1. Ürün Bittiview
GünlükTag UHADO-16 is a versatile, multi-use USB PDF temperature and humidity data logger. It features a built-in display that shows the most recent readings and can generate comprehensive reports (PDF, CSV, LTD) without requiring proprietary software or hardware at the destination. Users can also review minimum and maximum recorded trip values directly on the display without needing a PC.
Şekil 1: GünlükTag UHADO-16 Multi-use Data Logger
2. Temel Özellikler
- Records and displays Temperature & Humidity readings simultaneously.
- Stores up to 16,000 sets of recordings, sufficient for extended monitoring periods.
- Real-time clock provides accurate date/time stamps for every recording.
- Equipped with a USB micro-port for direct connection to a computer.
- Automatically generates PDF, CSV, and LTD reports without requiring specialized software.
- Supports fast data download using the standard LogTag Interface cradle (sold separately).
- User-configurable settings for alarm thresholds, logging intervals, and trip duration.
- Allows for in-transit inspections to be recorded with a simple button press.
- Features a user-replaceable coin cell battery.
Figure 2: Key features of the UHADO-16 Data Logger
3. Kutuda Neler Var?
- 1 x LogTag UHADO-16 Temp/RH logger with display and USB
4. Kurulum
Before initial use, it is recommended to configure the UHADO-16 data logger using the LogTag Analyzer software. This software allows you to set parameters such as logging interval, alarm thresholds, and start/stop conditions. The logger connects to your computer via its integrated USB micro-port or an optional LogTag Interface cradle for faster downloads.
Şekil 3: GünlükTag UHADO-16 connected via an Interface Cradle (sold separately)
5. Kullanım Talimatları
The UHADO-16 data logger is designed for straightforward operation. Below are instructions for starting, stopping, and reviewing data directly on the device.
5.1. Starting the Logger
To begin logging, press and hold the BAŞLANGIÇ/İŞARET ekran görünene kadar düğmesine KAYIT+ or KAYIT. If the logger is pre-configured for a delayed start, it will show dts (date/time start) or St (start delay) before logging begins. If configured for a push-button start, HAZIR will display until the button is pressed.
5.2. Yenidenviewing Data During Logging
During active logging, the display will show the current temperature and humidity. You can review the minimum and maximum recorded values by briefly pressing the STOP/REVIEW button. Each press will cycle through the current reading, maximum temperature (MAKSİMUM), and minimum temperature (DAKİKA). A checkmark indicates no alarm excursions, while an arrow or cross symbol indicates an alarm threshold has been triggered or an alarm event occurred.
5.3. Stopping the Logger
If the logger is configured for manual stopping, press and hold the STOP/REVIEW düğmeye kadar DURDURULDU appears on the display. Logging will cease, and the recording indicator will disappear. After stopping, a checkmark or cross symbol will indicate if any alarm events occurred during the entire logging period.
5.4. Marking an Event
During logging, a brief press of the BAŞLANGIÇ/İŞARET button will place an inspection mark in the data. The İŞARET symbol will appear on the display and remain until the next reading is taken. This mark will be visible in the downloaded data, indicating a specific event or inspection point.
5.5. Eğitim Videosu
For a visual guide on operating the UHADO-16, please watch the official instructional video below:
Video 1: Instructions for UHADO-16 Data Logger
This video provides a detailed walkthrough of the UHADO-16's display indicators and button functionalities, including how to start logging, review minimum/maximum temperatures, and stop the device.
6. Bakım
6.1. Pil Değişimi
The UHADO-16 uses a user-replaceable CR2032 coin cell battery. When the battery indicator on the display shows low power, replace the battery promptly to ensure continuous and accurate logging. Refer to the detailed instructions provided with the device for safe battery replacement procedures.
7. Sorun Giderme
If you encounter any issues with your LogTag UHADO-16, consider the following:
- Cihaz Yanıt Vermiyor: Check the battery level. If low, replace the CR2032 battery.
- Veri Aktarım Sorunları: Ensure the logger is correctly inserted into the USB port or interface cradle. Verify that the LogTag Analyzer software is installed and running.
- Yanlış Okumalar: Ensure the logger is placed in an environment where air can circulate freely around it and is not exposed to direct heat sources or extreme conditions beyond its specified operating range.
- Display Blank: This typically indicates a depleted battery. Replace the battery.
For further assistance, refer to the comprehensive troubleshooting guide available on the LogTag website or contact LogTag Destek.
8. Özellikler
| Bağlanmak | Değer |
|---|---|
| Ürün Model Numarası | UHADO-16 |
| Paket Boyutları | 5.55 x 3.98 x 1.54 inç |
| Ürün Ağırlığı | 2.08 ons |
| Piller | 1 CR2032 pil gereklidir (dahil) |
| Pil Açıklaması | Lityum |
| Renk | Beyaz/Mavi |
| Montaj Tipi | Masaüstü |
| Üst Sıcaklık Derecesi | 158 Derece Fahrenheit |
| Üretici | KayıtTag Kuzey Amerika, Inc. |
9. Garanti ve Destek
Specific warranty details for the LogTag UHADO-16 are typically provided at the point of purchase or within the product packaging. For detailed warranty information, please refer to your purchase documentation or visit the official LogTag webalan.
KayıtTag offers comprehensive support through its global distributor network, reaching over 100 countries worldwide. For technical assistance, product inquiries, or to find a local distributor, please visit the KayıtTag Amazon'da mağaza or the main LogTag webalan.
