KAIWEETS KT360A Lazer Seviye Ölçüm Cihazı Kullanım Kılavuzu

1. Önemli Güvenlik Bilgileri

Please read and understand all safety instructions before operating this device. Failure to follow these instructions may result in laser radiation exposure or other hazards.

• Lazer Güvenliği: Do not point the laser directly into eyes. This product is a Class II laser device, with output power less than 1mW.
• Lazer ışınının doğrudan gözlerinize temas etmesinden kaçının.
• Cihazı sökmeyin. Onarımlar yalnızca yetkili personel tarafından yapılmalıdır.
• Cihazı çocukların erişemeyeceği yerde saklayınız.

2. Ürün Bittiview

The KAIWEETS KT360A is a 3x360 green line laser level designed for precise leveling and alignment tasks. It features high visibility green laser lines and self-leveling capabilities, making it suitable for various indoor and outdoor applications.

Image: The KAIWEETS KT360A laser level emitting bright green 360-degree lines.

Temel Özellikler:

• 3 x 360° Green Laser Lines: One horizontal and two vertical lines provide full room coverage for floors, walls, and ceilings.
• Yüksek Görünürlük: Green laser technology offers 4 times better visibility compared to red lasers.
• Kendiliğinden Dengeleme Fonksiyonu: Automatically levels within ±4° range.
• Darbe Modu: Allows use with a laser detector (not included) for extended range up to 196ft/60m in bright conditions.
• Individual Line Control: Laser lines can be switched on and off independently.
• Dahil Aksesuarlar: Comes with a small adapter for fine adjustment and a telescopic tripod for versatile placement.

3. Paket İçeriği

Paketinizde tüm öğelerin mevcut olduğundan emin olun:

• KAIWEETS KT360A Laser Level
• Small Adapter (for fine adjustment)
• Telescopic Tripod (Max height 3.7m/12.18ft)
• Mounting Bracket with 1/4"-20 Mounting Thread and 5/8"-11 Thread Adapter (part of tripod kit)
• Kullanım Kılavuzu (bu belge)

Image: Complete KAIWEETS KT360A kit, showing the laser level, adapter, and tripod components.

4. Kurulum

4.1 Installing the Laser Level

1. Ensure the laser level is placed on a stable, level surface or mounted securely.
2. The device can be mounted onto a tripod using its standard mounting thread.
3. For fine adjustments, attach the laser level to the provided adapter.

Image: Demonstrates multiple ways of placing the laser level, including on a magnetic bracket and a tripod.

4.2 Tripodun Montajı

1. Unfold the tripod legs and extend them to the desired height.
2. Assemble the telescopic pole sections if using the full height.
3. Attach the mounting bracket to the top of the pole.
4. Secure the laser level to the mounting bracket using the 1/4"-20 thread. Use the 5/8"-11 thread adapter if necessary.

Image: The telescopic tripod components, including pole sections, base, and mounting bracket.

Image: The KAIWEETS KT360A laser level mounted on the telescopic tripod, projecting horizontal and vertical lines on a wall.

4.3 Using the Adapter for Fine Adjustment

The small adapter allows for precise positioning of the laser level.

• Attach the laser level to the adapter.
• Use the micro knob on the adapter to rotate the laser level 360° clockwise or counterclockwise for horizontal alignment.
• The adapter also provides X-axis and Y-axis adjustments for fine-tuning the laser line position within a 1 cm range.

Image: The small adapter for the laser level, showing its robust construction and adjustment knobs.

Image: The laser level mounted on the adapter, illustrating its 360-degree rotation, X-axis, and Y-axis fine adjustment capabilities.

5. Kullanım Talimatları

5.1 Açma/Kapatma ve Mod Seçimi

1. Güç Açık: Slide the main switch to the "ON" position. The laser level will automatically enter self-leveling mode.
2. Otomatik Tesviye Modu: When the pendulum is unlocked, the device will self-level. If the tilt angle exceeds 4°, the laser lines will flash rapidly to indicate an out-of-level condition.
3. Manual Mode (Slope Mode): To use the device at an angle, lock the pendulum by sliding the main switch to the "OFF" position while the device is on. The laser lines will remain active but will not self-level, allowing for angled projections.
4. Switching Laser Lines: Press the dedicated buttons on the control panel to cycle through horizontal and vertical laser lines independently.
5. Darbe Modu: Activate pulse mode for use with a laser detector in bright outdoor conditions. Refer to the device's specific button for pulse mode activation.
6. Kapat: Slide the main switch to the "OFF" position to lock the pendulum and power off the device.

Image: The laser level in operation, projecting a horizontal line and two vertical lines, creating a 90-degree cross-section on the wall and floor.

6. Bakım

• Temizlik: Keep the laser level clean. Use a soft, damp Dış yüzeyi silmek için bir bez kullanın. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
• Lens Bakımı: Gently clean the laser output windows with a soft, lint-free cloth. Avoid scratching the lenses.
• Depolamak: Store the device in its original carrying case in a dry, dust-free environment when not in use.
• Pil: Cihazda çıkarılabilir piller kullanılıyorsa, sızıntıyı önlemek için uzun süreli saklama sırasında pilleri çıkarın.
• Kalibrasyon: Regular calibration checks are recommended to ensure accuracy, especially after drops or impacts.

7. Sorun Giderme

8. Özellikler

• Modeli: KT360A
• Lazer Sınıfı: Sınıf II, <1mW
• Lazer Rengi: Yeşil
• Lazer Çizgileri: 3 x 360° (1 Yatay, 2 Dikey)
• Kendinden Tesviye Aralığı: ±4°
• Pulse Mode Range: Up to 196ft/60m (with detector, not included)
• Tripod Max Height: 3.7m / 12.18ft
• Adaptör Ayarı: 360° rotation, X/Y axis fine adjustment (within 1 cm)

9. Garanti ve Destek

KAIWEETS provides a 3 yıl satış sonrası servis for the KT360A laser level kit.

For technical support, warranty claims, or any questions regarding your product, please contact KAIWEETS customer service through their official channels or the retailer where the product was purchased.

Please have your model number (KT360A) and purchase information ready when contacting support.