giriiş
This manual provides detailed instructions for the Okin Wireless Remote Replacement Hand Control, model JLDK.18.01.22. This remote is specifically designed for use with electric adjustable beds that utilize the Okin control box JLDP.03.006.000. Please read this manual thoroughly before use to ensure proper operation and longevity of your device.
Güvenlik Bilgileri
- Ensure the control box is compatible with this remote model (JLDP.03.006.000).
- Uzaktan kumandayı sudan ve aşırı nemden uzak tutun.
- Do not attempt to disassemble or repair the remote control yourself. Contact qualified personnel for service.
- Use only AAA batteries. Do not mix old and new batteries, or different types of batteries.
- Kullanılmış pilleri yerel düzenlemelere göre atın.
Paket İçeriği
- 1 x Okin Wireless Remote Control (Model: JLDK.18.01.22)
- Note: 3 AAA batteries are required and not included.
Ürün Bittiview
Ön view of the Okin wireless remote control, displaying all function buttons including head and foot adjustments, flat position, massage, and timer settings.
Geri view of the Okin wireless remote control with the battery compartment open, illustrating the placement for three AAA batteries.
The Okin wireless remote features a streamlined design with clearly labeled buttons for intuitive control of your adjustable bed. It includes dedicated buttons for head and foot adjustments, a flat position, massage functions, and a timer. The back of the remote houses the battery compartment.
Kurmak
1. Pil Kurulumu
- Uzaktan kumandanın arkasındaki pil bölmesini bulun.
- Pil kapağını kaydırarak açın.
- 3 adet AAA pili, kutupların doğru olmasına dikkat ederek (+/-) takın.
- Pil kapağını sıkıca kapatın.
2. Pairing Instructions (How to Match Code)
To ensure your remote control communicates correctly with your adjustable bed, it must be paired with the Okin control box JLDP.03.006.000. Follow these steps:
- Adım 1: Gücü Açın. Plug in your adjustable bed to a power outlet. The power indicator light on the control box should illuminate.
- Step 2: Initiate Pairing. On the remote control, simultaneously press and hold the "up" arrow buttons for both KAFA Ve AYAK.
- Step 3: Observe Indicator Lights. The indicator lights on the remote control will begin to flash. Continue holding the buttons until the lights stop flashing.
- Step 4: Release Buttons. Once the lights stop flashing, release both buttons. The pairing process is complete.
For a visual guide on the pairing process, please refer to the image and video below:
Visual guide for pairing the Okin wireless remote control with the adjustable bed's control box.
Official video demonstrating the pairing process for the Okin Wireless Remote Control JLDK.18.01.22 with the adjustable bed system. This video shows how to connect the power, identify the control box, and perform the button sequence for successful pairing.
Kullanım Talimatları
Once paired, your remote control is ready for use. The dual actuators allow independent control of the head and foot sections of your adjustable bed.
| Düğme | İşlev |
|---|---|
| HEAD Up/Down Arrows | Yatağın baş kısmını yukarı veya aşağı doğru ayarlar. |
| FOOT Up/Down Arrows | Yatağın ayak kısmını yukarı veya aşağı doğru ayarlar. |
| DÜZ | Returns both the head and foot sections to a completely flat position. |
| MASSAGE (10min, 20min, 30min) | Activates the massage function for the selected duration (10, 20, or 30 minutes). |
| ZAMANLAYICI / TÜMÜ KAPALI | Cycles through massage timer settings or turns off all active functions, including massage. |
| Memory Positions (3 buttons) | Allows you to save and recall up to 3 preferred bed positions. Consult your bed's manual for saving positions. |
The remote control boasts a response time of less than 0.2 seconds and has been tested for over 160,000 clicks, ensuring reliable performance.
Bakım
- Temizlik: Uzaktan kumandayı yumuşak, kuru bir bezle silin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
- Pil Değişimi: Replace batteries when the remote's indicator lights dim or it becomes unresponsive. Always replace all three AAA batteries at the same time.
- Depolamak: Kumandayı uzun süre saklayacaksanız, sızıntıyı önlemek için pilleri çıkarın.
Sorun giderme
| Sorun | Çözüm |
|---|---|
| Uzaktan kumanda yanıt vermiyor. |
|
| Remote indicator lights not flashing during pairing. |
|
| Bed functions are erratic or unresponsive after pairing. |
|
Özellikler
- Modeli: JLDK.18.01.22
- Uyumluluk: Okin Control Box JLDP.03.006.000
- Güç Kaynağı: 3 x AAA Piller (dahil değildir)
- Yanıt Süresi: 0.2 saniyeden az
- Dayanıklılık: Tested for over 160,000 clicks
- Malzeme: High-quality ABS with silicone buttons
- Boyutlar: Yaklaşık 15 x 4 x 1 inç
- Ağırlık: Yaklaşık 3.52 ons
Garanti ve Destek
Okin is committed to providing high-quality products and excellent customer service. Your Okin Wireless Remote Control is designed for durability and reliable performance.
If you encounter any issues or have questions regarding your remote control, please do not hesitate to contact our customer support team. We aim to respond promptly and provide solutions within 24 hours.
Destek için lütfen satın alma işleminizle birlikte verilen iletişim bilgilerine bakın veya resmi Okin web sitesini ziyaret edin. webalan.
