VONROC 1500W 216mm Electric Sliding Miter Saw Instruction Manual

1. Güvenlik Talimatları

Always observe basic safety precautions when using this electric sliding miter saw to reduce the risk of fire, electric shock, and serious personal injury. Read all instructions carefully before operation.

Genel Elektrikli Alet Güvenliği

• Çalışma Alanı Güvenliği: Çalışma alanınızı temiz ve iyi aydınlatılmış tutun. Dağınık veya karanlık alanlar kazalara davetiye çıkarır. Elektrikli aletleri yanıcı sıvılar, gazlar veya toz gibi patlayıcı ortamlarda çalıştırmayın.
• Elektriksel Güvenlik: Elektrikli aletlerin fişleri prize uygun olmalıdır. Fişte hiçbir şekilde değişiklik yapmayın. Borular, radyatörler, ocaklar ve buzdolapları gibi topraklanmış yüzeylerle vücut temasından kaçının.
• Kişisel Güvenlik: Always wear eye protection (safety goggles) and hearing protection. Use a dust mask if operations create dust. Dress properly; avoid loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.

Miter Saw Specific Safety

• Bıçak Güvenliği: Ensure the blade is sharp and correctly installed. Never attempt to cut freehand. Always use the material clamp and fence to secure the workpiece.
• Lazer Kılavuzu: Do not stare directly into the laser beam. The laser is a Class 2 laser product.
• Toz Toplama: Connect a dust extraction device or use the provided dust bag to minimize dust exposure.
• Başlatmak: The saw features a soft start system. Allow the blade to reach full speed before beginning a cut.

2. Ürün Bittiview

The VONROC 1500W 216mm Electric Sliding Miter Saw is designed for precise cutting of wood, laminate, and similar materials. It features a powerful motor, a sliding function for wider cuts, and a laser guide for accuracy.

Ana Bileşenler

• Saw Head with Motor and Blade
• Kayar Raylar
• Base Plate / Turntable
• Miter Scale and Lock Handle
• Bevel Adjustment and Lock
• İş parçası Clamp
• Acılır Kapanır Masa
• Dust Port and Dust Bag
• Lazer Kılavuzu

Şekil 1: Tam view of the VONROC 1500W 216mm Electric Sliding Miter Saw.

3. Kurulum

Paket Açma ve Montaj

1. Tüm bileşenleri dikkatlice ambalajından çıkarın.
2. Inspect the saw for any damage that may have occurred during transit. Do not operate if damaged.
3. Attach the dust bag to the dust port at the rear of the saw head.
4. Install the extension tables on both sides of the base plate, securing them with the provided fasteners.

Testerenin Montajı

For stable operation, it is recommended to mount the miter saw to a workbench or a dedicated miter saw stand. Use the mounting holes in the base of the saw and appropriate hardware (not included) to secure it firmly.

Çitin Ayarlanması

The fence provides support for the workpiece. Ensure it is properly aligned and secured before making any cuts. The fence can be adjusted for different cutting angles and material thicknesses.

Figure 2: The sliding mechanism and adjustable fence provide support and allow for wider cuts.

Laser Guide Alignment

The laser guide projects a line onto the workpiece, indicating the cutting path. To activate, press the laser button. If the laser line is not aligned with the blade's kerf, consult the troubleshooting section for adjustment instructions.

Figure 3: The integrated laser guide assists in precise cutting by projecting a visible line.

4. Operasyon

Temel Kesme İşlemleri

1. İş Parçasını Güvenli Hale Getirin: Place the workpiece firmly against the fence and base. Use the material clamp to hold it securely.
2. Açı Ayarı: Adjust the miter angle by loosening the lock handle, rotating the turntable to the desired angle (e.g., 0°, 15°, 22.5°, 30°, 45°), and then tightening the lock handle.
3. Set Bevel: For bevel cuts, loosen the bevel lock, tilt the saw head to the desired angle (e.g., 0° to 45°), and tighten the lock.
4. Testereyi Çalıştır: Press the trigger switch. Allow the blade to reach full speed before lowering it into the workpiece.
5. Kesim Yap: Slowly lower the saw head through the workpiece. For sliding cuts, pull the saw head towards you, lower it, and push it smoothly through the material.
6. Release Saw: Kesim tamamlandıktan sonra tetiği bırakın ve testere başlığını kaldırmadan önce bıçağın tamamen durmasını bekleyin.

Figure 4: The turntable allows for precise miter angle adjustments from -45° to +45°.

Figure 5: The saw head can be tilted for accurate bevel cuts up to 45°.

Kayan Fonksiyon

The sliding function allows for cutting wider workpieces than a standard miter saw. To use, unlock the sliding mechanism (if applicable), pull the saw head forward, lower the blade into the material, and push the saw head smoothly back through the workpiece. Ensure the workpiece is fully supported throughout the cut.

5. Bakım

Regular maintenance ensures the longevity and safe operation of your miter saw. Always disconnect the saw from the power supply before performing any maintenance.

Bıçak Değiştirme

1. Gücü kesin.
2. Bıçak koruyucusunu kaldırın.
3. Verilen anahtarı kullanarak mil kilitleme düğmesini basılı tutarken mil somununu gevşetin.
4. Eski bıçağı dikkatlice çıkarın ve dişlerin doğru yönde olduğundan emin olarak yeni bıçağı takın.
5. Mil somununu iyice sıkın.

Temizlik

• Regularly empty the dust bag or vacuum the dust port.
• Clean the saw's exterior with a damp kumaş. Sert kimyasallar kullanmayın.
• Keep the sliding rails clean and free of debris for smooth operation.

Yağlama

Apply a thin layer of light machine oil to the sliding rails periodically to ensure smooth movement of the saw head.

6. Sorun Giderme

7. Özellikler

8. Garanti ve Destek

VONROC products are manufactured to high-quality standards. For warranty information, please refer to the documentation included with your purchase or visit the official VONROC website. For technical support, spare parts, or service inquiries, please contact VONROC customer service through their official channels.

Herhangi bir garanti talebiniz için lütfen satın alma belgenizi saklayın.