giriiş
Thank you for choosing the FLYLINKTECH Car Jump Starter with Air Compressor. This versatile device is designed to provide emergency jump-starting for vehicles, inflate tires, and serve as a portable power bank and LED light source. Please read this manual thoroughly before use to ensure safe and optimal operation.
Ürün Bittiview
The FLYLINKTECH CF700 is a multi-functional device combining a powerful jump starter, a 150 PSI air compressor, a 24000mAh power bank, and an emergency LED light. It is suitable for all gas engines and diesel engines up to 8.0L.

Figure 1: What's in the Box - The jump starter unit, smart jumper cables, air hose with various nozzles, USB charging cable, and carrying case.
Temel Özellikler
- Battery Starter: 2500A peak current, 1200A starting current, capable of starting all gas and 8.0L diesel engines.
- Taşınabilir şarj aleti: 24000mAh capacity with 2 USB outputs (one Quick Charge) and a DC 12-16.8V / 10A port for charging various devices and car accessories.
- Tire Compressor: Powerful 150 PSI inflator with a digital display for setting desired pressure and automatic shut-off. Includes pins for inflating balls, rubber boats, and mats.
- Acil Durum LED Işığı: 5W bright LED light with multiple modes (stable, SOS, strobe) for emergency situations, night breakdowns, or repairs.
- 12V Soket: Connects various car accessories such as additional USB chargers or car fans.
- Akıllı Koruma Sistemi: Features short circuit protection, high/low temperature protection, reverse connection protection, surge voltage koruma, yüksek hacimtage protection, and over discharge protection.

Şekil 2: Üzeriview of the multi-functional features of the device.
Güvenlik Bilgileri
Always follow these safety guidelines to prevent injury or damage to the device and vehicle:
- Ürünü kullanmadan önce tüm talimatları okuyunuz.
- Ürünü suya daldırmayın.
- Ürünü yanıcı sıvıların, gazların veya tozların bulunduğu patlayıcı ortamlarda çalıştırmayın.
- Çocukların erişemeyeceği yerde saklayınız.
- Ensure proper polarity connection when jump-starting to avoid sparks and damage. The smart clamp provides protection against reverse connection.
- Do not touch the air hose connector immediately after prolonged inflation, as it may be hot.

Figure 3: The device incorporates multiple safety protections for user and vehicle safety.
Kurmak
Cihazın Şarj Edilmesi
Before first use, fully charge the jump starter. Use the provided USB-C charging cable to connect the device to a compatible USB power adapter (not included). The digital display will indicate the charging status. It is recommended to recharge the device every 3-6 months to maintain battery health, even if not in use.
Kullanım Talimatları
1. Aracı Çalıştırma
- Akü takviye cihazının yeterince şarj edilmiş olduğundan emin olun.
- Connect the smart jumper cables to the jump starter's jumping port.
- kırmızı cl'yi takınamp Araç aküsünün pozitif (+) terminaline.
- Siyah cl'yi takınamp to the negative (-) terminal of the vehicle's battery. The smart clamp will indicate a safe connection (e.g., green light).
- Aracın motorunu çalıştırın.
- Motor çalıştıktan hemen sonra kapağı çıkarın.amps from the battery, then disconnect the smart jumper cables from the jump starter.

Figure 4: Proper connection for jump starting a vehicle.
Video 1: Demonstration of jump starting a vehicle using a similar device. The video shows connecting the clamps to the battery and starting the car.
2. Lastik Şişirme
- Hava hortumunu akü takviye cihazındaki belirtilen bağlantı noktasına vidalayın.
- Attach the air hose nozzle securely to the tire valve stem.
- Turn on the device and select the desired pressure unit (PSI, BAR, KPA).
- Use the '+' and '-' buttons to set the target tire pressure.
- Şişirme işlemine başlamak için başlat düğmesine basın. Kompresör, önceden ayarlanmış basınca ulaşıldığında otomatik olarak duracaktır.
- Disconnect the air hose from the tire valve and then from the jump starter.

Figure 5: The device connected to a car tire for inflation.
Video 2: A seller demonstration of the car jump starter's air compressor function, showing how to connect and inflate a tire.
3. Power Bank Olarak Kullanımı
Connect your electronic devices (phones, tablets, etc.) to the USB output ports or car accessories to the DC 12-16.8V / 10A port for charging.

Figure 6: The device being used to charge multiple electronic devices.
4. LED Işığın Kullanımı
Press and hold the light button to turn on the LED light. Short presses will cycle through different modes: stable light, SOS signal, and strobe light. Press and hold again to turn off.

Figure 7: The device's LED light providing illumination in a dark setting.
Bakım
- Cihazı temiz ve kuru tutun.
- Serin, kuru ve doğrudan güneş ışığından ve yüksek sıcaklıklardan uzak bir yerde saklayın.
- Recharge the device at least once every 3-6 months to prevent deep discharge and prolong battery life.
- Inspect cables and accessories for any damage before each use.
Sorun giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Device does not turn on/charge | Battery completely depleted or charging cable/adapter faulty. | Ensure charging cable and adapter are working. Try a different charging source. Allow sufficient time for initial charge. |
| Araç akü takviyesiyle çalışmıyor | yanlış clamp connection, insufficient device charge, or vehicle battery severely damaged. | cl'yi kontrol etamp polarity and ensure secure connection. Fully charge the jump starter. Consult a mechanic if vehicle battery is beyond jump-starting. |
| Hava kompresörü şişmiyor | Air hose not securely attached, incorrect pressure setting, or device not powered on. | Ensure air hose is tightly screwed in and nozzle is secure on valve. Verify pressure setting and device power. |
| Air compressor stops prematurely | Preset pressure reached (automatic shut-off). | This is normal operation. Check the current tire pressure. |
Özellikler
- Marka: UÇAK BAĞLANTI TEKNOLOJİSİ
- Modeli: CF700
- Güncel Tepe: 2500A
- Başlangıç Akımı: 1200A
- Pil Kapasitesi: 24000mAh
- Araç Hizmet Tipi: Passenger Car (All Gas or 8.0L Diesel)
- Air Compressor Pressure: 150 PSI
- USB Çıkışı: 2 ports (one Quick Charge)
- DC Çıkışı: 12-16.8V / 10A
- Ürün Ağırlığı: 5.74 pound
- Ürün Ölçüleri: 8.66 x 6.69 x 3.35 inç
- Pil Hücresi Kompozisyonu: Lityum İyon
- Cilttage: 12 Volt
Garanti ve Destek
Bu ürün bir 24-Months Global Warranty. FLYLINKTECH is committed to providing Life Time After-sale Service & Technical Support. For any inquiries or assistance, please contact FLYLINKTECH customer service.





