PowerSmart 42V 2A Charger for 36V Batteries User Manual

1. Giriş

This manual provides essential information for the safe and efficient use of your PowerSmart 42V 2A charger. This charger is specifically designed for 36V batteries equipped with a 5-pin SVD plastic connector, commonly found in Phylion and Joycube battery systems. Please read these instructions carefully before operating the charger to ensure proper function and to prevent damage or injury.

2. Önemli Güvenlik Talimatları

• Tüm talimatları okuyunuz: Şarj cihazını kullanmadan önce şarj cihazı, pil ve pili kullanan ürün üzerindeki tüm talimatları ve uyarı işaretlerini okuyun.
• İç mekan kullanımı sadece: Şarj cihazını yağmur veya ıslak koşullara maruz bırakmayın. Sadece iç mekan kullanımı için tasarlanmıştır.
• uygun cilttage: Ensure the charger is connected to a power supply within the specified input voltage range (100V-240V AC).
• Correct connector: This charger is only compatible with 36V batteries that have a 5-pin plastic SVD connector. Do not attempt to use it with metal connectors or other pin configurations.
• Kısa devrelerden kaçının: Do not short-circuit the output terminals.
• Havalandırma: Şarj işlemi sırasında şarj cihazının çevresinde yeterli havalandırma olduğundan emin olun. Şarj cihazının üzerini örtmeyin.
• Kullanılmadığı zaman fişini çekin: Şarj cihazını kullanılmadığı zamanlarda veya temizlemeden önce elektrik prizinden çıkarın.
• Hasarlı parçalar: Do not operate the charger if it has been dropped, damaged, or if the cord or plug is damaged. Contact customer support for assistance.
• Çocuklar ve evcil hayvanlar: Şarj cihazını çocukların ve evcil hayvanların erişemeyeceği bir yerde saklayın.

3. Ürün Özellikleri

• Uyumluluk: Specifically designed for 36V batteries with a 5-pin plastic SVD connector.
• Giriş Voltage: 100V-240V AC, 50/60Hz.
• Çıkış Hacmitage: 42VDC.
• Çıkış Akımı: 2.0A.
• Güç Çıkışı: 84W.
• Bağlantı Tipi: 5-pin circular plastic plug.
• LED Göstergesi: Red for charging, Green for fully charged or disconnected.

4. Setup and Connector Verification

Before connecting the charger, it is crucial to verify that your battery's charging port is compatible with the 5-pin plastic SVD connector. This charger is not compatible with metal plugs or other pin configurations.

Image: Ensure your battery has a plastic 5-pin DC socket, not a metal one.

The charger features a 5-pin circular plastic connector. Please compare it carefully with your battery's charging port.

Image: PowerSmart 42V 2A charger with its 5-pin plastic connector.

This charger is specifically designed for Phylion and Joycube 36V batteries that utilize this specific 5-pin SVD plastic connector.

Image: Correct connection of the 5-pin charger plug.

Not: This charger is not compatible with NEOMOUV brand bikes fitted with Greenway 36V batteries, nor can it replace chargers with model numbers SHC-8100LC, STC-8129LC, and LBC100201.

5. Operating Instructions (Charging Process)

1. Aküye Bağlan: First, connect the 5-pin charger plug securely into the charging port of your 36V battery.
2. Güce Bağlanın: Plug the charger's AC power cord into a standard 100V-240V wall outlet.
3. Monitör LED Göstergesi:
   • A KIRMIZI LED light indicates that the battery is currently charging.
   • A YEŞİL LED light indicates that the battery is fully charged or the charger is disconnected from the battery.
4. Şarj Süresi: Charging time will vary depending on the battery's capacity and its current charge level.
5. Bağlantıyı kes: Once the LED indicator turns green, the battery is fully charged. Disconnect the charger from the wall outlet first, then disconnect the charger plug from the battery.

Cilt ile ilgili Önemli Nottage: The charger's output voltage (42V) is intentionally higher than the battery's nominal voltage (36V). This is normal and necessary for a complete charge cycle. Do not be alarmed by this difference.

Image: Charger output voltage pil hacminden daha yüksektage for full charge.

6. Bakım

• Temizlik: Disconnect the charger from the power supply and battery before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Depolamak: Şarj cihazını kullanılmadığı zamanlarda serin ve kuru bir yerde saklayın. Aşırı sıcaklık ve nemden kaçının.
• Kablo Bakımı: Do not pull the cable forcefully or wrap it too tightly around the charger. Inspect the cable and plug regularly for any signs of damage.

7. Sorun Giderme

If the charger is not functioning as expected, please check the following:

• LED ışık yok:
  • Şarj cihazının çalışan bir duvar prizine güvenli bir şekilde takılı olduğundan emin olun.
  • Verify the battery is properly connected to the charger.
  • Duvar prizinin çalışıp çalışmadığını başka bir cihaz takarak kontrol edin.
• LED remains green when connected to battery:
  • Pil zaten tamamen şarj edilmiş olabilir.
  • Ensure the battery's charging port and the charger's plug are clean and free of debris.
  • Confirm that the battery is a 36V battery with a 5-pin plastic SVD connector.
• Charger gets warm during use:
  • It is normal for the charger to become warm during operation. Ensure it has adequate ventilation and is not covered.
  • If the charger becomes excessively hot or emits smoke/unusual odors, immediately disconnect it from power and battery and cease use.

If these steps do not resolve the issue, please contact PowerSmart customer support.

8. Özellikler

Image: Charger label with detailed specifications.

9. Garanti ve Destek

For warranty information or technical support, please refer to the documentation included with your purchase or contact PowerSmart customer service directly. Please have your product model number (42V 2A or SSLC084V42M-01) and purchase details available when contacting support.

Manufacturer: PowerSmart
Address: ID, 6F, Ren Road, Donggang Town, Xichen District, Wuxi City, Jiangsu P.R. China