1. Ürün Bittiview
The Hifonics BG-4000.1D Brutus Gamma Monoblock Amplifier is a Super D Class car audio amplifier designed to deliver powerful sound to subwoofers. It features a robust aluminum construction for efficient cooling and minimal distortion, along with advanced control capabilities for precise audio tuning.
Resim 1: Ön view of the Hifonics BG-4000.1D Brutus Gamma Monoblock Amplifier, showcasing its sleek design and Hifonics branding.
Bu amplifier is engineered for high performance, providing up to 4000 watts at 1 ohm, 2200 watts at 2 ohms, and 1100 watts at 4 ohms. It includes a wired bass remote for convenient control and features Ultra-Fi MOSFET output device technology for powerful and clear sound reproduction.
2. Güvenlik Bilgileri
WARNING: Failure to follow these safety instructions may result in fire, electric shock, injury, or damage to the product or vehicle.
- Herhangi bir elektrik işi yapmadan önce mutlaka aracın aküsünün bağlantısını kesin.
- Uygun topraklamanın yapıldığından emin olun ampAraç şasisine kaldırıcı.
- Aşırı ısınmayı ve hasarı önlemek için güç, topraklama ve hoparlör bağlantıları için uygun kalınlıkta kablo kullanın.
- Kurulum amplifier in a well-ventilated area to prevent overheating. Avoid mounting in enclosed spaces without adequate airflow.
- Tüm kabloları keskin kenarlardan ve hareketli parçalardan koruyun.
- Açığa çıkarmayın ampneme veya aşırı sıcaklıklara maruz bırakmayın.
- Seek professional installation if you are unsure about any part of the setup process.
3. Kurulum ve Kurulum
3.1 Montajı Ampcankurtaran
Select a mounting location that provides adequate ventilation and is protected from moisture. The amplifier's aluminum heat sink is designed for efficient cooling, but proper airflow is still essential. Secure the ampKaldırıcıyı uygun donanım kullanarak sağlam bir yüzeye sıkıca sabitleyin.
Resim 2: Yan view of'un amplifier, illustrating its compact dimensions (L) 21.94" x (W) 11.81" x (H) 4.06" and built-in bass control.
3.2 Kablo Bağlantıları
All connections should be made with the vehicle's battery disconnected. Use high-quality, appropriate gauge wiring for all connections.
Image 3: Rear panel of the amplifier showing power, ground, remote, and speaker output terminals. Note the illuminated power and protect indicators.
Güç ve Toprak Bağlantıları:
- +12V (Güç): Connect to the positive terminal of the vehicle's battery via an appropriate fuse or circuit breaker (not included).
- GND (Toprak): Araç şasisinin temiz, boyasız metal yüzeyine bağlayın. Sağlam ve düşük dirençli bir bağlantı olduğundan emin olun.
- REM (Uzaktan): Araçtaki araç multimedya sisteminin uzaktan açma/kapama çıkışına bağlayın.
Resim 4: Yakın çekim view of the secure molded connection terminals for power, ground, remote, and speaker outputs, designed for high-temperature and impact resistance.
Hoparlör Çıkış Bağlantıları:
- Connect your subwoofer(s) to the "MONO OUTPUT" terminals. Ensure correct polarity (+ to + and - to -).
- The amplifier supports mono operation and is stable down to 1 ohm.
RCA Giriş Bağlantıları:
- Connect the RCA input cables from your head unit's subwoofer output to the amplifier'in "INPUT" RCA jakları.
Resim 5: Yakın çekim amplifier's control panel, including RCA inputs, gain, low-pass filter, subsonic filter, phase, and bass boost adjustments.
3.3 İlk Güçlendirme
After all connections are secure, reconnect the vehicle's battery. The power indicator LED on the amplifier's end panel should illuminate, indicating proper operation. If the protect LED illuminates, refer to the troubleshooting section.
4. Kullanım Talimatları
4.1 Kontrollerin Ayarlanması
The BG-4000.1D amplifier features several adjustable controls to fine-tune your audio output:
- KAZANÇ: Adjusts the input sensitivity to match the output of your head unit. Start with the gain at minimum and slowly increase until desired volume is achieved without distortion.
