DALY Smart BMS Li-ion 17S 60V 60A Instruction Manual

1. Ürün Bittiview

The DALY Smart BMS (Battery Management System) is designed for Li-ion 17S 60V 60A battery packs. It features a programmable Bluetooth module and a common port for both charging and discharging. This BMS provides essential protection functions and allows for real-time monitoring and parameter adjustments via a mobile application.

Figure 1: DALY Smart BMS with Bluetooth module and smartphone app interface.

Temel Özellikler:

• Supports up to 60A continuous discharge and 30A charge current. Suitable for high current applications.
• Programmable temperature protection: Stops current if battery temperature limits are exceeded.
• Programmable over-charge and over-discharge protection: Stops charging/discharging when voltage limits are reached.
• Programmable over-current protection: Stops charging/discharging if current exceeds limits.
• Integrated Bluetooth module for mobile app (iOS & Android) connectivity.
• UART cable for PC monitoring and parameter setting.
• SOC (State of Charge) calculation with automatic learning function.
• Automatic battery charge function or static balance function.

Figure 2: The DALY Smart BMS offers 12 protection functions including Bluetooth, programmable settings, over-charging, over-discharging, over-current, short-circuit, over-voltage, balance, NTC temperature, waterproof, moistureproof, fireproof, and dustproof features.

2. Güvenlik Bilgileri

Adherence to safety guidelines is crucial for the proper and safe operation of the DALY Smart BMS. Failure to follow these instructions may result in damage to the product, battery, or personal injury.

• Do not charge the battery pack at temperatures below -1°C.
• Always follow battery management guidelines to prevent over-charge, over-discharge, and voltage dengesizlik
• Keep the BMS and battery pack away from extreme temperatures and humidity.
• Ensure all wiring connections are secure and correct before operation. Incorrect wiring can cause damage.
• Only use the specified balance wires and cables provided with the BMS.
• Consult a qualified professional if you are unsure about any installation or operation steps.

3. Kurulum ve Kurulum

Careful installation is essential for the correct functioning of your DALY Smart BMS. Please follow these steps precisely.

3.1 Kablolama Bağlantısı

1. Hazırlık: Ensure all power sources are disconnected. Tools needed include a soldering machine (suggested 662°F/350°C), scissors, double-sided tape, tin wire, and a multimeter.
2. Balance Wires: Disconnect balance wires from the BMS connection port. Connect the balance wires to your battery pack, ensuring correct polarity and sequence.
3. BMS Bağlantısı: Connect the main negative (B-) and positive (P+) wires from the battery pack to the BMS.
4. Balance Wire Reconnection: After confirming all balance wires are correctly welded and installed, connect them to the BMS connection port.
5. NTC and Bluetooth Module: Plug in the NTC (temperature sensor) and Bluetooth module into their respective ports on the BMS.
6. Etkinleştirme: Press the button on the Bluetooth module to activate the smart BMS.

Figure 3: Wiring diagram showing connections for the DALY Smart BMS, battery pack, charger, and motor/load. Ensure balance wires are connected correctly from the last series to the first series of the battery cells.

3.2 Mobil Uygulama Kurulumu

1. İndir uygulaması: Arama "Smart BMS" in the Huawei App Store or Apple App Store and download the application.
2. Bluetooth ile bağlanın: Open the Smart BMS app and connect to the corresponding Bluetooth device listed.
3. İlk Parametre Ayarı: For the first power-on, the battery capacity must be set to the actual capacity of your battery pack. The initial password for parameter changes is 123456.

4. Kullanım Talimatları

The DALY Smart BMS allows for comprehensive monitoring and control of your battery pack.

4.1 Gerçek Zamanlı İzleme

Use the "Smart BMS" mobile application to monitor battery status in real-time. This includes:

• Şarj Durumu (SOC)
• Akım (şarj/deşarj)
• Cilttage (toplam ve bireysel hücre hacmi)tage)
• Sıcaklık
• Warning and fault messages

Figure 4: Real-time data monitoring via the DALY Smart BMS mobile application, showing SOC, current, voltage ve sıcaklık.

4.2 Parametre Ayarları

The app allows you to adjust various protection parameters to suit your battery type and application. Always ensure you understand the implications of changing these settings.

• hücre hacmitage high/low protection limits.
• toplam hacimtage high/low protection limits.
• Charge/discharge over-current protection limits.
• High/low temperature protection limits for charging and discharging.
• Bakiye başlangıç ​​hacmitage ve diferansiyel hacimtage.

The BMS also supports PC monitoring via the UART cable, providing a detailed interface for advanced users to view ve parametreleri ayarlayın.

5. Bakım

Regular maintenance ensures the longevity and optimal performance of your DALY Smart BMS and battery pack.

• Bağlantı Kontrolleri: Tüm kablo bağlantılarının sıkılığını ve korozyon olup olmadığını periyodik olarak kontrol edin. Gevşek bağlantılar, düşük performansa veya güvenlik tehlikelerine yol açabilir.
• Donanım Yazılımı Güncellemeleri: Check the DALY website or app for any available firmware updates for your BMS model. Updates can improve performance and add new features.
• Çevresel Koşullar: Ensure the BMS is operated within its specified temperature and humidity ranges. Avoid exposure to direct sunlight, water, or excessive dust.
• Temizlik: BMS'yi temiz tutun ve toz ve kirden arındırın. Temizlik için yumuşak, kuru bir bez kullanın. Sıvı temizleyiciler kullanmayın.
• Pil Kalibrasyonu: The BMS features automatic SOC calibration. For accurate readings, ensure the battery is fully charged periodically until the voltage reaches the high protection limit, allowing the BMS to recalibrate.

6. Sorun Giderme

This section addresses common issues you might encounter with your DALY Smart BMS.

7. Özellikler

Detailed technical specifications for the DALY Smart BMS Li-ion 17S 60V 60A.

Figure 5: Physical dimensions and key electrical specifications of the DALY Smart BMS.

8. Garanti ve Destek

For warranty information, technical support, or service inquiries, please refer to the official DALY websitesine bakın veya satıcınızla iletişime geçin.

• Koruma Planları: Optional 2-Year and 3-Year protection plans may be available for purchase. Refer to your purchase documentation for details.
• İade politikasi: A 30-day refund/replacement return policy typically applies. Consult your seller for specific terms.
• Üretici: DALY
• Temas etmek: Daha fazla yardım için şu adresi ziyaret edin: DalyBMS Store on Amazon or the official DALY webalan.