DS18 SB12A

DS18 SB12A 12-Inch Shallow Subwoofer Enclosure with Built-in Amplifier Kullanım Kılavuzu

Model: SB12A | Brand: DS18

1. Giriş

This manual provides detailed instructions for the installation, operation, and maintenance of your DS18 SB12A 12-inch Shallow Subwoofer Enclosure with Built-in AmpLütfen ürünün düzgün çalışmasını sağlamak ve hasarı önlemek için ürünü kullanmadan önce bu kılavuzu iyice okuyun.

The DS18 SB12A is an all-in-one car audio solution designed to deliver powerful bass in vehicles with limited space. It features a 12-inch subwoofer integrated into a sealed enclosure, powered by a built-in 350W RMS (700W MAX) monoblock digital ampcankurtaran.

2. Güvenlik Bilgileri

Önemli Güvenlik Önlemleri:

  • Herhangi bir elektrik işine başlamadan önce mutlaka aracın aküsünün negatif kutbunu ayırın.
  • Tüm kabloların sıkışmayı veya hasarı önlemek için düzgün bir şekilde yönlendirildiğinden ve sabitlendiğinden emin olun.
  • Belirtildiği gibi, güç ve topraklama bağlantıları için uygun kalınlıkta kablo kullanın.
  • Install the subwoofer in a secure location to prevent it from shifting during vehicle movement.
  • Cihazı neme veya aşırı sıcaklıklara maruz bırakmaktan kaçının.
  • Üniteyi kendiniz açmaya veya onarmaya çalışmayın. Tüm servis işlemlerini kalifiye personele yaptırın.
  • Prolonged exposure to high sound pressure levels can cause permanent hearing damage.

3. Paket İçeriği

Paketin içinde tüm öğelerin mevcut olduğundan emin olun:

  • DS18 SB12A 12-Inch Shallow Subwoofer Enclosure with Built-in Ampcankurtaran
  • Remote Bass Level Control Knob with Cable
  • Yüksek Seviye Giriş Donanımı
  • Mounting Hardware (screws, brackets if applicable)
  • Kullanım Kılavuzu (bu belge)

4. Ürün Özellikleri

  • Integrated 12-inch subwoofer and monoblock digital ampcankurtaran.
  • Compact sealed enclosure design for space-saving installation.
  • 350W RMS / 700W MAX power handling.
  • Adjustable Low Pass Filter (LPF).
  • Selectable Phase control (0-180°).
  • Variable Bass Boost (0-6 dB at 50Hz).
  • High-level (speaker level) and Low-level (RCA) inputs for versatile connectivity.
  • Remote bass level control for convenient adjustment.
  • Protection circuitry: Thermal, Over-Load, DC Output, Short Circuit.

5. Kurulum ve Kurulum

Doğru kurulum, en iyi performans ve güvenlik için çok önemlidir. Kurulum sürecinin herhangi bir aşamasından emin değilseniz, profesyonel bir oto ses sistemi kurulumcusuna danışın.

5.1 Montaj Yeri

Choose a secure and dry location for the subwoofer enclosure, such as the trunk or behind the seats in a truck. Ensure there is adequate ventilation around the amplifier section to prevent overheating. The shallow design of the SB12A is ideal for tight spaces.

DS18 SB12A subwoofer enclosure installed in a vehicle trunk, showing its compact size and dimensions.

Image: The DS18 SB12A subwoofer enclosure shown installed in a vehicle trunk, highlighting its compact dimensions (14.96" H x 19.3" W x 14.92" D1 / 7.4" D2) suitable for limited spaces.

5.2 Kablo Bağlantıları

Şuna bakın: amplifier control panel diagram for correct wiring. Ensure all connections are tight and secure.

Ayrıntılı view of the DS18 SB12A amplifier control panel with input and output terminals, and adjustment knobs.

Resim: Ayrıntılı view of'un amplifier control panel. This panel includes connections for power (GND, REM, +12V), fuse, high-level speaker inputs, RCA inputs, and RCA outputs, along with adjustment controls.

  1. Güç Bağlantısı (+12V): Connect an 8-gauge power cable directly from the vehicle's positive battery terminal to the "+12V" terminal on the amplifier. Install an appropriate fuse (30A) within 18 inches (45 cm) of the battery.
  2. Toprak Bağlantısı (GND): Connect an 8-gauge ground cable from the "GND" terminal on the amplifier to a clean, unpainted metal surface on the vehicle chassis. Ensure a good electrical connection.
  3. Uzaktan Açma (REM): Connect a remote turn-on wire from your head unit's remote output to the "REM" terminal on the ampKaldırıcı. Bu tel, onu döndürür. ampAmplifikatörü araçtaki ana üniteyle birlikte açıp kapatabilirsiniz.
  4. Ses Girişi:
    • Düşük Seviyeli Giriş (RCA): If your head unit has RCA pre-outs, connect RCA cables from the head unit's subwoofer or rear pre-out to the "INPUT" RCA jacks on the ampcankurtaran.
    • Yüksek Seviye Giriş (Hoparlör Seviyesi): If your head unit does not have RCA pre-outs, use the supplied high-level input harness. Connect the speaker wires from your head unit's rear speakers to the corresponding inputs on the harness, then plug the harness into the "SPK IN" connector on the ampcankurtaran.
  5. Uzaktan Bas Kontrolü: Plug the remote bass control knob into the designated port on the amplifier. Mount the knob in a convenient location for easy access.

