1. Giriş
This manual provides detailed instructions for the installation, operation, and maintenance of your Antec NX700 Mid-Tower ATX Gaming Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and safe usage.
Figure 1: Antec NX700 Mid-Tower ATX Gaming Case overview.
Temel Özellikler
- 3D Geometric Mesh Front Panel: Designed for optimal airflow and aesthetic appeal.
- Included ARGB Fans: Comes with two 185mm ARGB fans in the front and one 120mm ARGB fan in the rear for effective cooling and customizable lighting.
- Temperli Cam Yan Panel: A 4mm thick tempered glass side panel provides a clear view İç bileşenlerinizin.
- Kapsamlı Radyatör Desteği: Supports up to a 360mm radiator for advanced liquid cooling solutions.
- Versatile I/O Panel: Features Power, LED control button, Reset, 2 x USB 3.0 ports, and MIC/HD-AUDIO jacks.
- Anakart Uyumluluğu: ATX, Micro-ATX ve Mini-ITX anakartları destekler.
Figure 2: Close-up of the 3D geometric mesh front panel, designed for enhanced airflow.
2. Kurulum ve Kurulum
Follow these steps to install your components into the Antec NX700 case.
2.1 Included Fans Installation
The case comes pre-installed with two 185mm ARGB fans at the front and one 120mm ARGB fan at the rear. Ensure these fans are properly connected to your motherboard or a fan controller for power and ARGB functionality.
Figure 3: Illustration of the included 2 x 185mm ARGB front fans and 1 x 120mm ARGB rear fan.
2.2 Soğutma Sistemi Yapılandırması
The NX700 supports various fan and radiator configurations to optimize cooling performance.
- Ön: Supports 3 x 120mm, 3 x 140mm, or 2 x 185mm fans. Radiator support up to 360mm.
- Tepe: Supports 2 x 120mm or 2 x 140mm fans. Radiator support up to 280mm.
- Arka: Supports 1 x 120mm or 1 x 140mm fan. Radiator support up to 140mm.
- Güç Kaynağı Örtüsü: 2 adet 120 mm fanı destekler.
Figure 4: Diagram illustrating fan and radiator mounting options within the case.
Figure 5: Illustration showing space for a 360mm radiator installation at the front, even with 185mm fans.
2.3 Bileşen Kurulumu
The NX700 offers ample space for various components. Ensure all cables are routed neatly for optimal airflow and aesthetics.
- Anakart: Supports ATX motherboards (up to 305mm x 275mm).
- CPU Soğutucu: Maksimum yükseklik 170 mm'dir.
- Grafik Kartı (GPU): Maximum length of 340mm.
- Güç Kaynağı (PSU): Supports PSUs up to 200mm (with HDD) or 365mm (without HDD).
- Depolamak: 2 x 3.5" HDD / 2.5" SSD (convertible) and 4 x 2.5" SSDs.
Figure 6: Internal layout showing maximum dimensions for CPU cooler, GPU, and motherboard support.
Şekil 7: Dahili view of the NX700 case with various components installed, demonstrating space and layout.
2.4 Video Guide for Assembly
Watch this official video for a visual guide on the Antec NX700 Mid-Tower ATX Gaming Case features and assembly process.
Video 1: Resmi olarak bittiview and assembly guide for the Antec NX700 Mid-Tower ATX Gaming Case.
3. Kullanım Talimatları
3.1 Giriş/Çıkış Paneli Fonksiyonları
The top I/O panel provides convenient access to essential controls and ports.
- Güç Düğmesi: Sistemi açar veya kapatır.
- LED Kontrol Düğmesi: Cycles through various ARGB lighting modes for the included fans.
- Sıfırlama Düğmesi: Sistemi yeniden başlatır.
- USB 3.0 Bağlantı Noktaları (x2): Yüksek hızlı veri aktarımı için.
- MIC/HD-AUDIO Jacks: Kulaklık ve mikrofon bağlamak için.
Şekil 8: Ayrıntılı view of the top I/O panel with power, LED control, USB 3.0, and audio ports.
3.2 ARGB Fan Kontrolü
The included ARGB fans can be controlled either via the dedicated LED button on the I/O panel or synchronized with your motherboard's ARGB software.
- Using the LED Control Button: Press the LED button on the I/O panel to cycle through pre-programmed lighting effects.
- Anakart Senkronizasyonu: To sync with your motherboard, connect the ARGB cables from the fans to a compatible 3-pin 5V ARGB header on your motherboard. Use your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion) to control the lighting.
