ABB AD1NO-R-15m Modular Device Switch User Manual

1. Giriş

The ABB AD1NO-R-15m is an analog time switch designed for daily scheduling with a 15-minute switching interval. This modular device features one normally open (NO) channel and includes a power reserve function to maintain timekeeping during power outages. It is suitable for various electrical scheduling applications.

Şekil 1: Ön view of the ABB AD1NO-R-15m Modular Device Switch, highlighting its compact design and control interface.

2. Önemli Güvenlik Talimatları

Please read and understand all safety instructions before installing, operating, or maintaining this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Montaj ve bakım işlemleri yalnızca yetkili personel tarafından yapılmalıdır.
• Disconnect power before installation, maintenance, or servicing to prevent electric shock.
• Tüm kablolamanın yerel ve ulusal elektrik yönetmeliklerine ve kurallarına uygun olduğundan emin olun.
• Cihazın hasarlı olduğu görülüyorsa cihazı çalıştırmayın.
• This device is designed for indoor use in dry environments.

3. Ürün Bittiview

The AD1NO-R-15m is an analog time switch with the following key features:

• Analog Kadran: For setting daily schedules.
• 15-Minute Switching: Allows precise control over connected circuits with 15-minute intervals.
• 1 Normally Open (NO) Channel: Bir elektrik devresini kontrol eder.
• Güç Rezervi: Maintains timekeeping for a specified duration during power interruptions.
• Modüler Tasarım: Suitable for integration into standard electrical panels on a DIN rail.

Note: The power reserve ensures the timer continues to function accurately even if the main power supply is temporarily lost.

4. Kurulum ve Kurulum

Follow these steps for proper installation of the AD1NO-R-15m Modular Device Switch:

1. Güç Bağlantısının Kesilmesi: Before beginning, ensure the main power supply to the installation area is completely disconnected at the circuit breaker or fuse box. Verify with a voltage test cihazı.
2. Montaj: Mount the AD1NO-R-15m switch onto a standard DIN rail within an appropriate electrical enclosure. Ensure it is securely fastened.
3. Kablolama:
   • Connect the incoming phase (L) and neutral (N) wires to the designated input terminals of the time switch.
   • Connect the load wire from the output terminal of the time switch to the device you wish to control.
   • Ensure all connections are tight and secure. Refer to the wiring diagram printed on the device for specific terminal identification.
4. Güç Restorasyonu: Once all connections are verified and secure, close the electrical enclosure and restore power to the circuit.

Always consult a qualified electrician for installation if you are unsure or lack experience with electrical wiring.

5. Kullanım Talimatları

To set the time and program the switching schedule:

1. Geçerli Saati Ayarlayın: Rotate the analog dial clockwise until the current time aligns precisely with the reference arrow or marker on the device's face.
2. Program Switching Times: The dial features small segments around its perimeter. Push in the segments corresponding to the times you want the connected circuit to be ON. Pull out segments for OFF periods. Each segment typically represents a 15-minute interval.
3. Operating Mode (if applicable): If your model includes a manual override switch (e.g., ON, AUTO, OFF), ensure it is set to "AUTO" for programmed operation.

The internal power reserve will automatically charge when the device is powered, ensuring continued accurate timekeeping during short power outagee.

6. Bakım

The AD1NO-R-15m is designed for minimal maintenance. Follow these guidelines to ensure optimal performance:

• Temizlik: Keep the device clean and free from dust. Use a dry, soft cloth for cleaning. Do not use liquid cleaners, abrasive materials, or solvents.
• Denetleme: Periodically inspect the wiring connections for tightness and any signs of wear, corrosion, or damage. Ensure all terminals are secure.
• Çevresel Koşullar: Hasarı önlemek için çalışma ortamının belirtilen sıcaklık ve nem aralıklarında kalmasını sağlayın.

There are no user-serviceable parts inside this device. Do not attempt to open the casing, as this will void the warranty and may expose you to electrical hazards.

7. Sorun Giderme

If you encounter issues with your AD1NO-R-15m switch, refer to the table below for common problems and solutions:

If the problem persists after attempting these solutions, please contact ABB customer support for further assistance.

8. Teknik Özellikler

• Modeli: AD1NO-R-15m
• Parça Numarası: 2CSM222461R1000
• Üretici: İNCİR
• Tip: Analog Zaman Anahtarı
• Switching Interval: 15 dakikadır.
• Kanallar: 1 Normalde Açık (HAYIR)
• Güç Rezervi: Evet
• Ürün Ağırlığı: Yaklaşık 2.82 ons (80 gram)
• Ürün Ölçüleri: Yaklaşık 3.54 x 0.69 x 2.6 inç (90 x 17.5 x 66 mm)
• Montaj Tipi: DIN Rail (Wall Mount)
• Dahil Bileşenler: Modular device switch
• Gerekli Piller: No (features internal power reserve)
• ASIN: B09BP4PFMF
• İlk Mevcut: 21 Aralık 2024

Not: Teknik özellikler önceden haber verilmeksizin değiştirilebilir.

9. Garanti ve Destek

Garanti Bilgileri

For detailed warranty terms and conditions, please refer to the official ABB warranty statement provided with your purchase or visit the official ABB webSite. Satın alma belgenizi garanti talepleriniz için saklayın.

Müşteri Desteği

For technical assistance, troubleshooting, or service inquiries, please contact ABB customer support through their official website veya ürün ambalajınızda yer alan iletişim bilgileri.

ABB Resmi Webalan: www.abb.com