Antari MB-1

Antari MB-1 Mobil Sis Makinesi Kullanım Kılavuzu

Model: MB-1

giriiş

This manual provides comprehensive instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of your Antari MB-1 Mobile Fog Machine. Please read this manual thoroughly before using the device to ensure proper function and to prevent damage or injury.

Antari MB-1 Mobile Fog Machine, front-side view

Image: The Antari MB-1 Mobile Fog Machine, a compact, black unit with a handle on top and the "Mobile MB-1 Fogger" logo on its side.

Önemli Güvenlik Bilgileri

UYARI: Bu güvenlik talimatlarına uyulmaması yangına, elektrik çarpmasına, yaralanmaya veya ürünün ya da mülkün hasar görmesine neden olabilir.

Paket İçeriği

Carefully unpack your Antari MB-1 Mobile Fog Machine and check that all items listed below are present and in good condition. If any items are missing or damaged, contact your retailer immediately.

Antari MB-1 Kit contents including fog machine, case, battery, charger, and fog fluid

Image: The Antari MB-1 Kit showing all included components: (1) MB-1 Fog Machine, (2) Carrying Case, (3) Rechargeable Battery, (4) Charger, and (5) Bottle of 500cc FLM-05S Fog Fluid.

  1. Antari MB-1 Mobil Sis Makinası
  2. Taşıma Çantası
  3. Şarj edilebilir pil
  4. Pil Şarj Cihazı
  5. Antari FLM-05S Fog Fluid (500cc bottle)

Kurmak

1. Pilin Şarj Edilmesi

Before first use, fully charge the rechargeable battery using the provided charger. Connect the charger to the battery and then to a suitable power outlet. The charging indicator on the charger will show the charging status. A full charge typically takes several hours.

2. Pilin Takılması

Locate the battery compartment on the Antari MB-1. Insert the fully charged battery, ensuring proper polarity. Close the compartment securely.

3. Filling the Fluid Tank

  1. Unscrew the cap of the fluid tank located on top of the machine.
  2. Carefully pour Antari FLM-05S Fog Fluid into the tank. Do not overfill.
  3. Securely screw the cap back onto the fluid tank.
Taraf view of Antari MB-1 Mobile Fog Machine showing fluid tank cap and control port

Resim: Yakın çekim bir taraf view of the Antari MB-1, highlighting the fluid tank cap on the left and a control port on the right side of the unit.

Kullanım Talimatları

1. Açma

Press and hold the power button located on the handle of the machine. The indicator light will illuminate, signifying the machine is warming up. This process may take a few minutes.

Close-up of Antari MB-1 handle with power button

Resim: Ayrıntılı view of the Antari MB-1's handle, showing the red power button positioned on top.

2. Generating Fog

Once the machine has warmed up (indicator light stable), press the fog button (often integrated with the power button or a separate trigger) to emit fog. The MB-1 is designed for momentary fog bursts. Release the button to stop fog production.

3. Output Control (if applicable)

Some models may feature adjustable output settings (e.g., low/high output). Refer to the markings on your specific unit for details on how to select different fog output levels.

4. Kapatma

Press and hold the power button until the indicator light turns off. It is recommended to run the machine until the fluid tank is empty or nearly empty before prolonged storage to prevent fluid residue buildup.

Bakım

1. Cleaning the Fluid Tank

Periodically, or before storing the machine for an extended period, empty any remaining fog fluid from the tank. You may rinse the tank with distilled water, but ensure it is completely dry before refilling or storing.

2. Nozul Temizliği

If the fog output appears weak or inconsistent, the nozzle may be partially clogged. Consult a qualified technician for cleaning or replacement of the nozzle. Do not attempt to clear clogs with sharp objects.

3. Pil Bakımı

To prolong battery life, avoid fully discharging the battery frequently. Store the battery in a cool, dry place and recharge it periodically if not in use for a long time.

4. Depolama

Store the Antari MB-1 in its carrying case in a dry, dust-free environment, away from extreme temperatures. Ensure the fluid tank is empty or contains fresh, approved fog fluid.

