1. Giriş
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your LEDVANCE LEDValue Ceiling Gen4 20W LED Luminaire. Please read this manual thoroughly before installation and retain it for future reference.
The LEDVANCE Surface Circular luminaire is designed to provide comfortable and uniform illumination for indoor spaces. Its simple design facilitates easy installation and offers a remarkable light distribution with minimal glare.
Resim 1: Ön view of the LEDVANCE LEDValue Ceiling Gen4 20W LED Luminaire.
2. Güvenlik Talimatları
- Elektriksel Güvenlik: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure power is disconnected at the circuit breaker before installation, maintenance, or cleaning.
- Ürün Bütünlüğü: Do not modify or disassemble the luminaire. Doing so will void the warranty and may pose a safety risk.
- Çalışma Ortamı: This luminaire is designed for indoor use only (IP20 rating). Do not expose it to water or high humidity.
- İşleme: Handle the luminaire with care to avoid damage to the LED components or housing.
- İmha etmek: Ürünü, elektronik atıklarla ilgili yerel yönetmeliklere uygun olarak imha edin.
3. Paket İçeriği
Kuruluma başlamadan önce tüm bileşenlerin mevcut ve hasarsız olduğundan emin olun.
- LEDVANCE LEDValue Ceiling Gen4 20W LED Luminaire (1 unit)
- Montaj donanımı (vidalar, dübeller)
- Kullanım Kılavuzu (bu belge)
4. Kurulum (Setup)
Follow these steps carefully for proper installation. Ensure power is OFF at the main circuit breaker before starting.
- L'yi kaldıramp Kapak: Gently rotate the lamp cover counter-clockwise to detach it from the base.
- Kablolamayı Bağlayın: Connect the luminaire's wiring to the main power supply wires. Ensure correct polarity (Live, Neutral, Earth) as per local electrical codes. Use appropriate connectors.
- Montaj Tabanı: Align the holes on the luminaire base with the desired mounting location on the ceiling. Secure the base using the provided screws and wall plugs. Ensure the base is firmly attached.
- L'yi takınamp Kapak: l'yi yerleştirinamp cover back onto the base, aligning the tabs. Rotate it clockwise until it locks securely into place.
Image 2: Visual guide for the four-step installation process of the LED luminaire.
5. Kullanım Talimatları
Once installed and connected to the main power supply, the LEDVANCE LEDValue Ceiling Luminaire operates by a standard wall switch.
- Güç Açık: Flip the wall switch connected to the luminaire to the "ON" position. The light will illuminate instantly.
- Kapat: Flip the wall switch to the "OFF" position to turn off the light.
This luminaire does not feature dimming capabilities unless explicitly stated on the product packaging or specifications for a specific model variant.
6. Bakım
Düzenli bakım, aydınlatma armatürünüzün optimum performans göstermesini ve uzun ömürlü olmasını sağlar.
- Temizlik: Ensure the power is OFF before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the luminaire. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Denetleme: Periodically check the luminaire for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
- LED'ler: LED ışık kaynağı entegredir ve kullanıcı tarafından değiştirilemez.
7. Sorun Giderme
If you encounter issues with your luminaire, refer to the following common problems and solutions:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Luminaire does not turn on. | Elektrik yok; gevşek kablolama; arızalı anahtar. | Check circuit breaker. Ensure wiring connections are secure. Test the wall switch. |
| Işık titriyor. | Dengesiz güç kaynağı; gevşek bağlantı. | Verify stable power. Check wiring connections. |
| Işık çıkışı zayıf. | Dust accumulation on cover; incorrect voltage. | Clean the luminaire cover. Ensure the luminaire is connected to the correct voltag(100-240V). |
If the problem persists after attempting these solutions, contact a qualified electrician or LEDVANCE customer support.
8. Özellikler
Detailed technical data for the LEDVANCE LEDValue Ceiling Gen4 20W LED Luminaire.
Image 3: Detailed technical data sheet for the luminaire.
Teknik Veriler
| nominal vattage | 20.00 B |
| nominal hacimtage | 100...240 V |
| Şebeke frekansı | 50...60 Hz |
| Nominal akım | 180mA |
| Koruma sınıfı | I |
Fotometrik Veriler
| Işık akısı | 1600 lm |
| Işık etkinliği | 80 lm/W |
| Renk sıcaklığı | 6500K |
| Renksel geriverim indeksi Ra | ≥80 |
| Işın açısı | 120° |
Boyutlar ve Ağırlık
| Çap | 330.00 mm |
| Yükseklik | 65.00 mm |
| Ürün ağırlığı | 546.00 gr |
Malzemeler ve Renkler
| Ürün rengi | Beyaz |
| Konut rengi | Beyaz |
| Gövde malzemesi | Metal |
| Kapak malzemesi | Polimetilmetakrilat (PMMA) |
| cıva içeriği | 0.0 mg |
Uygulama ve Montaj
| Bağlantı türü | terminal |
| Koruma türü | IP20 |
9. Garanti Bilgileri
Specific warranty terms and conditions for this LEDVANCE product may vary by region and retailer. Please refer to the warranty card included with your purchase or visit the official LEDVANCE webDetaylı bilgi için sitemizi ziyaret edebilirsiniz.
Typically, LEDVANCE products come with a limited warranty covering manufacturing defects from the date of purchase. Keep your proof of purchase for warranty claims.
10. Destek ve İletişim
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact LEDVANCE customer support.
- Webalan: LEDVANCE'ın resmi sitesini ziyaret edin. webDestek kaynakları, sıkça sorulan sorular ve iletişim bilgileri için site.
- Müşteri Hizmetleri: Refer to your product packaging or the LEDVANCE website for regional customer service phone numbers or email addresses.
