Midea Su Sebili MYL712S-B Kullanım Kılavuzu

giriiş

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your Midea Water Dispenser Model MYL712S-B. Please read this manual thoroughly before using the appliance and retain it for future reference.

The Midea MYL712S-B is a floor-standing water dispenser offering hot, cold, and normal temperature water, featuring a 3-push button faucet and an integrated 15-liter small refrigerator compartment.

Güvenlik Talimatları

To prevent personal injury or property damage, observe the following safety precautions:

• Ensure the dispenser is connected to a grounded power outlet (220V/60Hz).
• Dağıtıcıyı, kablosunu veya fişini suya veya başka sıvılara batırmayın.
• Dispenseri doğrudan güneş ışığından ve ısı kaynaklarından uzak tutunuz.
• Hasarlı bir kablo veya fiş ile dağıtıcıyı çalıştırmayın.
• Temizlik veya bakım işlemlerine başlamadan önce dağıtıcının fişini çekin.
• Supervise children when they are near the appliance. The hot water faucet has a safety lock.
• Cihazın havalandırma deliklerini kapatmayın.
• Only use bottled water suitable for water dispensers.
• Bu cihazda yanıcı itici gaz içeren aerosol kutuları gibi patlayıcı maddeler saklamayın.

Ürün Bittiview

Midea su sebiliinizin bileşenlerini yakından tanıyın.

Şekil 1: Ön view of the Midea MYL712S-B Water Dispenser. This image shows the dispenser in its upright, floor-standing position. The upper section contains the water bottle receptacle, the three push-button faucets for hot, cold, and normal water, and the drip tray. Below the dispenser section, a small refrigerator compartment is visible, indicated by the word "REFRIGERATOR" in blue lettering.

Temel Bileşenler:

• Su Şişesi Kabı: Located at the top, designed to hold standard water bottles.
• Push-Button Faucets: Three distinct buttons for dispensing hot, cold, and normal temperature water.
• Damlama tepsisi: Dökülen suyu toplar, kolay temizlik için çıkarılabilir.
• Gösterge Işıkları: Display power status, heating, and cooling operations.
• Buzdolabı Bölmesi: A 15-liter storage space at the bottom for cooling beverages or small items.
• Güç Kablosu: Elektrik prizine bağlanmak için.

Kurulum ve Yükleme

1. Paketin açılması: Dispenseri ambalajından dikkatlice çıkarın. Herhangi bir hasar olup olmadığını kontrol edin.
2. Atama: Dağıtıcıyı iyi havalandırılan, doğrudan güneş ışığından ve ısı kaynaklarından uzak, düz ve sabit bir yüzeye yerleştirin. Uygun havalandırma için duvarlardan en az 10 cm (4 inç) boşluk olduğundan emin olun.
3. İlk Temizlik: Before first use, clean the drip tray and water tank (if accessible) with mild soap and water. Rinse thoroughly.
4. Su Şişesi Montajı:
   • Remove the protective seal from a new water bottle.
   • Carefully invert the water bottle and place it firmly onto the water bottle receptacle at the top of the dispenser. Ensure it is seated correctly to prevent leaks.
5. Güç Bağlantısı: Güç kablosunu topraklı 220V/60Hz elektrik prizine takın.
6. İlk Su Akışı: Before turning on heating or cooling, dispense at least 1 liter of water from each faucet (hot, cold, normal) to ensure the tanks are filled and air is purged from the system. This prevents damage to heating elements.

Kullanım Talimatları

Su Dağıtımı:

• Soğuk Su: Press the blue button. The cold water indicator light will illuminate when cooling is active.
• Sıcak Su: Press the red button. For safety, the hot water faucet typically has a child-safety lock. Push the safety lock forward or backward (depending on design) and then press the red button. The hot water indicator light will illuminate when heating is active.
• Normal Temperature Water: Press the green or uncolored button (if applicable). This water is dispensed at room temperature.

Allow approximately 15-30 minutes for the water to reach desired hot or cold temperatures after initial setup or refilling.

Using the Refrigerator Compartment:

The lower compartment functions as a small refrigerator. Open the door to store beverages or small food items. This compartment is not designed for freezing or long-term storage of perishable goods.

Bakım ve Temizlik

Düzenli temizlik, optimum performans ve hijyen sağlar.

1. Dış Temizlik: Dış yüzeyleri yumuşak, damp bezle silin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
2. Damlama tepsisi: Remove and empty the drip tray regularly. Wash it with mild soap and water, then rinse and dry thoroughly before replacing.
3. Water Tank (Descaling):
   • Sebili fişten çekin ve su şişesini çıkarın.
   • Drain all water from the hot and cold tanks using the respective faucets.
   • For descaling, a solution of water and white vinegar (e.g., 1 part vinegar to 4 parts water) can be used. Pour the solution into the water bottle receptacle and allow it to sit for 15-30 minutes.
   • Drain the solution completely. Rinse the tanks multiple times by filling with clean water and draining until no vinegar smell remains.
4. Kondansatör Bobinleri: Periodically clean the condenser coils at the back of the dispenser with a soft brush or vacuum cleaner to ensure efficient cooling. Ensure the dispenser is unplugged before cleaning the coils.

Sorun giderme

Özellikler

Garanti ve Destek

For warranty information and customer support, please refer to the warranty card included with your product or contact Midea customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

For further assistance, visit the official Midea websiteyi ziyaret edin veya yetkili servis merkezlerine başvurun.