giriiş
The TC Electronic Infinite Sample Sustainer is a versatile guitar effects pedal designed to sample and sustain your guitar signal, creating rich, ambient pads for you to play over. It features optional layering, an infinite mode for continuous morphing layers, and integrated reverb and modulation effects. The footswitch can be configured for either latching or momentary operation, providing flexible control over your sound.
Ürün Bittiview
Şekil 1: Ön Panel Kontrolleri. Bu görüntü yukarıdan aşağıya doğru bir görünümü sergiliyor. view of the Infinite Sample Sustainer pedal, highlighting the Decay, Level, Fade In, and FX Type knobs, along with the Dry/Verb switch, Latch/Momentary switch, and the main footswitch. Input and output jacks are visible on the sides.
Şekil 2: Açısal View. An angled perspective of the pedal, showcasing its compact blue casing and the arrangement of its control knobs and jacks.
Şekil 3: Arka Panel Bağlantıları. This image shows the rear of the pedal, featuring the DC power input and the USB port for connectivity and firmware updates.
Figure 4: Regulatory Information. The bottom label of the pedal, displaying compliance markings, power requirements (9V === 100mA), and manufacturing details.
Kurmak
Güç Bağlantısı
The Infinite Sample Sustainer pedal requires a 9V DC power supply with a center-negative polarity. Ensure the power supply provides at least 100mA. Connect the power supply to the DC input jack located on the rear of the pedal.
Ses Bağlantıları
- Gitarınızı veya diğer müzik aletinizi şuraya bağlayın: IN Pedalların sağ tarafındaki jakı, standart 1/4 inçlik bir enstrüman kablosu kullanarak bağlayın.
- Bağlan DIŞARI Pedalın sol tarafındaki jakı sizin amplifier or the next pedal in your signal chain using another 1/4" instrument cable.
- For advanced routing, utilize the GÖNDERMEK Ve GERİ DÖNMEK jacks to integrate external effects into the pedal's internal FX loop. This allows you to apply other effects specifically to the sustained signal.
USB Bağlantısı
The USB port on the rear of the pedal is used for connecting to a computer for firmware updates and TonePrint editing. Use a standard USB cable to connect the pedal to your computer.
Pedalın Çalıştırılması
Kontroller Üzerindeview
- ÇÜRÜME Düğmesi: Controls how quickly the sustained sound fades out. Turn clockwise for longer sustain.
- SEVİYE Düğmesi: Adjusts the overall output volume of the sustained signal.
- Yavaşça Giriş Düğmesi: Determines the speed at which the sustained sound fades in after the footswitch is engaged.
- FX TYPE Knob: Selects between different effect types (L1, L2, L3, Infinite, TP1, TP2, TP3).
- L1, L2, L3: Layering modes, allowing you to stack multiple sustained notes or chords.
- Infinite: Creates an indefinite number of layers that gradually morph together, ideal for ambient textures.
- DRY/VERB Switch: Toggles between a dry sustained signal and a sustained signal with integrated reverb.
- LATCH/MOMEN Switch: Configures the footswitch behavior.
- MANDAL: Press once to engage sustain, press again to disengage.
- MOMEN (Momentary): Sustain is active only while the footswitch is held down.
- Ayak pedalı: Engages and disengages the sustain effect based on the LATCH/MOMEN switch setting.
Temel İşlemler
To activate the sustain effect, play a note or chord and then press the footswitch. The pedal will capture and sustain the sound according to your settings. Experiment with the Decay, Level, and Fade In knobs to shape the sustained sound. Utilize the FX Type knob to explore different layering and infinite sustain possibilities, or load custom TonePrints for unique effects.
Bakım
The TC Electronic Infinite Sample Sustainer pedal is built for durability. To ensure its longevity and optimal performance:
- Pedal yüzeyini yumuşak, kuru bir bezle silerek temiz tutun. Aşındırıcı temizleyiciler veya çözücüler kullanmaktan kaçının.
- Pedalı aşırı sıcaklıklardan, nemden ve doğrudan güneş ışığından koruyun.
- Disconnect power when not in use for extended periods.
- Tüm kablo bağlantılarının sağlam bir şekilde takılı olup olmadığını düzenli olarak kontrol edin.
Sorun giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Pedala basıldığında ses çıkmaz. | Incorrect power supply, faulty cables, incorrect connections, Level knob set too low. | Verify power supply (9V DC, center-negative, 100mA minimum). Check all instrument cables. Ensure IN and OUT jacks are correctly connected. Increase LEVEL knob. |
| Sustain cuts out too quickly. | DECAY knob set too low, LATCH/MOMEN switch set to MOMEN. | Increase DECAY knob setting. If continuous sustain is desired, ensure LATCH/MOMEN switch is set to LATCH. |
| Sustained sound is distorted or noisy. | Input signal too hot, faulty power supply, ground loop. | Reduce input signal level from your instrument or preceding pedal. Try a different power outlet or isolated power supply. Check for ground loop issues in your setup. |
| Cannot load TonePrints. | USB connection issue, outdated TonePrint app, incorrect pedal mode. | Ensure USB cable is securely connected. Update the TC Electronic TonePrint app to the latest version. Follow app instructions for loading TonePrints. |
Özellikler
- Modeli: SONSUZ SAMPDESTEKLEYİCİ
- Boyutlar (U x G x Y): 4.8" x 2.91" x 1.97" (12.19 cm x 7.39 cm x 5.00 cm)
- Ağırlık: 12 ons (340 gram)
- Güç Gereksinimi: 9V DC, Center-Negative, 100mA minimum
- Donanım Arayüzü: USB (for TonePrint and firmware updates)
- Sinyal Formatı: Analog
- Renk: Mavi
Garanti ve Destek
TC Electronic products are covered by a limited warranty. For detailed warranty information, product registration, and technical support, please visit the official TC Electronic webSite üzerinden satın alabilir veya müşteri hizmetleriyle iletişime geçebilirsiniz. Garanti talepleriniz için satın alma belgenizi saklayın.
For the latest information and software downloads, visit: www.tcelektronik.com
