Reloop RP-7000 MK2 Direct Drive High Torque Turntable Instruction Manual

1. Giriş

This manual provides essential information for the safe and efficient operation of your Reloop RP-7000 MK2 Direct Drive High Torque Turntable. Please read these instructions thoroughly before using the product to ensure proper setup, optimal performance, and longevity of your equipment. Keep this manual for future reference.

2. Güvenlik Talimatları

• Güç Kaynağı: Cihazı yalnızca belirtilen voltajdaki bir AC prizine bağlayın.tage. Güç kablosunun hasarlı veya sıkışmış olmadığından emin olun.
• Nem: Do not expose the unit to rain, moisture, or excessive humidity. Avoid placing liquid-filled objects on the turntable.
• Havalandırma: Ünitenin etrafında yeterli havalandırma olduğundan emin olun. Havalandırma açıklıklarını kapatmayın.
• Atama: Place the turntable on a stable, level surface away from direct sunlight, heat sources, and strong magnetic fields.
• Temizlik: Disconnect the power before cleaning. Use a soft, dry cloth. Avoid liquid cleaners or solvents.
• Servis: Cihazın bakımını kendiniz yapmaya çalışmayın. Tüm bakım işlemlerini yetkili personele yaptırın.

3. Paket İçeriği

Aşağıda listelenen tüm öğelerin paketinizde bulunduğundan emin olun. Herhangi bir öğe eksik veya hasarlıysa, derhal satıcınızla iletişime geçin.

• Reloop RP-7000 MK2 Direct Drive High Torque Turntable (x2)
• Toz Kapağı (x2)
• Digital Turntable Stylus Scale
• Record Care Solution
• Güç kablosu
• RCA Kablosu
• Topraklama kablosu
• slipmat
• Karşı ağırlık
• Headshell with Cartridge (pre-mounted or separate, depending on region/bundle)

Şekil 1: Üzerindeview of the Reloop RP-7000 MK2 turntable bundle components.

4. Kurulum

4.1 Paketten Çıkarma ve Yerleştirme

1. Tüm parçaları ambalajından dikkatlice çıkarın. İlerideki taşıma için ambalajı saklayın.
2. Place the turntable on a flat, stable, and vibration-free surface. Ensure there is enough space for the dust cover to open fully.
3. Attach the dust cover by aligning its hinges with the slots on the turntable's rear.

Şekil 2: Turntable with the dust cover in place.

4.2 Platter and Slipmat Installation

1. Carefully place the platter onto the center spindle. Ensure it sits flush.
2. Place the slipmat on top of the platter.

4.3 Tonearm and Cartridge Setup

1. If not pre-mounted, attach the headshell with the cartridge to the tonearm. Secure it by turning the locking ring.
2. Screw the counterweight onto the rear of the tonearm.
3. Balance the Tonearm: Tonearm cl'yi serbest bırakınamp. Adjust the counterweight until the tonearm is perfectly balanced and floats horizontally.
4. İzleme Kuvvetini Ayarla: Return the tonearm to its rest and clamp it. Rotate the numbered ring on the counterweight to '0' without moving the counterweight itself. Then, rotate the entire counterweight to the recommended tracking force for your cartridge (typically 2-4 grams for DJ cartridges).
5. Anti-Skate ayarını yapın: Adjust the anti-skate dial to match the tracking force setting.

4.4 Using the Digital Stylus Scale

The included digital stylus scale allows for precise measurement of your cartridge's tracking force, ensuring optimal sound quality and minimizing record wear.

1. Place the stylus scale on the platter.
2. Güç düğmesini kullanarak teraziyi açın.
3. Carefully lower the stylus onto the designated measuring point on the scale.
4. Read the tracking force displayed. Adjust the tonearm's counterweight as needed until the desired force is achieved.

Şekil 3: Digital Stylus Scale for precise tracking force measurement.

4.5 Bağlantılar

1. Ses Çıkışı: Connect the RCA cables from the turntable's audio output to the PHONO input of your mixer or amplifier. If your mixer/amplifier does not have a PHONO input, you will need an external phono preampcankurtaran.
2. Topraklama kablosu: Connect the ground wire from the turntable to the ground terminal on your mixer or amplifier to reduce hum.
3. Güç: Connect the power cable to the turntable and then to a suitable AC power outlet.

5. Kullanım Talimatları

5.1 Temel Oynatma

1. Place a record on the slipmat.
2. Select the appropriate speed (33, 45, or 78 RPM) using the speed selector buttons.
3. Basın BAŞLAT/DURDUR button to begin platter rotation.
4. Carefully lift the tonearm using the cueing lever and position the stylus over the desired groove on the record.
5. Lower the cueing lever to gently place the stylus onto the record.
6. To stop playback, lift the tonearm using the cueing lever, return it to the tonearm rest, and press the BAŞLAT/DURDUR düğme.

Şekil 4: Turntable platter and control layout.

5.2 Perde Kontrolü

The pitch fader allows you to adjust the playback speed (BPM) of the record. Move the fader up or down to increase or decrease the pitch. The pitch range can be selected using the range buttons (e.g., +/- 8%, 16%, 50%).

5.3 Ters Fonksiyon

The RP-7000 MK2 features a reverse playback function. Press the TERSİ button to change the direction of platter rotation. Press it again to return to normal playback.

6. Bakım

6.1 Pikabın Temizlenmesi

• Temizlemeden önce daima gücü kesin.
• Use a soft, dry, lint-free cloth to wipe the surface of the turntable and dust cover.
• Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.

6.2 Kalem Bakımı

• Gently brush the stylus from back to front using a soft stylus brush to remove dust and debris.
• Kalem ucuna parmaklarınızla dokunmaktan kaçının.

6.3 Kayıt Bakımı

The included record care solution helps maintain the quality of your vinyl records and prolong their lifespan.

1. Apply a small amount of record care solution to a clean, soft, lint-free cloth or a dedicated record cleaning brush.
2. Gently wipe the record surface in a circular motion, following the grooves.
3. Allow the record to dry completely before playing.

Şekil 5: Record Care Solution for maintaining vinyl quality.

7. Sorun Giderme

8. Özellikler

9. Garanti ve Destek

Reloop products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official Reloop website. For technical support or service inquiries, please contact your authorized Reloop dealer or distributor.

Üretici: Yeniden döngüye al

İlk Mevcut Tarih: 8 Temmuz 2022