6. Kullanım Talimatları

Kurulduktan sonra, ayarlayın ampEn iyi ses performansı için amplifikatör ayarları.

6.1 Ampkaldırıcı Kontroller

  • KAZANÇ: This control matches the input sensitivity of the amplifier to the output of your head unit. Start with the gain at minimum and slowly increase it until you hear distortion, then back off slightly.
  • LPF (Alçak Geçiş Filtresi): Adjusts the upper frequency limit of the subwoofer. Typically set between 50Hz and 120Hz. Frequencies above this setting will be filtered out.
  • BAS KUVVETLENDİRME: Increases the bass output at 50Hz. Use sparingly to avoid distortion and potential damage. Adjustable from 0-6 dB.
  • FAZ: Allows you to adjust the phase of the subwoofer output (0° or 180°) to match the phase of your other speakers. Experiment with both settings to find the one that provides the most coherent bass response.
  • UZAKTAN: Connects the wired remote bass level control.
DS18 SB12A remote bass level control knob with cable.

Image: The remote bass level control knob, which allows for convenient adjustment of the subwoofer's output level from the driver's seat.

7. Bakım

The DS18 SB12A requires minimal maintenance. Follow these guidelines to ensure longevity:

  • Keep the enclosure clean and free of dust and debris. Use a soft, dry cloth for cleaning.
  • Çevrede yeterli hava akışını sağlayın amplifier to prevent overheating. Do not block ventilation ports.
  • Tüm kablo bağlantılarını sıkılık ve korozyon açısından periyodik olarak kontrol edin.
  • Avoid placing heavy objects on the enclosure.

8. Sorun Giderme

If you experience issues with your DS18 SB12A, refer to the following troubleshooting guide:

SorunOlası NedenÇözüm
Güç Yok / Ses Yok
  • Sigorta atmış
  • Gevşek güç veya toprak bağlantısı
  • Uzaktan açma sinyali yok
  • Hatalı kablolama
  • 30A'lik sigortayı kontrol edin ve gerekirse değiştirin.
  • Tüm güç, topraklama ve uzaktan bağlantıların güvenli olduğundan emin olun.
  • Ensure head unit is providing a remote turn-on signal.
  • Kablolarda kopma veya kısa devre olup olmadığını kontrol edin.
Ses Yok (Güç LED'i Açık)
  • Input signal issue (RCA/High-Level)
  • Kazanç çok düşük ayarlanmış.
  • Araç ses sistemi çok düşük
  • RCA veya yüksek seviye giriş bağlantılarını kontrol edin.
  • Increase the GAIN control gradually.
  • Baş ünitesinin sesini artırın.
Bozuk ses
  • Kazanç çok yüksek ayarlanmış.
  • LPF set incorrectly
  • Bass Boost too high
  • Zayıf toprak bağlantısı
  • GAIN kontrolünü azaltın.
  • Adjust LPF to a suitable frequency (e.g., 80-100Hz).
  • Reduce Bass Boost.
  • Topraklama bağlantısının temiz ve sağlam olduğundan emin olun.
Amplifier Aşırı Isınma (Koruma LED'i Açık)
  • Yetersiz havalandırma
  • Uygunsuz empedans yükü
  • Extended high-volume operation
  • Çevrede yeterli hava akışını sağlayın ampcankurtaran.
  • Check speaker impedance (SB12A is 2 ohms).
  • Ses seviyesini azaltın veya izin verin ampserinlemek için lifier.

9. Özellikler

9.1 Muhafaza Özellikleri

  • İç hacim: 16L / 0.56 ft³
  • Yapılandırma Yükle: Paralel
  • Kutu Tipi: Mühürlü
  • Kutu Malzemesi: 0.59" MDF
  • Bitiş Malzemesi: Non-Woven fabric
  • Dimensions (H x W x D1 / D2): 14.96" (380mm) x 19.3" (490mm) x 14.92" (125mm) / 7.4" (188mm)
  • Ağırlık: Approximately 0.01 Ounces (Note: This value appears to be a data entry error. The actual weight of a subwoofer enclosure would be significantly higher.)

