1. Giriş
The Orbit 6-zone indoor sprinkler controller is designed to provide convenient and flexible control over your lawn or garden watering schedule. Its user-friendly interface simplifies setup and customization, offering features such as rain delay, water budgeting, and dual watering programs to meet specific irrigation needs.
This manual provides detailed instructions for the installation, operation, and maintenance of your Orbit Easy Dial Sprinkler Controller.
Temel Özellikler:
- Flexible Watering Options: Set water duration for each station between 1-240 minutes.
- Efficient Watering Schedule: Up to 8 start times per day to reduce water runoff.
- Rain Delay Feature: Pause watering for 24, 48, or 72 hours.
- Su Bütçelemesi: Adjust run times based on seasonal changes.
- Dual Watering Programs: Independent programs for customized intervals, days of the week, or even/odd watering days.
Şekil 1.1: Ön view of the Orbit Easy Dial 6-Station Indoor Sprinkler Controller, showing the LCD display, control buttons, and rotary dial.
2. Güvenlik Bilgileri
Please read all safety information before installing or operating the controller. Failure to follow these instructions could result in injury or property damage.
- This controller is designed for sadece iç mekanda kullanılabilirDış mekanlara veya suya maruz kalan alanlara monte etmeyin.
- Herhangi bir kablolama veya bakım işlemi yapmadan önce güç kaynağının bağlantısının kesildiğinden emin olun.
- All electrical connections should be made in accordance with local electrical codes.
- Cihazı kendiniz tamir etmeye çalışmayın. Tüm servis işlemlerini yetkili personele yaptırın.
3. Kurulum ve Kurulum
3.1 Kontrolörün Montajı
Choose a suitable indoor location near a standard 120V AC electrical outlet. Avoid areas with extreme temperatures or direct sunlight.
- Duvara istediğiniz montaj yerini işaretleyin.
- Install two mounting screws (not included) into the wall, leaving approximately 1/8 inch (3 mm) of the screw head exposed. The screws should be spaced vertically to align with the keyhole slots on the back of the controller.
- Hang the controller on the screws.
Şekil 3.1: Ör.ample of the controller mounted on a wall in an indoor setting.
3.2 Kontrol Cihazının Kablolaması
Before wiring, ensure the power adapter is unplugged from the electrical outlet.
- Common Wire (COM): Connect the common wire from your sprinkler valves to the terminal labeled 'COM' on the controller. This is typically a white wire.
- Zone Wires (1-6): Connect each individual zone wire from your sprinkler valves to the corresponding numbered terminals (1 through 6) on the controller.
- Rain Sensor (Optional): If using a rain sensor (sold separately), connect its wires to the 'SENSOR' terminals. Ensure the rain sensor switch inside the controller is set to 'ON' if a sensor is connected. If no sensor is used, keep the switch 'OFF' and ensure the jumper wire is in place between the sensor terminals.
- Güç Bağlantısı: Plug the included 24V AC transformer into the '24VAC' terminals on the controller. Then, plug the transformer into a standard 120V AC electrical outlet.
Şekil 3.2: Ayrıntılı view of the wiring terminals, showing connections for 24VAC, SENSOR, COM, and zones 1-6.
4. Kullanım Talimatları
The Orbit Easy Dial controller features a rotary dial for selecting functions and a set of buttons for adjusting settings.
Şekil 4.1: Kontrol paneliview, highlighting the LCD display, directional buttons, and function dial.
4.1 Setting Current Time and Date
- kadranı çevirin TARİH/SAAT.
- Kullanın + Ve - buttons to set the current year, then press GİRMEK.
- Repeat for month, day, hour, and minute.
4.2 Programming Watering Schedules (Programs A & B)
The controller supports two independent programs (A and B) for different watering needs.
4.2.1 Setting Start Times
- kadranı çevirin BAŞLANGIÇ ZAMANI.
- The display will show '1'. Use + Ve - to set the first start time, then press GİRMEK.
- Continue setting up to 8 start times for the current program. To skip a start time, press GİRMEK without setting a time.
- To switch between Program A and B, press the PROGRAM A-B düğme.
4.2.2 Setting Run Times (How Long)
- kadranı çevirin NE KADARDIR.
- The display will show 'STATION 1'. Use + Ve - to set the watering duration (1-240 minutes) for Station 1, then press GİRMEK.
