Synology E25G30-F2 2-Port 25GbE SFP28 PCIe Network Adapter Instruction Manual

1. Ürün Bittiview

The Synology E25G30-F2 is a dual-port 25GbE network adapter designed to seamlessly integrate compatible Synology systems into 25GbE networks, enhancing their potential for high-performance storage applications.

Temel Özellikler:

• Two 25GbE ports support high-performance storage applications.
• Enables higher simultaneous throughput, port failover, and load balancing.
• Purpose-built for use with Synology systems.
• 5 yıl garantilidir.
• Requires DSM 7.1.1-42962 Update 5 or above for optimal functionality.

2. Kutuda Neler Var?

• 1 x Synology E25G30-F2 2-Port 25GbE SFP28 PCIe Network Adapter

3. Kurulum ve Kurulum

This section provides general guidance for installing the Synology E25G30-F2 network adapter. For detailed, model-specific instructions, please refer to the official Synology documentation for your NAS model.

Uyumluluk:

• Compatible Devices: Synology Systems.
• Hardware Interface: PCI Express x16.
• Requires DSM 7.1.1-42962 Update 5 or above.

Kurulum Adımları (Genel):

1. Gücü Kapatma ve Bağlantıyı Kesme: Ensure your Synology NAS is completely powered off and disconnected from all power sources and network cables.
2. Access PCIe Slot: Depending on your Synology NAS model, you may need to remove the chassis cover or access a dedicated expansion slot. Consult your NAS's user manual for precise instructions.
3. Ağ Bağdaştırıcısını Takın: Carefully align the E25G30-F2 network adapter with the available PCIe slot and firmly press it down until it is securely seated.
4. Güvenli Bağdaştırıcı: Use the provided screws or retention mechanism to secure the adapter in place.
5. Reassemble and Reconnect: Replace the chassis cover, reconnect power and network cables, and power on your Synology NAS.
6. DSM Configuration: Once the NAS boots up, log into DiskStation Manager (DSM) to configure the new network interfaces.

4. Kullanım Talimatları

After physical installation, the Synology E25G30-F2 network adapter requires configuration within Synology's DiskStation Manager (DSM).

Configuring 25GbE Ports in DSM:

1. DSM'ye erişim: Log into your Synology NAS using a web tarayıcı.
2. Navigate to Network Settings: Git Kontrol Paneli > Ağ > Ağ Arayüzü.
3. Identify New Interfaces: Your newly installed 25GbE ports (e.g., LAN5, LAN6) should appear as new network interfaces.
4. IP Ayarlarını Yapılandır: Select each new interface and click Düzenlemek to configure its IP address, subnet mask, and other network settings according to your network environment. You can choose DHCP or manual configuration.
5. Ayarları Uygula: Save your changes. The 25GbE connection should now be active.

Utilizing 25GbE for Performance:

• Yüksek Performanslı Depolama: Leverage the increased bandwidth for demanding tasks such as large file transfers, virtualization, and high-resolution video editing.
• Bağlantı Toplama: If your network infrastructure supports it, configure link aggregation (LAG) to combine multiple 25GbE ports for even higher throughput and redundancy.
• SSD Önbelleği: Consider implementing SSD cache on your Synology NAS to further accelerate random I/O performance, complementing the high-speed network connection.

5. Bakım

The Synology E25G30-F2 network adapter is designed for reliability and requires minimal maintenance.

• Ürün Yazılımını Güncel Tutun: Regularly update your Synology NAS's DSM to ensure the network adapter has the latest drivers and performance enhancements.
• Çevresel Koşullar: Ensure your NAS operates in a well-ventilated area to prevent overheating, which can affect the performance and lifespan of all internal components, including the network adapter.
• Fiziksel Muayene: Periodically check the network cables for secure connections and signs of damage.

6. Sorun Giderme

If you encounter issues with your Synology E25G30-F2 network adapter, consider the following troubleshooting steps:

• No Link Light/Connection:
  • Verify the network cable is securely connected to both the adapter and your 25GbE switch.
  • Ensure the 25GbE switch port is active and configured correctly.
  • Try a different 25GbE cable.
• Yavaş Performans:
  • Check DSM's Resource Monitor for network utilization to identify bottlenecks.
  • Confirm that your network infrastructure (switch, cables, client devices) supports 25GbE speeds.
  • Ensure DSM and network adapter drivers are up to date.
• Adapter Not Detected in DSM:
  • Power off the NAS, reseat the E25G30-F2 adapter in its PCIe slot, and restart.
  • Verify your Synology NAS model is compatible with the E25G30-F2.
  • Ensure your DSM version meets the minimum requirement (7.1.1-42962 Update 5 or above).

7. Özellikler

8. Garanti ve Destek

Garanti:

The Synology E25G30-F2 network adapter comes with a 5-year warranty.

Destek:

For further assistance, technical support, or to access the latest documentation and compatibility lists, please visit the official Synology website or contact Synology customer support.

9. Ürün Medyası

Resimler:

Şekil 1: Ön view of the Synology E25G30-F2 2-Port 25GbE SFP28 PCIe Network Adapter.

Figure 2: Diagram showing the Synology E25G30-F2 as a dual-port 25GbE add-on card for connectivity upgrades.

Şekil 3: Yakın çekim view of the Synology E25G30-F2 highlighting its two 25GbE SFP28 ports.

Figure 4: The Synology E25G30-F2 network adapter installed in a compatible Synology NAS system.

Videolar: