1. Giriş
Thank you for choosing the MOUNTUP Ultrawide Single Monitor Arm, Model MU7007. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor arm. Please read this manual thoroughly before installation and keep it for future reference.
2. Güvenlik Bilgileri
Kurulum ve kullanım sırasında lütfen aşağıdaki güvenlik önlemlerine uyun:
- 33 lbs (15 kg) maksimum ağırlık kapasitesini aşmayın.
- Ensure your monitor's VESA pattern is compatible (75x75mm or 100x100mm).
- Verify that your desk surface is strong enough to support the combined weight of the monitor arm and your monitor.
- Always use the provided hardware and follow installation steps carefully.
- Montaj sırasında çocukları ve evcil hayvanları uzak tutun.
- Adjust the gas spring tension only when the arm is in a horizontal position to prevent sudden movement.
3. Paket İçeriği
Lütfen tüm parçaların eksiksiz ve hasarsız olduğundan emin olun:
- Monitör Kolu Tertibatı
- Çıkarılabilir VESA Plakası
- C-CIamp Temel
- Grommet Base (Optional)
- Mounting Hardware Kit (screws, washers, spacers)
- Allen Anahtarları
- Kullanım Kılavuzu
Image: All components of the MOUNTUP Ultrawide Single Monitor Arm, showing the main arm, the C-clamp mounting option, and the grommet mounting option.
4. Özellikler
| Özellik | Şartname |
|---|---|
| Model Numarası | MU7007 |
| Ekran Boyutu Uyumluluğu | 22 - 40 inç |
| Ağırlık Kapasitesi | 6.6 - 33 lbs (3 - 15 kg) |
| VESA Uyumluluğu | 75x75mm, 100x100mm |
| Montaj Seçenekleri | C-CIamp, Grommet |
| Eğim Aralığı | +90° / -45° |
| Dönme Aralığı | 180° (at arm joints), 360° (at VESA plate) |
| Rotasyon | 360° (Dikeyden Yataya) |
| Maksimum Uzatma | 22.5 inç (57.15 cm) |
| Maksimum Yükseklik Ayarı | 19.75 inç (50.16 cm) |
| Malzeme | Alaşımlı Çelik |
| Renk | Siyah |
| USB Bağlantı Noktaları | 2 (integrated into base, USB cable not included) |
Image: The monitor arm supporting an ultrawide screen, highlighting its compatibility with screens up to 40 inches and a weight capacity of 30.9 lbs.
5. Kurulum ve Kurulum
The MOUNTUP monitor arm offers two installation methods: C-Clamp and Grommet Mount.
5.1. Choose Your Mounting Method
Determine which mounting method is suitable for your desk. The C-clamp is drill-free, while the grommet mount requires a hole in your desk.
5.2. C-Clamp Kurulum
- C-cl'yi takınamp to the bottom of the main pole.
- Place the monitor arm assembly onto your desk edge.
- C-cl'yi sıkınamp screw until the arm is securely fastened to the desk.
5.3. Grommet Mount Installation (Optional)
- If your desk has a grommet hole, or you plan to drill one, attach the grommet base plate to the bottom of the main pole.
- Direği grommet deliğinden geçirin.
- Secure the base from underneath the desk using the provided hardware.
5.4. Monitörün Takılması
- Attach the detachable VESA plate to the back of your monitor using the appropriate VESA screws and spacers from the hardware kit. Ensure the screws are tightened securely.
- Slide the monitor (with the attached VESA plate) onto the arm's VESA head until it clicks into place.
- Tighten the security screw on the VESA head to prevent accidental detachment.
Image: A woman demonstrating the easy installation process, attaching a monitor to the arm using the detachable VESA plate, indicating setup can be completed within 15 minutes.
6. Çalıştırma ve Ayarlamalar
The MOUNTUP monitor arm offers extensive adjustability for optimal ergonomic positioning.
6.1. Gazlı Yay Gerginlik Ayarı
The gas spring tension needs to be adjusted to match your monitor's weight. If the monitor rises too easily or drops, adjust the tension:
- Monitor raises up: Turn the adjustment screw (located on the arm joint) clockwise (towards the "-" direction) to reduce tension for lighter monitors.