Figure 9: The Antec NX700 case showcasincanlı ARGB aydınlatma özellikleriyle.
4. Bakım
Regular maintenance helps ensure the longevity and optimal performance of your Antec NX700 case.
- Toz Filtreleri: Periodically clean the dust filters located at the top and bottom of the case. Gently remove them and use compressed air or a soft brush to clear accumulated dust.
- Case Exterior: Dış yüzeyleri yumuşak, damp Bez. Aşındırıcı temizleyicilerden veya çözücülerden kaçının.
- Temperli Cam Panel: Clean the tempered glass panel with a microfiber cloth and a glass cleaner designed for electronics. Avoid excessive force or harsh chemicals.
- İç Temizlik: Every few months, open the case and use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning.
5. Sorun Giderme
Bu bölümde, Antec NX700 kasanızla karşılaşabileceğiniz yaygın sorunlar ele alınmaktadır.
5.1 Fans Not Spinning or Lighting Up
- Güç Bağlantısı: Verify that all fan power cables are securely connected to the motherboard fan headers or a fan controller.
- ARGB Bağlantısı: Ensure ARGB cables are correctly connected to a 3-pin 5V ARGB header on the motherboard or the case's LED controller. Incorrect connection (e.g., to a 4-pin 12V RGB header) can damage the LEDs.
- LED Düğme İşlevselliği: If using the case's LED button, ensure it is functioning. Try cycling through modes.
- Anakart Yazılımı: If using motherboard sync, check your motherboard's ARGB software for fan control and lighting settings.
- Molex Connector: Some fan controllers or hubs may require a Molex connector for power. Ensure this is properly connected to your power supply.
5.2 No Power to System
- PSU Connection: Ensure the power supply is properly installed and connected to the motherboard and all components. Check that the PSU switch is in the 'ON' position.
- Ön Panel Konektörleri: Verify that the front panel power switch cable is correctly connected to the motherboard's front panel header. Refer to your motherboard manual for the correct pinout.
5.3 Missing Motherboard Mounting Stand-offs
While the case includes standard stand-offs, some motherboard layouts (e.g., certain ATX boards) may require additional stand-offs for full support. Ensure all necessary stand-offs are installed to prevent motherboard flex and potential damage.
6. Özellikler
Detailed technical specifications for the Antec NX700 Mid-Tower ATX Gaming Case.
| Özellik | Şartname |
|---|---|
| Marka | Öntek |
| Seri | NX700 |
| Model Adı | NX700 |
| Ürün Model Numarası | 0-761345-81072-2 |
| Dava Türü | Orta kule |
| Anakart Uyumluluğu | ATX, Mikro ATX, Mini ITX |
| Malzeme | SPCC + Plastic, Tempered Glass |
| Ürün Boyutları (UxGxY) | 17.32 x 8.66 x 19.37 inç (440 x 220 x 492 mm) |
| Ürün Ağırlığı | 15.84 pound (7.2 Kilogram) |
| Dahil Fanlar | 2 x 185 mm ARGB (Ön), 1 x 120 mm ARGB (Arka) |
| Ön Fan Desteği | 3x120mm / 3x140mm / 2x185mm |
| En Üst Düzey Taraftar Desteği | 2 x 120 mm / 2 x 140 mm |
| Arka Fan Desteği | 1 x 120 mm / 1 x 140 mm |
| PSU Shroud Fan Support | 2x120mm |
| Ön Radyatör Desteği | 360mm'ye kadar |
| Üst Radyatör Desteği | 280mm'ye kadar |
| Arka Radyatör Desteği | 140mm'ye kadar |
| Maksimum CPU Soğutucu Yüksekliği | 170mm |
| Maksimum GPU Uzunluğu | 340mm |
| Maksimum PSU Uzunluğu | 200mm (with HDD) / 365mm (without HDD) |
| Sürücü bölmeleri | 2 x 3.5" HDD / 2.5" SSD (convertible), 4 x 2.5" SSD |
| G/Ç Paneli | Power, LED Control, Reset, 2 x USB 3.0, MIC/HD-AUDIO |
Figure 10: Dimensions of the Antec NX700 Mid-Tower ATX Gaming Case.
Şekil 11: Arka view of the Antec NX700, showing expansion slots and fan mount.
7. Garanti ve Destek
For warranty information, technical support, or to inquire about replacement parts, please visit the official Antec website or contact Antec customer service. Keep your proof of purchase for warranty claims.
Antec Resmi Webalan: www.antec.com
