1. Giriş
This manual provides instructions for the installation, operation, and maintenance of your Sena Parani M10 Bluetooth Motorcycle Headset. The Parani M10 allows for seamless communication and entertainment while riding, featuring Bluetooth intercom capabilities and smartphone connectivity for music, GPS, and calls. Please read this manual thoroughly before using the device to ensure proper function and safety.
2. Paket İçeriği
The Parani M10 package typically includes the following components:
- Parani M10 Main Unit
- Kablolu Boom Mikrofon
- Speakers (pair)
- Kask Clamp Kit
- USB Şarj Kablosu
- Hoparlör Pedleri
- Hoparlörler için Cırt Cırt Bağlantı Elemanları
- Kullanım Kılavuzu (bu belge)
Figure 2.1: Parani M10 complete kit showing the main unit, wired microphone, and speakers.
3. Ürün Bittiview
Familiarize yourself with the main unit's components and controls.
Figure 3.1: Parani M10 Main Unit Controls and Ports.
- Jog Kadranı: Used for volume control, menu navigation, and various functions.
- Çok Fonksiyonlu Düğme: Primary button for power, pairing, and call management.
- LCD Ekran: Shows battery status, volume level, intercom pairing status, and other operational information.
- DC Power Charging & Firmware Upgrade Port: For charging the device and updating its firmware.
- Speakers and Microphone Port: Connection point for the wired speakers and microphone.
4. Kurulum ve Kurulum
The Parani M10 is designed for easy installation on most motorcycle helmets.
4.1 Attaching the Main Unit to the Helmet
- Kaskınızın sol tarafında klips için uygun bir yer seçin.amp kiti.
- Kaskın üzerindeki vidaları gevşetin.amp kit and slide it between the helmet shell and the inner padding. Ensure it is securely fastened.
- Slide the Parani M10 main unit onto the clamp yerine oturana kadar.
Figure 4.1: Parani M10 unit installed on a helmet.
4.2 Hoparlör ve Mikrofon Kurulumu
- Attach the hook and loop fasteners to the inside of your helmet, aligning them with your ears.
- Press the speakers onto the fasteners. Ensure the speakers are positioned directly over your ears for optimal audio quality.
- Attach the wired boom microphone to the inside of the helmet, positioning it close to your mouth but not directly in front of it to avoid wind noise.
- Route the speaker and microphone wires neatly under the helmet padding to the main unit's port.
- Connect the speaker/microphone cable to the corresponding port on the Parani M10 main unit.
4.3 Cihazı Şarj Etme
Before first use, fully charge the Parani M10. Connect the USB charging cable to the DC Power Charging Port on the main unit and to a USB power source. The LCD display will indicate charging status.
5. Kullanım Talimatları
5.1 Güç Açma/Kapatma
- Güç Açık: Çok İşlevli Düğmeyi 1 saniye basılı tutun.
- Kapat: Çok İşlevli Düğmeyi 5 saniye basılı tutun.
5.2 Ses Kontrolü
Rotate the Jog Dial clockwise to increase volume and counter-clockwise to decrease volume. The LCD display will show the current volume level.
Figure 5.1: LCD display showing pairing status and volume.
5.3 Akıllı Telefon Eşleştirme
- With the M10 powered off, press and hold the Multi-function Button for 5 seconds until the LED flashes red and blue, indicating pairing mode.
- Akıllı telefonunuzda Bluetooth ayarlarına gidin ve yeni cihazları arayın.
- Select "Parani M10" from the list of available devices.
- Once paired, the LED will flash blue, and the LCD will confirm connection.
- You can now listen to music, GPS navigation, and make/receive phone calls through your headset.
5.4 Bluetooth İnterkom
The Parani M10 supports intercom communication with up to four other Parani users on its dedicated Bluetooth intercom network.
- İnterkom Eşleştirme:
- Ensure both M10 units are powered on.
- On one M10 unit, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue.
- On the second M10 unit, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue.