- Monitor drops down: Turn the adjustment screw counter-clockwise (towards the "+" direction) to increase tension for heavier monitors.
- Önemli: Hold the arm in a horizontal position during adjustment to prevent sudden movement.
6.2. Yükseklik Ayarı
Once the gas spring tension is correctly set, you can freely move the monitor up and down to your desired height. The arm allows for a height adjustment range of 13 inches, with a minimum height of 6.7 inches and a maximum height of 19.7 inches from the desk surface.
6.3. Tilt Angle Adjustment
To adjust the monitor's tilt angle:
- Loosen the tilting bolt (turn towards the "-" direction) on the VESA head.
- Adjust the monitor to your desired tilt angle (+90° to -45°).
- Retighten the tilting bolt (turn towards the "+" direction) to secure the angle.
6.4. Döndürme ve Çevirme
- Döner: The arm joints allow for 180° swivel, and the VESA plate can swivel 360°, providing flexibility to share your screen or adjust viewaçıları.
- Rotasyon: The VESA plate supports 360° rotation, allowing you to switch your monitor between landscape and portrait orientations.
Image: Detailed instructions for adjusting the gas spring tension and the monitor's tilt angle using an Allen wrench.
Image: Visual representation of the monitor arm's full range of motion, including tilt (+90°/-45°), 360° swivel at arm joints, and 360° rotation for portrait/landscape viewIng.
Image: A diagram illustrating the free height adjustment capabilities, showing minimum height (6.7"), maximum height (19.7"), and maximum extension (22.6").
6.5. Kablo Yönetimi
The monitor arm features integrated cable management to keep your workspace tidy. Route your cables through the removable covers on the arm and the base. The base also includes two USB connectors for convenient access (USB cable not included).
Image: A visual guide demonstrating the routing of cables through the detachable USB connector integrated into the monitor arm's base, promoting a clutter-free desk.
7. Bakım
Düzenli bakım, monitör kolunuzun uzun ömürlü olmasını ve en iyi performansı göstermesini sağlar:
- Temizlik: Kol ve tabanı yumuşak bir bezle silin.amp bez. Aşındırıcı temizleyicilerden kaçının.
- Bağlantıları Kontrol Edin: Periodically check all screws and bolts to ensure they are tight and secure. Retighten if necessary.
- Gazlı Yay: The gas spring is designed for long-term use (over 20,000 cycles) and generally requires no specific maintenance beyond initial tension adjustment.
8. Sorun Giderme
If you encounter issues with your MOUNTUP monitor arm, refer to the following common problems and solutions:
8.1. Monitor Sags or Does Not Hold Position
- Neden: Gaz yayının gerilimi monitörün ağırlığı için çok düşük.
- Çözüm: Increase the gas spring tension by turning the adjustment screw counter-clockwise (towards the "+" direction) as described in Section 6.1.
8.2. Monitor Floats Up or is Difficult to Push Down
- Neden: Gaz yayının gerilimi monitörün ağırlığı için çok yüksek.
- Çözüm: Decrease the gas spring tension by turning the adjustment screw clockwise (towards the "-" direction) as described in Section 6.1.
8.3. Monitor Tilts Forward or Backward Unexpectedly
- Neden: The tilt angle bolt on the VESA head is loose.
- Çözüm: Retighten the tilt angle bolt as described in Section 6.3.
8.4. Arm Feels Loose or Unstable
- Neden: masa clamp or grommet mount is not sufficiently tightened.
- Çözüm: Recheck and tighten the C-clamp or grommet mounting hardware securely.
9. Garanti ve Destek
MOUNTUP stands behind the quality and durability of its products. This monitor arm comes with a 3-year support period, ensuring its strength and reliability.
For further assistance, technical support, or warranty claims, please contact MOUNTUP customer service through the retailer where you purchased the product or visit the official MOUNTUP webiletişim bilgileri için site.
