giriiş
Thank you for choosing the PELONIS 16-inch Pedestal Fan. This manual provides important information regarding the assembly, operation, maintenance, and troubleshooting of your new fan. Please read it thoroughly before use and retain it for future reference.
This fan is designed to provide efficient and energy-saving cooling with its powerful motor and high-quality blades. It features three speed settings, an 85-degree wide oscillation angle, a 7-hour shut-off timer, and adjustable height and tilt for customized comfort.
Image: The PELONIS 16-inch Pedestal Fan, showcasing its sleek black design and adjustable stand.
Önemli Güvenlik Bilgileri
Please read and follow all safety instructions to reduce the risk of fire, electric shock, or injury.
- Temizlik veya bakım yapmadan önce mutlaka vantilatörün fişini çekin.
- Do not insert fingers or foreign objects into the grille when the fan is operating.
- Devrilmesini önlemek için vantilatörün sabit ve düz bir yüzeye yerleştirildiğinden emin olun.
- Hasarlı kablo veya fişle vantilatörü çalıştırmayın. Onarım için yetkili servis personeline başvurun.
- Vantilatörü sudan veya aşırı nemden uzak tutun.
- The built-in overheat protection automatically switches the fan off when the motor overheats. If this occurs, unplug the fan and allow it to cool before restarting.
Paket İçeriği
Montajdan önce tüm bileşenlerin mevcut olduğundan emin olun:
- Fan Başlığı Tertibatı (Motor, Kanatlar, Ön ve Arka Izgaralar)
- Yüksekliği Ayarlanabilir Direk
- Yuvarlak Taban
- Uzaktan Kumanda (2 adet AAA pil gerektirir, pil dahil değildir)
- Mounting Hardware (screws, nuts, wrench)
Kurulum ve Montaj
PELONIS ayaklı vantilatörünüzü monte etmek için şu adımları izleyin:
- Adım 1: Tabanı takın. Place the round base on a flat surface. Insert the bottom end of the adjustable height pole into the center hole of the base. Secure it from underneath the base using the provided screw and wrench.
- Step 2: Adjust Pole Height. Loosen the height adjustment knob on the pole. Extend the inner pole to your desired height (between 3.5 to 4 feet) and tighten the knob to secure it.
- Step 3: Mount the Motor Unit. Attach the fan motor unit to the top of the adjustable height pole. Ensure it is securely fastened with the provided screw and wrench.
- Step 4: Install Rear Grille. Place the rear grille onto the motor unit, aligning the notches. Secure it with the retaining nut provided.
- Step 5: Attach Fan Blades. Slide the fan blades onto the motor shaft, ensuring they are properly seated. Secure the blades with the spinner cap, turning it counter-clockwise to tighten.
- Step 6: Install Front Grille. Attach the front grille to the rear grille, ensuring the clips snap into place around the circumference. Secure the grilles with the small screw at the bottom.
Image: A visual guide demonstrating the six steps for assembling the PELONIS Pedestal Fan, from attaching the base to securing the grilles.
Kullanım Talimatları
PELONIS ayaklı vantilatörünüzü, vantilatör ünitesi üzerindeki kontrol paneli veya birlikte verilen uzaktan kumanda ile çalıştırabilirsiniz.
Kontrol Paneli Fonksiyonları:
Resim: Yakın çekim view of the fan's control panel, showing buttons for Speed, Timer, and On/Off, along with indicator lights for speed and timer settings.
- AÇIK/KAPALI Düğmesi: Fanı açmak veya kapatmak için basın.
- HIZ Düğmesi: Press repeatedly to cycle through the three speed settings: Low, Medium, and High. Corresponding indicator lights will illuminate.
- ZAMANLAYICI Düğmesi: Press repeatedly to set the automatic shut-off timer for 1, 2, 4, or 7 hours. The selected timer duration will be indicated by illuminated lights.
Uzaktan kumanda:
The remote control allows convenient operation from a distance. Insert 2 AAA batteries (not included) into the remote before use.
Image: The remote control for the PELONIS Pedestal Fan, featuring buttons for power, speed, and timer functions.
- The remote control mirrors the functions of the control panel: ON/OFF, SPEED, and TIMER.
- Point the remote directly at the fan's control panel for optimal response.
Oscillation and Tilt Adjustment:
The fan features an 85-degree wide oscillation angle and a 24-degree tilt adjustment to customize airflow direction.
Image: A diagram illustrating the 90-degree oscillation and 24-degree tilt adjustment capabilities of the PELONIS Pedestal Fan, showing how to customize airflow.
- Salınım: Press the oscillation button on the fan's control panel (not available on remote) to activate or deactivate the oscillating movement.
- Eğim Ayarı: Manually adjust the fan head up or down to direct airflow as needed.
Ayarlanabilir yükseklik:
The fan's height can be adjusted from 3.5 feet to 4 feet to suit various environments.
Image: A comparison showing the PELONIS Pedestal Fan at its minimum (3.5 ft) and maximum (4 ft) adjustable heights.
- To adjust height, loosen the height adjustment knob on the pole, slide the inner pole to the desired position, and then firmly tighten the knob.
Bakım
Düzenli temizlik, fanın performansını korumaya ve kullanım ömrünü uzatmaya yardımcı olur.
- Fanın Temizlenmesi: Temizlemeden önce daima vantilatörün fişini çekin. Yumuşak, kuru bir bez kullanın.amp Dış yüzeyleri silmek için bez kullanın. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
- Cleaning Fan Blades and Grilles: Periodically, the front grille can be removed to clean the fan blades and the inside of the grilles. Refer to the assembly instructions for grille removal. Ensure all parts are completely dry before reassembling and operating the fan.
- Depolamak: Uzun süre kullanılmadığı zamanlarda, vantilatörü serin ve kuru bir yerde, tercihen orijinal ambalajında saklayın.
Sorun giderme
Fanınızla ilgili sorunlarla karşılaşırsanız, aşağıdaki yaygın sorunlara ve çözümlere bakın:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Fan çalışmıyor. | Not plugged in; power outlet not working; overheat protection activated. | Ensure fan is securely plugged into a working outlet. Unplug and allow to cool for 30 minutes if overheat protection is suspected. |
| Zayıf hava akışı. | Fan speed too low; grilles or blades are dirty. | Increase fan speed. Clean the fan blades and grilles as per maintenance instructions. |
| Fan gürültülü. | Loose parts; fan not on a level surface; dirty blades. | Check for loose screws or components. Place fan on a stable, level surface. Clean fan blades. |
| Uzaktan kumanda çalışmıyor. | Batteries are dead or incorrectly inserted; remote not pointed at sensor. | Replace batteries (2 AAA). Ensure correct polarity. Point remote directly at the fan's control panel. |
Özellikler
- Marka: pelonis
- Modeli: PFS40A4BBB
- Renk: Siyah
- Elektrikli Fan Tasarımı: Zemin Fan
- Güç Kaynağı: Kablolu Elektrik
- Ürün Ölçüleri: 15"D x 17.91"G x 48.43"Y
- Oda Tipi: Bedroom, Living room, Kitchen, Home Office
- Özel Özellikler: Timer, Adjustable height, Adjustable Tilt, Oscillating
- Önerilen Kullanımlar: Havalandırma, Soğutma, Hava Sirkülasyonu
- Gürültü Seviyesi: 40 dB
Garanti ve Destek
PELONIS products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your product or visit the official PELONIS website. If you require assistance, please contact PELONIS customer service.
Note: This manual is for informational purposes. Product specifications and features may be subject to change without notice.
