1. Giriş
This instruction manual provides detailed guidance for assembling your ROBOTIME Five-Storied Pagoda 3D Wooden Puzzle Model Kit (Model TGN02). This kit allows you to construct a detailed replica of a traditional five-storied pagoda using precisely cut wooden pieces. Follow these instructions carefully to ensure a successful and enjoyable building experience.
Image 1.1: The fully assembled ROBOTIME Five-Storied Pagoda model.
2. Paket İçeriği
Before beginning assembly, verify that all components are present in your kit. The package should contain:
- 275 precisely laser-cut wooden puzzle pieces.
- One detailed English instruction manual with illustrations.
Resim 2.1: Üzeriview of the kit contents, including wooden sheets and instructions.
3. Kurulum ve Hazırlık
- Çalışma Alanını Temizle: Prepare a clean, flat, and well-lit surface for assembly. Ensure sufficient space to lay out all pieces and the instruction manual.
- Review Talimatlar: Carefully read through the entire instruction manual before starting. Familiarize yourself with the assembly steps and diagrams.
- Parçaları Tanımlayın: The wooden pieces are organized on sheets and are numbered or lettered. Gently push out the pieces as needed. Avoid forcing pieces to prevent breakage.
- No Tools or Glue Required: This model is designed for interlocking assembly without the need for additional tools or adhesives. However, for added stability, some users may opt to use wood glue (not included) on connection points, especially for fragile sections.
Image 3.1: The kit is designed for easy, tool-free assembly.
4. Montaj Talimatları
Follow the numbered steps and corresponding diagrams in your physical instruction manual. The general process involves:
- Step 1: Detailed Instruction Review
Refer to the provided instruction booklet for step-by-step visual guides. Each step will illustrate which pieces to use and how they connect. - Step 2: Extracting Pieces
Carefully detach the required wooden pieces from their sheets. Use gentle pressure. If a piece is stubborn, a small craft knife (not included) can assist, but exercise caution. - Step 3: Step-by-Step Assembly
Assemble the model section by section, following the sequence in the manual. Pay close attention to the orientation of each piece. - Adım 4: Bileşenleri Bağlama
Interlock the pieces by aligning tabs with slots and applying steady, even pressure. Avoid excessive force to prevent damage.
Resim 4.1: Üzeriview of the assembly process from instructions to finished model.
Tuş Montaj İpuçları:
- Sabır Anahtardır: Take your time with each step. Rushing can lead to errors or damaged pieces.
- Nazik Kullanım: Some pieces, especially smaller or thinner ones, can be fragile. Handle them with care.
- Diyagramlara bakınız: The visual diagrams are crucial. Cross-reference them frequently to ensure correct placement.
- Bağlantıların Güvenliğini Sağlama: Ensure all connections are fully seated. A slight wiggle might be needed to properly align tabs and slots.
Image 4.2: Assembling the base structure and stairs.
Image 4.3: Attaching a roof section.
Image 4.4: Assembling the top spire.
5. Bakım ve Özen
To preserve the appearance and integrity of your assembled Five-Storied Pagoda model, follow these care guidelines:
- Toz alma: Regularly dust the model with a soft, dry cloth or a soft brush to prevent dust accumulation in intricate areas.
- Nemden Kaçının: Keep the model away from water and high humidity, as wood can warp or swell.
- Doğrudan güneş ışığı: Prolonged exposure to direct sunlight can cause the wood to fade or become brittle. Display the model in a location with indirect light.
- İşleme: Handle the model carefully, especially when moving it, to avoid dislodging or breaking delicate pieces.
6. Sorun Giderme
Here are solutions to common issues encountered during assembly:
| Sorun | Çözüm |
|---|---|
| Parçalar kolayca bir araya gelmiyor. | Ensure the pieces are correctly oriented according to the instructions. Apply gentle, even pressure. Do not force. If a tab is slightly too large, a fine-grit sandpaper (not included) can be used sparingly to reduce its size. |
| A piece breaks during removal or assembly. | If a piece breaks, wood glue (not included) can be used to repair it. Apply a small amount, hold the pieces together until set, and allow to dry completely before continuing. |
| The assembled structure feels unstable. | Double-check all connections to ensure pieces are fully seated. For increased stability, especially in load-bearing areas, consider applying a small amount of wood glue to the joints. |
| Cannot identify a specific piece. | Refer to the piece identification diagrams in the instruction manual. The pieces are typically numbered or shaped uniquely to aid identification. |
7. Özellikler
- Model Numarası: TGN02
- Marka: ROBOZAMAN
- Malzeme: Odun
- Parça Sayısı: 275
- Montajlı Boyutlar: Approximately 12.6 x 6.3 x 6.3 inches (Height x Width x Depth)
- Ürün Ağırlığı: 14.9 ons
- Önerilen Yaş: 8 yaş ve üzeri
- Montaj Zamanı: Approximately 1.5 hours (varies by individual)
Image 7.1: Key specifications and dimensions of the assembled model.
8. Müşteri Desteği
For any questions regarding assembly, missing pieces, or defective components, please contact ROBOTIME customer service. We are dedicated to ensuring your satisfaction with our products.
Refer to the contact information provided with your purchase or visit the official ROBOTIME webDestek ayrıntıları için site.
Note: This product is intended for educational and entertainment purposes. Adult supervision is recommended for younger builders.
