Benchmark 16" Cordless Chainsaw - 60 Volt User Manual

1. Önemli Güvenlik Bilgileri

Bu elektrikli aletle birlikte verilen tüm güvenlik uyarılarını, talimatları, çizimleri ve teknik özellikleri mutlaka okuyun ve anlayın. Aşağıda listelenen tüm talimatlara uyulmaması elektrik çarpmasına, yangına ve/veya ciddi yaralanmaya neden olabilir.

General Chainsaw Safety

• Daima uygun kişisel koruyucu ekipman (KKD) kullanın; bunlar arasında güvenlik gözlükleri, işitme koruyucuları, eldivenler ve sağlam ayakkabılar bulunur.
• Motorlu testere çalışırken vücudunuzun tüm kısımlarını testere zincirinden uzak tutun.
• Do not operate a chainsaw with one hand. Serious injury to the operator, bystanders, or both may result from one-handed operation.
• Always ensure a firm footing and operate the chainsaw only when standing on a fixed, secure, and level surface.
• Geri tepmeye dikkat edin. Geri tepme, kılavuz çubuğunun ucu veya burnu bir cisme temas ettiğinde veya ahşap kapanıp kesim sırasında testere zincirini sıkıştırdığında meydana gelebilir.
• Never allow children or untrained persons to operate the chainsaw.

Pil Güvenliği

• Use only the charger specified by the manufacturer to recharge. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Do not use battery packs or tools that are damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
• Pil takımını veya aleti ateşe veya aşırı sıcaklığa maruz bırakmayın. Ateşe veya 130°C'nin (265°F) üzerindeki sıcaklığa maruz bırakılması patlamaya neden olabilir.
• Follow all charging instructions and do not charge the battery pack or tool outside of the temperature range specified in the instructions.

2. Paket İçeriği

Paketi açtığınızda tüm ürünlerin mevcut ve iyi durumda olduğundan emin olun:

• Benchmark 16" Cordless Chainsaw Unit
• 16" Oregon Cutting Bar
• Oregon Saw Chain
• 60V Li-ion 2.5Ah Battery Pack (with SAMSUNG 21700 cell technology)
• Pil Şarj Cihazı
• Kullanıcı Kılavuzu

3. Ürün Bittiview

Familiarize yourself with the main components of your Benchmark 16" Cordless Chainsaw.

Şekil 3.1: Genel view of the Benchmark 16" Cordless Chainsaw, highlighting its ergonomic design and 16-inch bar.

Şekil 3.2: Üst view of the chainsaw, showing the battery compartment area and controls.

Key components include the motor housing, front handle, rear handle, chain brake, guide bar, saw chain, oil reservoir cap, and battery compartment.

4. Kurulum

4.1 Pil Şarjı

Before first use, fully charge the 60V Li-ion battery pack. Connect the charger to a standard power outlet and insert the battery pack into the charger. The indicator light on the charger will show the charging status. Once fully charged, remove the battery from the charger.

4.2 Pala ve Zincir Montajı

This chainsaw features tool-less chain tensioning for easy setup.

1. Ensure the battery pack is removed from the chainsaw.
2. Place the saw chain around the sprocket and guide bar. Ensure the cutting edges of the chain are facing the correct direction (refer to the arrow on the guide bar).
3. Align the guide bar over the mounting studs on the chainsaw body.
4. Engage the chain with the drive sprocket.
5. Secure the side cover and use the tool-less tensioning knob to adjust chain tension.

Şekil 4.1: Yakın çekim view of the 16-inch Oregon cutting bar and chain, illustrating the chain's position on the bar.

4.3 Zincir Gergisi

Proper chain tension is crucial for safe and efficient operation. The chain should be snug against the guide bar, but still able to be pulled freely by hand. Adjust the tool-less tensioning knob until the chain is correctly tensioned. A new chain may stretch during initial use, requiring re-tensioning after the first few cuts.

4.4 Yağlama

This chainsaw features automatic lubrication. Before each use, check the oil reservoir level. Fill with appropriate bar and chain oil if necessary. Do not operate the chainsaw without sufficient lubrication, as this can cause damage to the bar and chain.

5. Kullanım Talimatları

5.1 Motorlu Testerenin Çalıştırılması

1. Ensure the battery pack is fully charged and securely inserted into the battery compartment.
2. Motorlu testereyi sağlam ve düz bir yüzeye yerleştirin.
3. Engage the chain brake by pushing the front hand guard forward until it clicks into place.
4. To start, disengage the chain brake by pulling the front hand guard back towards the handle.
5. Emniyet kilidi açma düğmesine (varsa) basın ve ardından motoru çalıştırmak için tetik düğmesine basın.

5.2 Kesme Teknikleri

Always maintain a firm grip with both hands on the chainsaw handles. Keep your body balanced and avoid overreaching.

• Felling Cuts: For felling small trees, make a directional notch first, then a felling cut from the opposite side, slightly above the notch.
• Dallanma: Devrilmiş bir ağaçtan dalları kesin. Ağacın tabanından tepesine doğru, önce küçük dalları keserek çalışın. Gerilim altındaki dallara dikkat edin.
• Bucking: Cutting a felled tree into logs. Support the log to prevent pinching the chain. Cut from the top down if the log is supported at both ends, or from the bottom up (undercut) if supported at one end.

5.3 Motorlu Testerenin Durdurulması

Release the trigger switch to stop the motor. For immediate chain stoppage, push the front hand guard forward to engage the chain brake.

6. Bakım

Düzenli bakım, motorlu testerenizin uzun ömürlü ve güvenli çalışmasını sağlar.

6.1 Temizlik

After each use, remove the battery pack and clean the chainsaw. Use a brush or compressed air to remove sawdust, chips, and debris from the motor housing, chain brake mechanism, and cooling vents. Wipe down the exterior with a damp Kumaş.

6.2 Zincir Bileme

A sharp chain is essential for efficient and safe cutting. Sharpen the chain regularly using a round file of the correct diameter (refer to chain manufacturer specifications) or have it professionally sharpened. Ensure all cutters are sharpened to the same length and angle.

6.3 Kılavuz Çubuğu Bakımı

Periodically remove the guide bar and clean the groove to remove accumulated sawdust and debris. Check the guide bar for wear, burrs, or damage. Flip the guide bar periodically to ensure even wear.

6.4 Depolama

When not in use, store the chainsaw in a dry, secure location, out of reach of children. Ensure the battery pack is removed and stored separately in a cool, dry place. Engage the chain brake and use a guide bar cover to protect the chain.

7. Sorun Giderme

Bu bölümde motorlu testerenizde karşılaşabileceğiniz yaygın sorunlar ele alınmaktadır.

8. Özellikler

9. Garanti ve Destek

Warranty information for the Benchmark 16" Cordless Chainsaw is not available in the provided product data. Please refer to the product packaging or contact Benchmark customer service for details regarding warranty coverage and support.