CLP Sotira Real Leather Office Chair Instruction Manual

giriiş

Thank you for choosing the CLP Sotira Real Leather Office Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new office chair. Please read these instructions carefully before use and retain them for future reference.

Güvenlik Uyarıları

• Maksimum Ağırlık Kapasitesi: The chair is designed to support a maximum weight of 120 kg (approximately 265 lbs). Exceeding this limit may compromise the chair's stability and safety.
• Kararlılık: Always ensure the chair is stable before sitting. Avoid leaning excessively to one side or standing on the chair.
• Çocuklar: Keep children away from the chair during assembly. Do not allow children to play with the chair or its components.
• Hareketli parçalar: Be cautious of moving parts during adjustment to prevent pinching.
• Bakım: Regularly check all screws and connections to ensure they are tight. Loose parts can affect stability and safety.

Kurulum ve Montaj

The CLP Sotira office chair requires some assembly. Please follow these general steps. For detailed visual instructions, refer to the included assembly guide (if provided in the packaging).

1. Bileşenleri Paketinden Çıkarın: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Verify all components are present against the parts list.
2. Tekerlekleri Takın: Insert the casters into the base of the chair. Ensure they are securely clicked into place.
3. Gazlı Asansörün Montajı: Gazlı kaldırma silindirini sandalyenin tabanındaki orta deliğe yerleştirin.
4. Oturma yerini ve sırtlığı birleştirin: Attach the backrest to the seat mechanism using the provided screws. Ensure all screws are tightened securely.
5. Kolçakları takın: Secure the armrests to the seat and backrest assembly using the designated screws.
6. Koltuğu Gazlı Kaldırma Mekanizmasına Bağlayın: Carefully place the assembled seat and backrest onto the gas lift cylinder. The chair should settle into place.
7. Son Kontrol: Before use, ensure all screws are tightened and the chair is stable.

Kullanım Talimatları

Your CLP Sotira office chair is designed for comfort and adjustability. Familiarize yourself with its functions for optimal use.

• Yükseklik Ayarı: To adjust the seat height, pull the lever located under the seat upwards while taking your weight off the chair (to raise) or while seated (to lower). Release the lever at the desired height.
• Eğim İşlevi: The chair features a tilt mechanism. Pull the lever (often the same as the height adjustment lever, or a separate one) outwards to unlock the tilt. Lean back to recline and push the lever inwards to lock the chair in an upright position.
• Eğim Gerginliği: A knob located under the seat (usually at the front) allows you to adjust the tension of the tilt mechanism. Turn it clockwise to increase tension (making it harder to recline) or counter-clockwise to decrease tension (making it easier to recline).
• Tekerlekler: The light casters allow for easy movement across various floor surfaces. Ensure the path is clear before moving the chair.

Bakım

Proper maintenance will extend the life and appearance of your CLP Sotira office chair.

• Cleaning Leather: For general cleaning, wipe the leather surface with a soft, damp cloth. For deeper cleaning, use a specialized leather cleaner according to its instructions. Avoid harsh chemicals, abrasive cleaners, or excessive moisture.
• Toz alma: Regularly dust the chair with a dry, soft cloth to prevent dust buildup.
• Bağlantıları Kontrol Edin: Tüm vidaları ve cıvataları periyodik olarak kontrol ederek sıkı olduklarından emin olun. Stabiliteyi korumak için gerekirse yeniden sıkın.
• Caster Bakımı: Tekerleklerin düzgün bir şekilde hareket etmesini sağlamak için tekerlekleri saç ve döküntülerden uzak tutun.

Sorun giderme

Here are solutions to common issues you might encounter with your office chair:

• Sandalye Gıcırdıyor: Check all bolts and screws and tighten them. A small amount of silicone spray on moving metal parts (avoiding the gas lift cylinder) can also help.
• Sandalye Sallantıları: Ensure all connections are securely tightened. Check if the casters are fully inserted into the base.
• Yükseklik Ayarı Çalışmıyor: Verify that the gas lift lever is fully engaged. If the gas lift cylinder is faulty, it may need replacement.
• Tekerlekler Düzgün Dönmüyor: Tekerleklerin üzerindeki saç, toz veya diğer kalıntıları temizleyin.

Özellikler

Garanti ve Destek

For information regarding warranty coverage or technical support, please refer to the documentation provided with your purchase or contact the retailer where the chair was acquired. Keep your proof of purchase for any warranty claims.