Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W) Instruction Manual

1. Giriş ve Üzeriview

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Stelpro Ultra-Quiet Wall Convector Heater, Model ASHC2002W. Please read all instructions carefully before use and retain this manual for future reference.

The Stelpro ASHC2002W is an economical wall-mounted convector heater designed to provide dependable, quiet convection heating for spaces up to 200 square feet. It features a slim design, a built-in electronic thermostat, and a durable finish, making it suitable for various indoor environments.

Image 1.1: Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)

2. Güvenlik Bilgileri

WARNING: This heater is hardwired only and is NOT a plug-in unit. Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.

• Bu ısıtıcıyı kurmadan veya kullanmadan önce tüm talimatları okuyun.
• Kurulum veya bakım işlemlerinden önce güç kaynağının ana devre kesiciden bağlantısının kesildiğinden emin olun.
• Do not install the heater closer than 3 feet (0.9 m) from the front of the heater and away from the side and rear of any combustible materials (e.g., curtains, draperies, furniture).
• Do not install the heater in areas where gasoline, paint, or other flammable liquids are stored.
• Bu ısıtıcı sadece iç mekanda kullanım için tasarlanmıştır.
• Keep the top air discharge grille clear of obstructions to ensure proper airflow.

3. Paket İçeriği

Paketi açtığınızda tüm bileşenlerin mevcut ve hasarsız olduğundan emin olun:

• Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)
• Concealed Mounting Bracket
• Back Entry Plate with Cable Clamps
• Kurulum Donanımı (vidalar, dübeller)
• Kullanım Kılavuzu

4. Özellikler

Resim 4.1: Ürün Boyutları

5. Kurulum

IMPORTANT: This heater requires a 240V (or 208V) hardwired connection. It is not a plug-in unit. All wiring must be done by a qualified electrician.

Image 5.1: Hardwired Connection Requirement

5.1 Isıtıcı Montajı

1. Choose a suitable wall location, ensuring at least 3 feet (0.9 m) clearance from any combustible materials in front, and adequate clearance from sides and rear.
2. Use the provided mounting bracket and hardware. The heater is designed for surface-mount installation.
3. Mark the drilling points on the wall using the concealed bracket as a template.
4. Drill pilot holes and insert the appropriate wall anchors (if needed for drywall).
5. Montaj braketini verilen vidaları kullanarak duvara sabitleyin.
6. Ensure the bracket is level and securely fastened to support the heater's weight.

Image 5.2: Concealed Mounting Bracket

5.2 Elektrik Kablolama

1. Ensure power is OFF at the main circuit breaker.
2. Route the 240V (or 208V) electrical supply wires to the heater's back entry plate.
3. Connect the supply wires to the heater's terminals using the cable clamps, following the wiring diagram in the full owner's manual.
4. Tüm bağlantıları sıkıca kapatın ve hiçbir açıkta tel kalmadığından emin olun.
5. Carefully attach the heater to the mounted bracket, ensuring it locks into place.
6. Ana devre kesiciden elektriği geri verin.

6. Kullanım Talimatları

Your Stelpro convector heater features a built-in electronic thermostat for precise temperature control.

Image 6.1: Built-in Electronic Thermostat

6.1 Sıcaklığın Ayarlanması

• Use the up/down arrows on the thermostat's LCD screen to adjust the desired room temperature.
• Isıtıcı, ayarlanan sıcaklığı otomatik olarak koruyacaktır.

6.2 Çalışma Modları

• Otomatik Mod: This mode can be programmed to automatically lower the temperature at night, contributing to energy savings. Refer to the full owner's manual for programming details.
• Güvenlik Modu: This feature allows you to lock the maximum setpoint temperature for safety, preventing accidental or unauthorized adjustments to higher temperatures.

7. Bakım

Düzenli bakım, ısıtıcınızın optimum performans göstermesini ve uzun ömürlü olmasını sağlar.

• Temizlik: Ensure the heater is turned off and cool before cleaning. Use a soft, damp Dış yüzeyi silmek için bir bez kullanın. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
• Air Grilles: Periodically check the air intake (bottom) and discharge (front) grilles for dust or debris accumulation. Gently vacuum or brush away any blockages to maintain efficient airflow.
• Yıllık inceleme: It is recommended to have a qualified electrician inspect the heater and its wiring connections annually.

8. Sorun Giderme

If your heater is not operating correctly, consult the following common issues before contacting support:

• Isıtıcı açılmıyor: Check the main circuit breaker to ensure power is supplied. Verify that the heater is securely mounted to the wall, as it contains a safety switch that prevents operation if not properly installed.
• Yetersiz Isı: Ensure the thermostat is set to a temperature higher than the current room temperature. Check for any obstructions around the air grilles. Verify the heater's wattage matches the room size (up to 200 sq ft for 2000W/240V).
• Alışılmadık Sesler: While designed for quiet operation, minor expansion/contraction noises may occur during heating/cooling cycles. If loud or persistent noises occur, disconnect power and contact support.
• Thermostat Display Issues: If the LCD display is blank or erratic, try resetting the circuit breaker for a few minutes.

For persistent issues or complex problems, please refer to the warranty and support section.

9. Garanti ve Destek

Your Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W) is backed by the following warranties:

• 5 Yıllık Sınırlı Garanti on the overall unit.
• Ömür Boyu Garanti ısıtma elemanı üzerinde.
• 3 Yıllık Garanti on electronic components.

For technical support, warranty claims, or further assistance, please contact Stelpro customer service. Refer to the contact information provided in your owner's manual or visit the official Stelpro webalan.