9.2 Subwoofer Specifications

  • Hoparlör Boyutu: 12" (312 mm)
  • Toplam Empedans: 2 ohm
  • RMS Güç İşleme: 350W
  • MAKS Güç Kullanımı: 700W
  • Hassasiyet (1w/1m): 87dB
  • Frekans Tepkisi: 30-250Hz
  • Ses Bobini Çapı: 1.75" (44.43 mm)
  • Ses Bobini Eski Malzemesi: Alüminyum
  • Sargı Malzemesi: EISV
  • Koni Malzeme: IPP
  • Çevre Malzemesi: Lastik
  • Sepet Malzemesi: SPCC
  • Mıknatıs Malzemesi: Ferrit
  • Mıknatıs Ağırlığı: 50 Oz

9.3 Ampkaldırıcı Özellikler

  • Amplifier Sınıfı: Dijital
  • Ampkaldırıcı Türü: Monoblok Subwoofer
  • Kanal Sayısı: 1 Kanal
  • Minimum Empedans: 2 Ohm
  • Sinyal Gürültü Oranı: 75 dB
  • Efficiency @ 4 ohms: %75
  • Toplam Harmonik Bozulma (THD): %0.30
  • Low Level Input Range: 0.1-0.6V
  • High Level Input Range: Evet
  • Seçilebilir X-Over: LPF Fixed
  • X-Over Filter Range: 51 - 200 Hz
  • Bas Güçlendirme Aralığı: 0-6 dB
  • Bas Yükseltme Frekansı: 50Hz
  • Faz Seçici: 0-180°
  • LED Göstergesi: Power - Protection
  • Güç Giriş Terminali Boyutu: 8 GA
  • Sigorta Boyutu: 30A
  • Uzaktan Seviye Kontrolü: Evet
  • Termal Koruma: Yes (75°C / 167°F)
  • Aşırı yükleme koruması: Evet
  • DC Çıkış Koruması: Evet
  • Kısa Devre Çıkış Koruması: Evet

10. Garanti Bilgileri

This product comes with a Limited Warranty. Please refer to the warranty card included with your product or visit the official DS18 webGaranti kapsamı, süresi ve talep süreciyle ilgili ayrıntılı hüküm ve koşullar için lütfen siteyi ziyaret edin.

11. Müşteri Desteği

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact DS18 customer support through their official webSiteye veya satın alma işleminizle birlikte verilen iletişim bilgilerine.

Ayrıca ziyaret edebilirsiniz DS18 Mağazası Amazon'da Daha fazla ürün bilgisi ve kaynağı için.

İlgili Belgeler - SB12A

Önview DS18 PU110A 10" Aktif Subwoofer Kabini Kullanım Kılavuzu
DS18 PU110A 10 inç aktif ince subwoofer kabini için kullanım kılavuzu ve kurulum rehberi; kamyonetler için fonksiyonları, kontrolleri, kablolamayı, teknik özellikleri ve garanti bilgilerini detaylandırmaktadır.
Önview DS18 EN-DF10 10" Sığ Aşağıya Doğru Ses Veren Subwoofer Kabini Kullanım Kılavuzu
DS18 EN-DF10 pasif subwoofer kabini için kurulum, teknik özellikler, ölçüler ve garanti bilgilerini detaylandıran kullanım kılavuzu. Aşağıya doğru ses veren tasarıma sahip 10 inçlik ince bir subwoofer içerir.
Önview DS18 PSW12.2D 12 İnç Çift Ses Bobinli Sığ Subwoofer Kullanım Kılavuzu
Bu kullanım kılavuzu, DS18 PSW12.2D 12 inç çift ses bobinli ince subwoofer için kapsamlı teknik özellikler, Thiele & Small parametreleri, önerilen kasa detayları ve ölçüm verilerini içermektedir. Ayrıca garanti bilgileri ve önemli güvenlik uyarılarını da kapsamaktadır.
Önview DS18 PSW12.4D 12 İnç Çift Ses Bobinli Sığ Subwoofer Kullanım Kılavuzu
Bu kullanım kılavuzu, DS18 PSW12.4D 12 inç çift ses bobinli ince subwoofer için ayrıntılı teknik özellikler, Thiele & Small parametreleri, önerilen kasa boyutları ve ölçüm bilgilerini içermektedir.
Önview DS18 JBASS Sığ Subwoofer Kutusu Kullanım Kılavuzu
DS18 JBASS ince subwoofer kutusunun kullanım kılavuzu; özellikleri, boyutları, bağlantı şemaları, Jeep JK, JKU, JL modelleriyle uyumluluğu ve 2x10" subwoofer'lar için kurulum bilgilerini detaylandırmaktadır.
Önview DS18 IXS10.4D 10-Inch Shallow Subwoofer Owner's Manual
Owner's manual for the DS18 IXS10.4D 10-inch shallow mount subwoofer, detailing specifications, motor components, Thiele & Small parameters, physical measurements, and recommended enclosure dimensions.