Lokmayı bağlantı elemanının üzerine sıkıca yerleştirin.
4. Press the trigger to operate the tool. Release the trigger to stop.
5. For tightening, always finish with a torque wrench to ensure fasteners are tightened to manufacturer specifications.

Figure 8: The impact wrench is primarily for high-torque applications like tire changing. The image also highlights the importance of a 9mm inner diameter air hose for optimal performance.

Bakım

Düzenli bakım, darbeli anahtarınızın uzun ömürlü olmasını ve en iyi performansı göstermesini sağlar.

• Yağlama: Add 2-3 drops of pneumatic tool oil into the air inlet before and after each use, or at least once daily if used frequently. This prevents corrosion and ensures smooth operation of internal components.


Figure 9: The "OIL" icon serves as a reminder for regular lubrication of the pneumatic tool.

• Temizlik: Keep the tool clean and free from dirt and debris. Wipe down the exterior with a damp kumaş. Sert kimyasallar kullanmayın.
• Hava Filtresi: If your air compressor has an inline air filter, ensure it is regularly cleaned or replaced to prevent contaminants from entering the tool.
• Depolamak: Store the impact wrench and its accessories in the provided transport case in a dry, cool place.

Sorun giderme

Yaygın sorunlar ve olası çözümleri için aşağıdaki tabloya bakın.

Özellikler

Figure 10: Key specifications: 8 bar max pressure, 610 Nm high power, and 1/2 inch drive.

Garanti ve Destek

Einhell products are manufactured to high-quality standards and undergo strict quality controls. This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions, including warranty period and claim procedures.

For technical support, spare parts, or service inquiries, please contact Einhell customer service. Contact information can typically be found on the Einhell official websitede veya ürün ambalajında ​​yer almamaktadır.

Einhell Resmi Webalan: www.einhell.com