Baridi 5L Beer Keg Dispenser Tap with Integrated Cooling

1. Giriş ve Güvenlik Bilgileri

Satın aldığınız için teşekkür ederizasing the Baridi 5L Beer Keg Dispenser. This manual provides essential information for the safe and efficient operation of your new appliance. Please read all instructions carefully before use and retain this manual for future reference.

Önemli Güvenlik Önlemleri:

• Always ensure the dispenser is placed on a stable, level surface.
• Üniteyi suya veya diğer sıvılara batırmayın.
• Çocukların erişemeyeceği yerde saklayınız.
• Use only with standard 5L mini beer kegs and 16g CO2 canisters as specified.
• Çalışma sırasında ünitenin etrafında uygun havalandırmanın olduğundan emin olun.
• Unplug the dispenser from the power outlet before cleaning or maintenance.
• Handle CO2 canisters with care. Do not expose to excessive heat.

2. Ürün Bittiview ve Bileşenler

Familiarize yourself with the various parts of your Baridi Beer Keg Dispenser.

Şekil 2.1: The Baridi 5L Beer Keg Dispenser, showcasing its sleek design with a glass of freshly poured beer on the drip tray.

Şekil 2.2: Açısal bir view of the Baridi Beer Keg Dispenser, highlighting the tap mechanism and the cooling vents on the side.

Temel Bileşenler:

• Dispenser Unit: Main body housing the cooling system and keg compartment.
• Musluk Kolu: Used to dispense beer.
• Damlama tepsisi: Removable tray to catch spills.
• Temperature Display/Controls: LED screen and buttons for temperature adjustment.
• CO2 Canister Holder: Internal compartment for CO2 canisters.
• Universal Fitting System: Adapters for various 5L keg types.

3. Kurulum ve Kurulum

Follow these steps for the initial setup of your beer keg dispenser.

1. Paketin açılması: Tüm bileşenleri ambalajından dikkatlice çıkarın. Ambalajı, ilerideki taşıma veya depolama için saklayın.
2. Atama: Place the dispenser on a flat, stable, and dry surface. Ensure there is adequate space around the unit for ventilation (at least 10cm on all sides).
3. Damlama Tepsisi Kurulumu: Slide the drip tray into the designated slot at the base of the dispenser.
4. Keg Preparation: Ensure your 5L beer keg is chilled before placing it into the dispenser for optimal cooling performance.
5. Inserting the Keg: Open the top lid of the dispenser. Carefully place the 5L beer keg into the main compartment.
6. Connecting the Universal Fitting:
   

   Şekil 3.1: The universal fitting system, designed to accommodate most standard 5L kegs, including a separate attachment for Heineken kegs.

   Attach the appropriate universal fitting to your beer keg according to the keg's specific connection type. The dispenser includes a separate attachment for Heineken kegs. Ensure a secure and airtight connection.

7. CO2 Canister Installation:
   

   Şekil 3.2: The Baridi dispenser comes supplied with three 16g CO2 canisters, essential for maintaining beer pressure and freshness.

   Locate the CO2 canister holder. Insert a 16g CO2 canister into the holder and screw it in firmly until you hear a hiss, indicating the canister has been pierced. Do not overtighten. The dispenser is supplied with 3 x 16g CO2 canisters.

8. Kapağı Kapatın: Securely close the top lid of the dispenser.
9. Güç Bağlantısı: Güç kablosunu uygun bir elektrik prizine takın.

4. Kullanım Talimatları

Learn how to chill, adjust temperature, and dispense your beer.

Şekil 4.1: The Baridi dispenser offers universal fitting, chills beer to as low as 4°C, and keeps it fresh for extended periods.

1. Güç Açık: Once plugged in, the unit will power on. The LED display will illuminate.
2. Ayar Sıcaklığı:
   

   Şekil 4.2: The precise LED temperature gauge allows you to monitor and adjust the chilling temperature, capable of reaching as low as 4°C.

   Sıcaklık kontrol düğmelerini kullanın (+ Ve -) to set your desired chilling temperature. The dispenser can chill beer to as low as 4°C. Allow several hours for the beer to reach the set temperature, especially if the keg was not pre-chilled.
3. Dispensing Beer:
   • Place a glass on the drip tray directly under the tap.
   • Bira almak için musluk kolunu öne doğru çekin.
   • Tilt the glass at an angle initially, then straighten it as it fills to control foam.
   • Push the tap handle back to stop the flow.
4. CO2 Pressure Adjustment: The CO2 pressure can be adjusted to control the flow rate and foam level. Refer to the specific instructions for your keg type for optimal pressure settings.
5. Keg Freshness: The dispenser keeps 5L kegs of draft beer fresh for up to 30 days.

5. Bakım ve Temizlik

Regular cleaning ensures optimal performance and hygiene of your dispenser.

1. Fişi çekin: Always unplug the dispenser from the power outlet before cleaning.
2. Damlama tepsisi: The removable drip tray should be emptied and cleaned regularly with warm, soapy water. This helps prevent beer spillage and maintains cleanliness.
3. Dış Temizlik: Ünitenin dışını yumuşak bir bezle silin.amp bezle silin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
4. Tap and Line Cleaning: Periodically clean the tap and beer lines to prevent residue buildup. Consult your keg's instructions or a brewing supply guide for proper line cleaning procedures.
5. Depolamak: Üniteyi uzun süre saklayacaksanız, temiz, kuru ve fişinin çekilmiş olduğundan emin olun. Serin ve kuru bir yerde saklayın.

6. Sorun Giderme

Yaygın sorunlar ve çözümleri için bu bölüme bakın.

7. Özellikler

Technical details of the Baridi 5L Beer Keg Dispenser.

Şekil 7.1: Approximate dimensions of the Baridi 5L Beer Keg Dispenser.

8. Garanti ve Destek

For warranty information and customer support, please refer to the documentation provided with your purchase or contact Dellonda customer service directly.

Üretici: Dellonda

Please visit the official Dellonda webEn güncel destek bilgileri ve iletişim bilgileri için siteyi ziyaret edin.