TASCAM TM-82 Dinamik Mikrofon Kullanım Kılavuzu

1. Giriş

The TASCAM TM-82 is a dynamic microphone engineered for capturing vocals and instruments. Its robust construction and cardioid directivity make it suitable for various live and studio applications, providing clear sound reproduction while minimizing unwanted ambient noise.

The TASCAM TM-82 dynamic microphone is designed for capturing vocals and instruments.

2. Paket İçeriği

Paketin içinde tüm öğelerin mevcut olduğundan emin olun:

• TASCAM TM-82 Dynamic Microphone
• Mikrofon Tutucu

The TM-82 microphone comes with a compatible mic holder for standard microphone stands.

3. Kurulum

1. Attach the Mic Holder: Securely screw the included mic holder onto a standard microphone stand.
2. Mikrofonu Monte Edin: Insert the TASCAM TM-82 microphone into the mic holder. Ensure it is firmly seated.
3. Kabloyu bağlayın: Connect an XLR cable (not included) to the XLR output connector at the base of the microphone. Connect the other end of the XLR cable to your mixer, audio interface, or ampcankurtaran.
4. Güç: The TM-82 is a dynamic microphone and does not require phantom power for operation.

4. Kullanım Talimatları

4.1. Mikrofon Yerleşimi

Optimal microphone placement is crucial for sound quality. Experiment with distance and angle to achieve the desired sound. The TM-82 features a cardioid directivity, meaning it is most sensitive to sound coming from the front and rejects sound from the sides and rear. This helps reduce feedback and isolate the intended sound source.

4.2. For Vocals

Position the microphone 2-6 inches (5-15 cm) from the vocalist's mouth. Adjust the distance to control proximity effect (increased bass response when close to the mic) and prevent plosives (harsh 'p' and 'b' sounds). The cardioid pattern helps minimize stage bleed from other instruments.

The TM-82 is suitable for vocal performances, capturing nuances while minimizing room noise.

4.3. For Instruments

When miking instruments, place the microphone in front of the sound source. For acoustic guitars, aim towards the soundhole or where the neck meets the body for a balanced sound. For guitar amplifiers, position the microphone close to the speaker cone. The robust metal construction ensures reliable performance.

The microphone can be used for miking instruments, providing clear sound reproduction.

5. Özellikler

This diagram illustrates the frequency response and unidirectional (cardioid) polar pattern of the TM-82 microphone, showing its sensitivity across different frequencies and directions.

6. Bakım

• Temizlik: Mikrofon gövdesini temizlemek için yumuşak, kuru bir bez kullanın. Yüzey kaplamasına veya iç bileşenlere zarar verebileceğinden sıvı temizleyiciler veya çözücüler kullanmayın.
• Depolamak: Store the microphone in a dry, dust-free environment when not in use. Avoid extreme temperatures and humidity.
• İşleme: The TM-82 is built tough with metal materials, but avoid dropping or subjecting it to severe impacts, which can affect performance.

7. Sorun Giderme

• Ses Çıkışı Yok:
  • Ensure the XLR cable is securely connected to both the microphone and the input device (mixer, interface).
  • Check the input device's volume and gain settings.
  • Verify that the input channel on your device is selected and active.
• Düşük Hacim:
  • Increase the gain on your mixer or audio interface.
  • Ensure the microphone is positioned optimally relative to the sound source.
• Unwanted Noise/Feedback:
  • Reposition the microphone to utilize its cardioid pattern, aiming it away from speakers or noise sources.
  • Kablolarda veya bağlantılarda arıza olup olmadığını kontrol edin.
  • Reduce gain levels if feedback persists.

8. Garanti ve Destek

For warranty information and technical support, please refer to the official Tascam website or contact your local Tascam dealer. Warranty terms and conditions may vary by region.

Ziyaret edin Tascam Store Daha fazla ürün ve bilgi için.