Sorun giderme

SorunOlası NedenÇözüm
Sis çıkışı yok
  • Machine not warmed up
  • Fluid tank empty
  • Pil şarj edilmemiş veya takılmamış
  • meme tıkalı
  • Isınma göstergesini bekleyin.
  • Refill with Antari FLM-05S fluid
  • Charge and install battery correctly
  • Contact service for nozzle cleaning
Zayıf sis çıkışı
  • Düşük sıvı seviyesi
  • Kısmen tıkalı nozul
  • Düşük pil şarjı
  • Doldurma sıvısı
  • Contact service for nozzle cleaning
  • Aküyü şarj edin
Makine açılmıyor
  • Pil takılı değil veya bitmiş
  • Arızalı güç düğmesi
  • Check battery installation and charge
  • Contact Antari support

Özellikler

Garanti Bilgileri

Antari products are manufactured to the highest quality standards. This product is covered by a limited warranty against manufacturing defects. Please refer to the warranty card included with your product or visit the official Antari webAyrıntılı garanti şartları ve koşulları için web sitemizi ziyaret edin. Satın alma belgenizi garanti talepleriniz için saklayın.

Müşteri Desteği

For technical assistance, service, or replacement parts, please contact your authorized Antari dealer or visit the official Antari webDestek kaynakları ve iletişim bilgileri için site.

Webalan: www.antari.com (Örnamp(bağlantı, gerçek bağlantı değişiklik gösterebilir)

İlgili Belgeler - MB-1

Önview Antari MB-1 Mobil Sis Makinesi Kullanım Kılavuzu ve Rehberi
Antari MB-1 Mobil Sis Makinesi için kurulum, kullanım, güvenlik, bakım ve teknik özellikleri kapsayan kapsamlı kullanım kılavuzu. MB-1 sisleme makinenizi nasıl etkili bir şekilde kullanacağınızı öğrenin.
Önview Antari FT-200 Yangın Eğitim Sis Makinesi Kullanım Kılavuzu
Antari FT-200 Yangın Eğitim Sis Makinesi için kapsamlı kullanıcı kılavuzu. Bu kılavuz, temel güvenlik bilgilerini, ambalajın açılmasını ve incelenmesini, ürünün genel durumunu ve kullanım kılavuzunu kapsar.view, kurulum talimatları, detaylı çalışma modları (zamanlayıcı, ses, DMX, kablosuz), kontrol paneli fonksiyonları, menü ayarları, akışkan önerileri, bakım prosedürleri, kesici sıfırlama ve teknik özellikler.
Önview Antari FT-100 Yangın Eğitim Sis Makinesi Kullanım Kılavuzu
Antari FT-100 Yangın Eğitim Sis Makinesi için kurulum, çalıştırma, güvenlik önlemleri, bakım ve teknik özelliklerin ayrıntılı olarak açıklandığı kapsamlı kullanıcı kılavuzu. Yangın eğitim simülasyonları için olmazsa olmazdır.
Önview Antari Fog Sıvısı (FLM-05S) Güvenlik Bilgi Formu
Antari Fog Sıvısı (FLM-05S) için kapsamlı Güvenlik Bilgi Formu, ürün tanımlamasını, tehlike sınıflandırmasını, bileşimini, güvenli kullanımını, depolamayı, maruz kalma kontrollerini, toksikolojik ve ekolojik bilgileri, bertarafını ve yasal uyumluluğunu ayrıntılı olarak açıklamaktadır.
Önview Antari FT-70 Yangın Eğitim Sis Makinesi Kullanım Kılavuzu
Antari FT-70 Yangın Eğitim Sis Makinesi için güvenlik, kullanım, bakım, teknik özellikler ve sorun giderme konularını kapsayan kapsamlı kullanım kılavuzu. Kablosuz uzaktan kumanda ve topraklama talimatları hakkında ayrıntılar da içerir.
Önview Antari FT-55 Duman Jeneratörü Kullanım Kılavuzu - Çalıştırma, Güvenlik ve Özellikler
Antari FT-55 Pompasız Şebeke Dışı Duman Jeneratörü için kapsamlı kullanım kılavuzu. Güvenlik, kullanım, bakım, teknik özellikler ve yedek parçaları kapsar.