Scheppach SBP250 Submersible Pump User Manual

giriiş

Thank you for choosing the Scheppach SBP250 Submersible Pump. This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your pump. Designed for clean water transfer from rain barrels or cisterns, it features a powerful 250W motor, a capacity of 6500 liters per hour, and an automatic float switch for convenient use. Please read these instructions carefully before operating the device and keep them for future reference.

Güvenlik Talimatları

Yaralanma veya hasarı önlemek için her zaman aşağıdaki güvenlik önlemlerine uyun:

• Ensure the power supply matches the specifications on the pump's rating plate.
• Pompayı asla hasarlı bir güç kablosu veya fişle çalıştırmayın.
• Do not lift or carry the pump by its power cord.
• Çocukları ve yetkisiz kişileri çalışma alanından uzak tutun.
• Herhangi bir bakım veya temizlik işlemi yapmadan önce pompayı mutlaka elektrik beslemesinden ayırın.
• The pump is designed for clean water only. Do not use it for flammable, corrosive, or explosive liquids.
• Aşırı ısınmayı önlemek için pompanın çalışma sırasında tamamen suya batırılmış olduğundan emin olun.
• Pompanın susuz çalışmasını önleyin.

Ürün Bittiview

The Scheppach SBP250 submersible pump is designed for efficient water transfer. Familiarize yourself with its main components:

• Pompa gövdesi: Durable plastic housing protecting the motor and internal components.
• Motor: Powerful 250W motor for efficient water pumping.
• Şamandıra Anahtarı: Automatically turns the pump on and off based on water level.
• Deşarj Bağlantısı: Standard 1¼" connection for hoses.
• Güç kablosu: 10-meter cable for extended reach, designed to be plugged outside the wet area.
• Halletmek: Integrated handle for easy transport and lowering/raising the pump.

Kurmak

Follow these steps to set up your submersible pump:

1. Paketin açılması: Carefully remove the pump from its packaging. Check for any signs of damage.
2. Hortum bağlantısı: Attach a suitable discharge hose (not included) to the 1¼" discharge connection. Ensure a tight and secure fit to prevent leaks.
3. Pompanın Konumlandırılması:

   

   Place the pump on a stable, level surface in the water source (e.g., rain barrel, cistern). Ensure the pump is fully submerged and not resting on mud or debris that could block the intake. The float switch must be able to move freely to ensure automatic operation.
4. Güç Bağlantısı: Ensure your hands are dry. Plug the 10-meter power cable into a grounded electrical outlet. The outlet should be located outside the wet area.

İşletim

The SBP250 pump operates automatically via its float switch:

1. Otomatik çalışma: Once plugged in and submerged, the pump will automatically start when the water level rises and lifts the float switch. It will stop when the water level drops and the float switch lowers.
2. Manuel Geçersiz Kılma (varsa): Some models allow the float switch to be fixed in an 'up' position for continuous operation. Refer to the specific instructions for your model if this feature is desired. For the SBP250, ensure the float switch can move freely for standard automatic operation.
3. İzleme: Periodically check the pump's operation and the water level. Ensure the discharge hose is clear and directing water as intended.

Bakım

Düzenli bakım pompanızın uzun ömürlü olmasını ve optimum performans göstermesini sağlar:

• Temizlik: After each use, especially if pumping slightly dirty water, rinse the pump thoroughly with clean water. Remove any debris that may have accumulated around the intake screen.
• Denetleme: Regularly inspect the power cable and plug for any damage. Check the discharge connection for wear or leaks.
• Kış Deposu: If storing the pump in freezing temperatures, ensure all water is drained from the pump and hose to prevent damage from ice expansion. Store in a dry, frost-free location.
• Kullanıcı Tarafından Bakımı Yapılabilecek Parça Yok: The motor and internal components are not user-serviceable. Do not attempt to open the pump housing.

Sorun giderme

İşte bazı yaygın sorunlar ve bunların çözümleri:

Özellikler

Garanti ve Destek

Scheppach products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official Scheppach website. Please have your model number (SBP250) and purchase details ready when contacting support.

For further assistance, you may contact Scheppach customer service directly. Contact details can typically be found on the manufacturer's webSitede veya ürün ambalajında.