Power Watchdog RV2130SP

Hughes Autoformers RV2130SP Voltage Booster with Surge Protection - 30 Amp Kullanıcı Kılavuzu

Model: RV2130SP | Brand: Power Watchdog

giriiş

This manual provides essential information for the safe and effective operation of your Hughes Autoformers RV2130SP Voltage Booster with Surge Protection. This device is designed to protect your RV's electrical system from low voltage conditions and power surges, ensuring optimal performance and longevity of your appliances.

Kutuda Neler Var?

Güvenlik Bilgileri

Read all instructions carefully before use. Failure to do so may result in property damage, electrical shock, or serious injury. Always prioritize safety when handling electrical equipment.

Temel Özellikler

Kurulum ve Bağlantı

Follow these steps to properly connect your RV2130SP unit to the RV park's power pedestal and your RV.

  1. Güç ünitesini inceleyin: Before connecting, visually inspect the RV park's power pedestal for any visible damage or signs of wear. Ensure the circuit breaker for the 30 Amp outlet is in the "OFF" position.
  2. Connect the RV2130SP Input: Plug the male end of the RV2130SP's power cord into the 30 Amp outlet on the RV park's power pedestal. Ensure a secure connection.
  3. Hughes Autoformers RV2130SP showing the input power cord

    Image: The input power cord of the RV2130SP, designed to connect to the RV park's power pedestal.

  4. Connect Your RV to RV2130SP Output: Plug your RV's 30 Amp shore power cord into the female receptacle on the RV2130SP unit.
  5. Hughes Autoformers RV2130SP showing the output power receptacle

    Image: The output power receptacle on the RV2130SP, where your RV's shore power cord connects.

    Close-up of the 30A 125V RV receptacle on the Hughes Autoformers RV2130SP

    Resim: Ayrıntılı view 30'in Amp, 125 Volt RV receptacle on the unit, showing its specifications and UL listing.

  6. Gücü Etkinleştir: Once both connections are secure, switch the circuit breaker on the RV park's power pedestal to the "ON" position.
  7. İşlemi Doğrulayın: Observe the LED indicators on the RV2130SP unit to confirm proper power and boosting status. Refer to the "Operation and LED Indicators" section for details.
Hughes Autoformers RV2130SP Voltage Booster with Surge Protection - 30 Amp

Image: The Hughes Autoformers RV2130SP unit, displaying its front panel with LED indicators and product labeling.

Operation and LED Indicators

The RV2130SP features a diagnostic panel with LED lights to indicate the status of the incoming power and the unit's operation. Understanding these indicators is crucial for safe and effective use.

LED Light Indication Guide

IşıkDurumTanım
Hat GücüYeşil AÇIKIndicates incoming power is present.
ZeminYeşil AÇIKIndicates proper ground connection.
DoğalYeşil AÇIKIndicates proper neutral connection.
GüçlendirmeYeşil AÇIKUnit is actively boosting voltage due to low incoming power.
Surge Capacity Used UpKırmızı AÇIKSurge protection module has absorbed a significant surge and needs replacement.
Hot / Ground / SurgeKırmızı AÇIKIndicates a hot/ground fault or a major surge event.
Hot / Neutral / SurgeKırmızı AÇIKIndicates a hot/neutral fault or a major surge event.
Eksik ZeminKırmızı AÇIKIndicates the power pedestal has no ground connection.
Ters kutupKırmızı AÇIKIndicates hot and neutral wires are reversed at the pedestal.
Missing NeutralKırmızı AÇIKIndicates the power pedestal has no neutral connection.

Otomatik Sestage Boosting

The RV2130SP automatically monitors incoming voltage. Eğer cilttage drops to 113 Volts or below, the unit will automatically engage its boosting function, increasing cilttage by 10%. If the incoming voltage is 114 Volts or higher, the unit will provide a 2% boost to maintain optimal power delivery to your RV.

Bakım

Surge Module Replacement

The RV2130SP features a replaceable surge protection module. If the "Surge Capacity Used Up" (Red) LED illuminates, it indicates that the surge module has absorbed a significant power surge and needs to be replaced to ensure continued surge protection for your RV.

To Replace the Surge Module:

  1. Disconnect the RV2130SP from all power sources (both your RV and the power pedestal).
  2. Locate the surge module access panel on the unit (refer to your product's physical diagram if unsure).
  3. Carefully remove the screws securing the access panel.
  4. Disconnect the old surge module from its connectors.
  5. Connect the new surge module, ensuring proper orientation and secure connections.
  6. Securely reattach the access panel with the screws.
  7. Reconnect the RV2130SP to power and verify that the "Surge Capacity Used Up" light is now off.

For replacement parts, contact Hughes Autoformers customer support.