- Repeat for each station (1-6).
- To switch between Program A and B, press the PROGRAM A-B düğme.
4.2.3 Setting Watering Days (How Often)
- kadranı çevirin NE SIKLIKTA.
- Üç seçenekten birini seçebilirsiniz:
- Haftanın Günleri: Kullanın SAĞ OK button to move to the desired day, then press GİRMEK to select/deselect.
- Aralıklar: Kullanmak + Ve - to set the interval (e.g., every 2 days).
- Even/Odd Days: Select 'EVEN' or 'ODD' for watering on even or odd calendar days.
- To switch between Program A and B, press the PROGRAM A-B düğme.
4.3 Yağmur Gecikmesi Özelliği
The rain delay feature allows you to temporarily suspend your watering schedule for a set period.
- kadranı çevirin OTOMATİK.
- Basın YAĞMUR GECİKMESİ düğme.
- Kullanın + Ve - buttons to select a delay of 24, 48, or 72 hours.
- The controller will automatically resume the schedule after the delay period. To cancel, press TEMİZLEMEK.
4.4 Water Budgeting
The water budgeting feature allows you to adjust all programmed run times by a percentage, useful for seasonal adjustments without reprogramming each station.
- kadranı çevirin BÜTÇE.
- Kullanın + Ve - buttons to adjust the percentage (e.g., 50% to reduce watering by half, 150% to increase by 50%).
- The change applies to all active programs and stations.
4.5 Manuel Çalıştırma
To manually water a specific station or all stations:
- kadranı çevirin OTOMATİK.
- Basın KILAVUZ düğme.
- Kullanın SAĞ OK or SOL OK buttons to select the desired station or 'ALL' for all stations.
- Basmak GİRMEK.
- Kullanmak + Ve - to set the manual run time.
- Basmak GİRMEK Manuel sulamayı başlatmak için.
- Manuel sulamayı durdurmak için basın. TEMİZLEMEK.
4.6 Turning Off the Controller
To stop all automatic watering, turn the dial to KAPALI. The controller will retain its programming.
5. Bakım
- Kumanda ünitesini temiz tutun ve tozdan ve kirden arındırın. Temizlik için yumuşak, kuru bir bez kullanın.
- Ensure the controller is not exposed to moisture or direct water spray.
- Kablo bağlantılarının güvenli olduğundan emin olmak için düzenli olarak kontrol edin.
- During winter months in cold climates, it is recommended to disconnect the controller and store it indoors to prevent damage from freezing temperatures.
6. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Display is blank or no power. | No power to the outlet; faulty transformer; loose wiring. | Check outlet with another device. Ensure transformer is securely plugged into controller and outlet. Verify 24VAC wiring. |
| Sprinklers do not turn on. | Controller is OFF; rain delay active; wiring issue; valve problem. | Turn dial to AUTO. Check if rain delay is active. Verify common and zone wiring. Manually test valves at the valve box. |
| Only some zones water. | Loose zone wire; faulty valve for specific zone. | Check wiring for the non-working zones. Test the specific valve manually. |
| Controller waters at wrong times. | Incorrect time/date; incorrect program settings. | Verify current time and date. Review start times, run times, and watering days for all programs (A and B). |
| Watering duration is too short/long. | Incorrect run times; water budgeting active. | Check run times for each station. Verify water budgeting percentage. |
7. Özellikler
| Özellik | Detay |
|---|---|
| Model Numarası | 28966 |
| Bölge Sayısı | 6 |
| Güç Girişi | 120V ac, 60Hz |
| Güç Çıkışı | 24V AC |
| Çalışma Sıcaklığı | 68 Fahrenheit derece (20 Santigrat derece) |
| Ürün Boyutları | 8 x 6.75 x 2 inç (20.3 x 17.1 x 5.1 cm) |
| Ürün Ağırlığı | 1.3 pound (0.59 kg) |
| Görüntü Türü | LCD |
| UPC | 046878289666 |
8. Garanti ve Destek
For specific warranty information and detailed support, please refer to the official Orbit website or contact Orbit customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.
Orbit is a leading provider of watering solutions, committed to delivering quality products and customer satisfaction.
You can visit the official Orbit store for more information and product support: Orbit Mağazası Amazon'da