- The units will automatically search and pair. Once paired, the LED will flash blue.
- Repeat this process for additional units (up to four total).
- Starting/Ending Intercom Conversation:
- To start an intercom conversation, tap the Jog Dial.
- To end an intercom conversation, tap the Jog Dial again.
5.5 Telefon Görüşmeleri
- Cevap Çağrısı: Çok İşlevli Düğmeye dokunun.
- Çağrı Sonu: Çok İşlevli Düğmeye dokunun.
- Çağrıyı Reddet: Çok İşlevli Düğmeyi 2 saniye basılı tutun.
- Sesli arama: In standby mode, press and hold the Multi-function Button for 3 seconds. (Requires smartphone support for voice commands).
6. Bakım
6.1 Temizlik
Ana üniteyi yumuşak bir bezle silin.amp cloth. Do not use harsh chemicals or solvents. Ensure all ports are dry before charging or use.
6.2 Pil Bakımı
- Pil ömrünü korumak için, cihaz kullanılmadığı zamanlarda bile düzenli olarak şarj edin.
- Avoid storing the device in extreme temperatures.
- Do not attempt to replace the internal battery yourself. Contact Sena support for battery service.
6.3 Firmware Güncellemesi
Sena'yı periyodik olarak kontrol edin website for firmware updates. Updating the firmware can improve performance and add new features. Connect the device to your computer using the USB cable and follow the instructions provided by Sena's Device Manager software.
7. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Cihaz açılmıyor. | Pil zayıf. | Cihazı tamamen şarj edin. |
| Akıllı telefonla eşleştirilemiyor. | Device not in pairing mode; smartphone Bluetooth off; interference. | Ensure M10 is in pairing mode (red/blue flashing LED). Turn smartphone Bluetooth off and on. Move away from other Bluetooth devices. |
| İnterkom bağlantısı kurulmuyor. | Units not in intercom pairing mode; out of range; already connected to other devices. | Ensure both M10 units are in intercom pairing mode. Reduce distance between units. Disconnect from other Bluetooth devices before intercom pairing. |
| Hoparlörlerden ses gelmiyor. | Volume too low; speakers not connected properly; faulty speakers. | Increase volume using the Jog Dial. Check speaker connections. Test with another audio source if possible. |
| Mikrofon çalışmıyor. | Microphone not connected properly; faulty microphone. | Check microphone connection to the main unit. Ensure microphone is positioned correctly. |
7.1 Fabrika Ayarlarına Sıfırlama
If issues persist, a factory reset may resolve them. To perform a factory reset, press and hold the Multi-function Button and the Jog Dial simultaneously for 10 seconds. The device will reset to its default settings.
8. Özellikler
| Model Adı | Parani M10 |
| Bluetooth Sürümü | Bluetooth 5.1 |
| interkom aralığı | Up to 1 km (0.6 miles) in open terrain |
| Maksimum İnterkom Kullanıcıları | 4 (Parani-only network) |
| Konuşma Zamanı | 16 saate kadar |
| Şarj Süresi | Yaklaşık 2.5 saat |
| Çalışma Sıcaklığı | -10°C ila 55°C (14°F ila 131°F) |
| Ağırlık | Yaklaşık. 60 gr (2.1 ons) |
Note: Specifications are subject to change without notice. Actual performance may vary based on environmental conditions and usage.
9. Garanti ve Destek
9.1 Garanti Bilgileri
Sena products are covered by a limited warranty from the date of purchase. For detailed warranty terms and conditions, please refer to the official Sena webSatın alma belgenizi veya ürününüzle birlikte verilen garanti belgesini saklayın. Garanti talepleriniz için satın alma belgenizi saklayın.
9.2 Müşteri Desteği
Teknik destek, sorun giderme veya genel sorularınız için lütfen resmi Sena web sitesini ziyaret edin. website for support resources, FAQs, and contact information. You can also reach out to your local dealer for assistance.
- Sena Webalan: www.sena.com
- parani Webalan: www.parani.com
