1. Giriş
This manual provides essential information for the safe and efficient operation of your Scheppach BAP350 submersible water pump. Please read these instructions carefully before use and keep them for future reference. This pump is designed for pumping clear or slightly contaminated water from various sources such as ponds, rain barrels, and flooded basements.
2. Genel Güvenlik Talimatları
Yaralanmaları ve pompaya zarar gelmesini önlemek için her zaman aşağıdaki güvenlik önlemlerine uyun:
- Elektriksel Güvenlik: Ensure the power supply matches the pump's specifications (230 Volts). Always connect the pump to a properly grounded outlet protected by a Residual Current Device (RCD) with a tripping current of no more than 30 mA. Do not operate the pump with a damaged power cord or plug.
- Su güvenliği: Never operate the pump in swimming pools or areas where people are in the water. Do not pump flammable, explosive, or corrosive liquids.
- Kişisel Güvenlik: Keep children and unauthorized persons away from the pump during operation. Wear appropriate personal protective equipment if necessary.
- Kurulum: Ensure the pump is stable and cannot tip over. Do not lift the pump by its power cable or discharge hose.
- Bakım: Always disconnect the pump from the power supply before performing any maintenance, cleaning, or adjustments.
3. Paket İçeriği
Carefully unpack the product and check that all items are present and undamaged. If any parts are missing or damaged, contact your dealer immediately.
- Scheppach BAP350 Submersible Water Pump
- Kullanıcı Kılavuzu
4. Kurulum
4.1 Tahliye Hortumunun Bağlanması
Attach a suitable discharge hose (not included) to the pump's outlet. Ensure the connection is secure and watertight to prevent leaks and maintain optimal flow. The pump is designed to accommodate standard hose connections.
Şekil 1: Genel view of the Scheppach BAP350 pump with discharge hose and float switch attached.
4.2 Pompanın Konumlandırılması
Place the pump on a stable, level surface in the water to be pumped. Ensure the pump is fully submerged and not resting directly on mud or debris, which could block the intake. If necessary, suspend the pump using a rope attached to its handle.
4.3 Elektrik Bağlantısı
Connect the pump's power plug to a grounded electrical outlet (230V) that is protected by an RCD. Ensure the power cord is not stretched, pinched, or submerged in water during operation.
4.4 Adjusting the Float Switch
The float switch controls the automatic on/off function of the pump. Adjust the length of the float switch cable to set the desired water levels for activation and deactivation. A longer cable length between the pump and the float switch will result in a wider operating range (higher on-level, lower off-level).
Şekil 2: Yan view illustrating the float switch mechanism and its connection to the pump.
5. Pompanın Çalıştırılması
5.1 Otomatik Çalışma
Once the pump is connected and the float switch is adjusted, the pump will automatically start when the water level rises and lifts the float switch. It will stop when the water level drops and the float switch falls below the minimum level.
5.2 Manuel Çalıştırma
For continuous operation, the float switch can be secured in an upright position. This will keep the pump running regardless of the water level. Dikkat: Do not allow the pump to run dry, as this can cause severe damage. Monitor the water level closely during manual operation.
5.3 Kapatma
To stop the pump, either allow the float switch to drop to its off-position (automatic mode) or unplug the pump from the power supply (manual mode). Remove the pump from the water after use and clean it thoroughly.
6. Bakım
Düzenli bakım pompanızın uzun ömürlü olmasını ve optimum performans göstermesini sağlar.
6.1 Pompanın Temizlenmesi
After each use, especially when pumping dirty water, rinse the pump with clean water to remove any debris. Check the intake screen for blockages and clean it if necessary. Disconnect from power before cleaning.
6.2 Depolama
When not in use for extended periods, clean the pump, drain any remaining water, and store it in a dry, frost-free location. Protect the power cord from damage.
6.3 Düzenli Muayene
Periodically inspect the power cord, plug, and pump housing for any signs of damage. Ensure the float switch moves freely. Do not use the pump if any damage is detected; contact qualified service personnel for repairs.
7. Sorun Giderme
Before attempting any repairs, always disconnect the pump from the power supply.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Pompa çalışmıyor | Güç kaynağı yok Float switch not activated Motor protection tripped | Check power connection and RCD Adjust float switch position or water level Pompanın soğumasını bekleyin, ardından yeniden başlatın |
| Low pumping capacity | Intake screen blocked Discharge hose kinked or blocked Pompadaki hava | Clean intake screen Hortumu kontrol edin ve temizleyin. Submerge pump completely, shake gently to release air |
| Pompa sürekli çalışıyor | Float switch stuck in 'on' position Water level too high for float switch setting | Check float switch for obstructions Adjust float switch cable length |
| Pompa çalışma sırasında duruyor | Aşırı ısınma Elektrik kesintisi Float switch deactivated | Allow pump to cool down Güç kaynağını kontrol edin Check water level and float switch position |
8. Teknik Özellikler
| Özellik | Şartname |
|---|---|
| Marka | Scheppach |
| Örnek | BAP350 |
| Güç Kaynağı | Wired (Kabelgebunden) |
| Cilttage | 230 Volt |
| Maksimum Akış Hızı | Saatte 4000 Litre |
| Ürün Ağırlığı | 1.9 Kilogram (4.18 pound) |
| Ürün Boyutları | 11.81 x 7.87 x 5.91 inç |
| Malzeme | Plastik |
| Özel Özellikler | Hafif |
| Dahil Bileşenler | Pump, Manual |
9. Garanti ve Destek
Your Scheppach BAP350 submersible water pump is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period and claim procedures.
For technical assistance, spare parts, or warranty claims, please contact your authorized Scheppach dealer or visit the official Scheppach website for customer support information. Always have your model number (BAP350) and purchase date available when contacting support.
