1. Giriş
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your TecTake 801046 Faux Leather Office Chair. Please read this manual thoroughly before assembly and use to ensure proper function and safety.
The TecTake 801046 office chair is designed for comfort and durability, featuring extra thick padding, an ergonomic design, and adjustable height for an optimal seating experience.
2. Güvenlik Bilgileri
Önemli Güvenlik Talimatları:
- Sandalyeyi her zaman verilen talimatlara göre monte edin.
- Do not exceed the maximum weight recommendation of 120 kg (approximately 264 lbs).
- Exercise caution when adjusting the chair's height to prevent injury.
- Kullanmadan önce tüm vidaların ve cıvataların iyice sıkıldığından emin olun ve gevşeklik olup olmadığını periyodik olarak kontrol edin.
- Toplantı sırasında çocukları sandalyeden uzak tutun.
3. Paket İçeriği
Montaja başlamadan önce tüm parçaların mevcut olduğundan emin olun. Herhangi bir parça eksik veya hasarlıysa, müşteri desteğiyle iletişime geçin.
- 1 x Office Chair (includes seat, backrest, armrests, base, wheels, gas lift)
- Montaj Donanımı (vidalar, rondelalar, Allen anahtarı)
- Kullanım Kılavuzu

Image: An illustration or photograph showing the various components of the TecTake 801046 Faux Leather Office Chair laid out, including the seat, backrest, armrests, five-star base, wheels, and gas lift cylinder.
4. Montaj Talimatları
Follow these steps carefully to assemble your office chair. It is recommended to assemble the chair on a soft, clean surface to prevent damage.
- Tekerlekleri tabana takın: Insert the five wheels into the holes at the end of each leg of the five-star base until they click securely into place.
- Gazlı Asansörü Takın: Place the gas lift cylinder into the central hole of the five-star base. Ensure it is seated firmly.
- Kolçakları Koltuğa Takın: Secure the armrests to the underside of the seat cushion using the provided screws. Do not overtighten initially.
- Sırtlığı Koltuğa Takın: Connect the backrest to the seat assembly, typically by aligning the metal plate on the backrest with the mechanism on the seat and securing with screws.
- Koltuk Mekanizmasını Takın: Fasten the seat mechanism (which includes the height adjustment lever and tilt control) to the underside of the seat cushion. Ensure the front of the mechanism faces the front of the seat.
- Koltuğu Gazlı Kaldırma Mekanizmasına Bağlayın: Carefully place the assembled seat onto the gas lift cylinder, ensuring the central hole of the seat mechanism aligns with the top of the gas lift. Apply gentle downward pressure to secure.
- Son Sıkma: Once all components are in place, securely tighten all screws.
5. Operasyon
Your TecTake 801046 office chair offers several adjustable features for personalized comfort.
- Yükseklik Ayarı: Oturma yüksekliğini artırmak için, ağırlığınızı sandalyeden kaldırırken oturma yerinin sağ tarafının altında bulunan kolu kaldırın. Oturma yüksekliğini düşürmek için, otururken kolu kaldırın. İstediğiniz yüksekliğe ulaştığınızda kolu bırakın.
- Eğim İşlevi: The chair features a tilt mechanism. Pull the lever outwards to enable tilting, and push it inwards to lock the chair in an upright position.
- Döner: The chair is designed to swivel 360 degrees for ease of movement.
- Hareketlilik: The five-star base with wheels allows for easy movement across various floor surfaces.
6. Bakım
Doğru bakım ofis koltuğunuzun ömrünü ve görünümünü uzatacaktır.
- Temizlik: The faux leather material should be dry cleaned. For minor spills, gently wipe with a damp Bez ve yumuşak bir sabunla silin, ardından hemen kurulayın. Sert kimyasallardan veya aşındırıcı temizleyicilerden kaçının.
- Denetleme: Tüm vidaların ve cıvataların sıkı kaldığından emin olmak için periyodik olarak kontrol edin. Gerektiğinde yeniden sıkın.
- Sandalyeyi Taşımak: Sandalyeyi hareket ettirirken, tabanına veya zemine zarar vermemek için sürüklemek yerine kaldırın.
7. Sorun Giderme
If you encounter issues with your chair, refer to these common solutions:
- Sandalye Çöküyor veya Yüksekliği Ayarlanmıyor: Yükseklik ayar kolunun tamamen yerine oturduğundan emin olun. Sorun devam ederse, gazlı kaldırma mekanizmasının değiştirilmesi gerekebilir. Müşteri desteğiyle iletişime geçin.
- Sandalye Sallantıları: Check that all assembly screws are securely tightened, especially those connecting the armrests and mechanism to the seat. Ensure the gas lift is properly seated in the base.
- Tekerlekler Düzgün Dönmüyor: Check for debris (hair, dust) caught in the wheels. Clean them if necessary. Ensure the chair is on an appropriate surface (carpet or hard floor).
- Gıcırtı Sesleri: Apply a small amount of silicone lubricant to moving parts, such as the tilt mechanism or wheel axles, if squeaking occurs.
8. Özellikler
| Özellik | Detay |
|---|---|
| Marka | tektek |
| Model Numarası | 404390 |
| Malzeme | Faux Leather (Upholstery), Foam (Fill) |
| Renk | Beyaz |
| Oturma Yüksekliği | 42 - 50 cm (16.5 - 19.7 inç) |
| Koltuk Boyutları (G x D) | 52 x 49 cm (20.5 x 19.3 inç) |
| Sırtlık Boyutları (G x Y) | 52 x 75 cm (20.5 x 29.5 inç) |
| Maksimum Ağırlık Önerisi | 120 kg (264 lbs) |
| Ürün Boyutları | 20.47 x 19.29 x 19.69 inç (U x G x Y) |
| Ürün Ağırlığı | 16 kg (35.2 lbs) |
| Özel Özellikler | Arm Rest, Ergonomic, Headrest, With wheels, Tilting |
| Ürün Bakım Talimatları | Kuru Temizleme |
9. Garanti ve Destek
For warranty information or technical support, please refer to the purchase documentation or contact TecTake customer service directly. Keep your proof of purchase for any warranty claims.
For further assistance, visit the official TecTake websiteyi ziyaret edin veya destek kanallarıyla iletişime geçin.