- LPF (Alçak Geçirgen Filtre): Controls the upper frequency limit for the subwoofer. Typically set between 40Hz and 180Hz to ensure only low frequencies are sent to the subwoofer.
- SUBSONİK: Filters out extremely low frequencies that are inaudible and can damage subwoofers. Typically set between 10Hz and 40Hz.
- FAZ: Adjusts the phase of the subwoofer output (0° or 180°) to optimize bass response with other speakers in the vehicle.
- BAS KUVVETLENDİRME: Provides an adjustable bass enhancement (0dB to 12dB) at a specific frequency. Use sparingly to avoid distortion.
4.2 Wired Bass Remote
The included wired bass remote allows for convenient adjustment of the subwoofer output level from the driver's seat. Connect the remote to the dedicated port on the ampAmplifikatörün kontrol paneli.
4.3 LED Göstergeleri
- PWR (Güç) LED'i: Yandığında yeşil renkte yanar. amplifier açık ve normal şekilde çalışıyor.
- PRT (Protect) LED: olduğunda kırmızı yanar ampAmplifikatör bir arıza tespit eder (örneğin, aşırı ısınma, kısa devre, düşük voltaj).tage). If this LED lights up, turn off the audio system and investigate the cause.
For optimal performance, refer to the detailed instructions in the full product manual for specific settings and tuning recommendations.
5. Bakım
- Temizlik: Temizlemek için yumuşak ve kuru bir bez kullanın. amplifier'in dış yüzeyini temizleyin. Sert kimyasallar veya aşındırıcı temizleyiciler kullanmayın.
- Havalandırma: Periyodik olarak kontrol edin amplifier's heat sink fins are free from dust and debris to ensure proper cooling.
- Bağlantılar: Ensure all power, ground, and speaker connections remain tight and free from corrosion.
6. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Güç Yok (Güç LED'i kapalı) | Sigorta atmış, güç/toprak/uzaktan kumanda kablosu gevşek, uzaktan kumanda sinyali yok. | Check fuse, verify all connections are secure, ensure head unit is sending a remote signal. |
| Protect LED is on | Overheating, short circuit in speaker wiring, low impedance load. | İzin vermek ampAmplifikatörün soğumasını bekleyin, hoparlör kablolarında kısa devre olup olmadığını kontrol edin, hoparlör empedansının uygun aralıkta olduğundan emin olun. amplifier's limits. |
| Ses Çıkışı Yok | Loose RCA cables, incorrect gain setting, speaker wires disconnected. | Check RCA connections, adjust gain, verify speaker wire connections. |
| Bozuk ses | Gain set too high, improper LPF/Subsonic settings, poor quality audio source. | Reduce gain, adjust LPF/Subsonic filters, use a higher quality audio source. |
7. Özellikler
| Özellik | Detay |
|---|---|
| Örnek | BG-4000.1D |
| Marka | Hifonik |
| Ampkaldırıcı Sınıf | Super D Class |
| Kanal Sayısı | 1 (Monoblok) |
| Çıkış Gücü (1 Ohm) | 1 channel x 4,000 watts |
| Çıkış Gücü (2 Ohm) | 1 channel x 2,200 watts |
| Çıkış Gücü (4 Ohm) | 1 channel x 1,100 watts |
| Cilttage | 12 Volt (DC) |
| Maksimum Arz Hacmitage | 12 Volt (DC) |
| Montaj Tipi | Araba Montajı |
| Malzeme | Alüminyum |
| Ürün Ağırlığı | 13.52 pound |
| Özel Özellikler | Wired Bass Remote, Variable Electronic Crossover, Electronic Equalizer, Ultra-Fi MOSFET Output Technology, Overload & Speaker Short Protection |
7.1 Ürün Videosu
Video 1: Official Hifonics video showcasing the Brutus Gamma BG Amplifier series, highlighting its features and design.
8. Garanti ve Destek
8.1 Garanti Bilgileri
This Hifonics product is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms, conditions, and duration. Keep your proof of purchase for warranty claims.
8.2 Müşteri Desteği
For technical assistance, troubleshooting, or warranty inquiries, please contact Hifonics customer support. Visit the official Hifonics webEn güncel iletişim bilgileri ve destek kaynakları için siteyi ziyaret edin.