Sorun giderme

Use the LED indicators on the unit to diagnose common issues. If a problem persists, contact customer support.

SorunIndication (LEDs)Olası NedenÇözüm
No Power to RVHiçbir LED yanmıyorNo power from pedestal; Unit not connected; RV breaker tripped.Check pedestal breaker; Ensure unit is fully plugged in; Check RV's main breaker.
Düşük Hacimtage KoşulBoosting LED ON (and other power LEDs green)gelen cilttage 114V'un altındadır.This is normal operation. The unit is boosting power. No action required unless voltage remains critically low after boosting.
Surge Protection ActivatedSurge Capacity Used Up (Red) LED ONUnit absorbed a large power surge.Replace the surge protection module as described in the Maintenance section.
Wiring Fault at PedestalMissing Ground (Red) OR Reverse Polarity (Red) OR Missing Neutral (Red) OR Hot/Ground/Surge (Red) OR Hot/Neutral/Surge (Red)Faulty or unsafe wiring at the power pedestal.Immediately disconnect the unit. Do NOT connect your RV. Notify park management of the wiring issue.
Unit Not BoostingBoosting LED OFF, but voltage düşüktür.Unit malfunction or voltage is not low enough to trigger 10% boost.Ensure incoming voltage is below 114V. If still not boosting, contact customer support.

Teknik Özellikler

ÖzellikDetay
ÖrnekRV2130SP
Ampöfke30 Amps
Cilttage114 Volt (Nominal)
Aşırı Gerilim Koruması2,400 Joules (Replaceable Module)
Cilttage Güçlendirme10% (when < 114V), 2% (when ≥ 114V)
Ürün Ağırlığı21.7 pound
Paket Boyutları15 x 10.6 x 10.3 inç
Özel ÖzelliklerSurge Protection, LED Diagnostics, Security Lock
ÜreticiHughes Otomatik Şekillendiriciler
MarkaGüç Gözlemcisi

Garanti ve Müşteri Desteği

For detailed warranty information, technical assistance, or to purchase replacement parts such as the surge protection module, please contact Hughes Autoformers customer support directly.

İletişim Bilgileri:

Please refer to the product packaging or the official Hughes Autoformers webEn güncel iletişim bilgileri, telefon numaraları ve e-posta adresleri için siteyi ziyaret edin.

Çevrimiçi Kaynaklar:

Ziyaret edin Power Watchdog Store on Amazon for additional product information, accessories, and customer reviews.

İlgili Belgeler - RV2130SP

Önview Power Watchdog Kurulum Kılavuzu ve Kablolama Şeması | Hughes Autoformers
Power Watchdog 50'nin kurulumuna ilişkin kısa kılavuz AMP Hughes Autoformers'ın aşırı gerilim koruyucusu, adım adım talimatlar ve bir kablo şeması da dahil.
Önview PWD 30A Güç İzleme Ünitesi Aşırı Gerilim Modülü Değiştirme Kılavuzu
PWD 30A Güç İzleme Ünitesindeki aşırı gerilim koruma modülünün değiştirilmesi için adım adım talimatlar, sökme ve yeniden montaj işlemlerini de içermektedir.
Önview Hughes Power Watchdog: Gelişmiş Karavan Aşırı Gerilim Koruyucu Kullanım Kılavuzu
Learn how to use the Hughes Power Watchdog, an advanced RV surge protector, to analyze and protect your RV from power issues. This guide covers setup, app usage, error codes, and troubleshooting.
Önview Hughes Autoformers Power Watchdog Kurulum ve Kullanım Talimatları
Hughes Autoformers Power Watchdog aşırı gerilim koruyucusunun kurulumu ve çalıştırılmasına ilişkin kapsamlı kılavuz; özellikler, teknik özellikler ve sorun giderme bilgileri dahil.
Önview Hughes Autoformers Power Watchdog PWD30EPOHW/PWD50EPOHW Kurulum ve Kullanım Kılavuzu
Hughes Autoformers Power Watchdog PWD30EPOHW ve PWD50EPOHW RV aşırı gerilim koruyucuları için kurulum, çalıştırma, teknik özellikler ve RV güç koruması için sorun giderme konularını kapsayan kapsamlı kılavuz.
Önview Hughes Autoformers Power Watchdog PWD30-EPO/PWD50-EPO Kurulum ve Kullanım Kılavuzu
Hughes Autoformers Power Watchdog aşırı gerilim koruyucuları (PWD30-EPO, PWD50-EPO) için kapsamlı kılavuz; kurulum, çalıştırma, teknik özellikler, hata kodu açıklamaları ve karavan güç koruması için mobil uygulama kullanımı konularını kapsamaktadır.