PowerWalker VFI 3000 AT UPS User Manual

giriiş

The PowerWalker VFI AT series is an online Uninterruptible Power Supply (UPS) system designed to provide reliable power protection for critical electronic devices. This manual provides essential information for the safe and efficient operation of your PowerWalker VFI 3000 AT UPS, model 10122182.

Önemli Güvenlik Talimatları

UPS'i kurmadan, çalıştırmadan veya bakımını yapmadan önce lütfen tüm talimatları dikkatlice okuyun ve uygulayın. Bu kılavuzu ileride başvurmak üzere saklayın.

• Bu UPS tehlikeli madde içeriyor.tagCihazı sökmeye çalışmayın. Servis işlemleri yalnızca yetkili personel tarafından yapılmalıdır.
• Kesintisiz güç kaynağı (UPS) topraklı bir AC elektrik prizine bağlanmalıdır.
• Havalandırma açıklıklarını kapatmayın. UPS'in etrafında yeterli hava akışı sağlayın.
• UPS cihazını doğrudan güneş ışığına, ısı kaynaklarının yakınına veya aşırı toz, nem veya aşındırıcı maddelerin bulunduğu ortamlara kurmayın.
• The internal batteries are not user-replaceable. Contact qualified service personnel for battery replacement.
• In case of fire, use a dry chemical fire extinguisher. Water can be dangerous.

Paket İçeriği

Aşağıda listelenen tüm öğelerin paketinizde bulunduğundan emin olun. Herhangi bir öğe eksik veya hasarlıysa, satıcınızla iletişime geçin.

• PowerWalker VFI 3000 AT UPS Unit
• Kullanım Kılavuzu (bu belge)
• USB İletişim Kablosu
• Güç Giriş Kablosu
• Yazılım CD'si (varsa)

Ürün Bittiview

Ön Panel

Şekil 1: Ön view of the PowerWalker VFI 3000 AT UPS. This image displays the main chassis, ventilation grilles, and the front control panel with its LCD screen and buttons.

Şekil 2: Ayrıntılı view of the UPS front panel. The LCD screen shows input/output voltage and load status. Below the screen are control buttons: ON, OFF, ENTER, and ESC, used for navigating menus and controlling the unit.

The front panel features an LCD display that provides real-time information about the UPS status, including input/output voltage, battery level, and load capacity. Control buttons allow for navigation through the display menus and basic operation of the unit.

Arka Panel

Şekil 3: Arka view of the PowerWalker VFI 3000 AT UPS. This panel includes multiple Type F earthing contact outlets for connecting protected devices, cooling fans, a main power input, and communication ports (USB, RS-232, and an optional slot for network card).

The rear panel provides the necessary connections for input power, output to protected devices, and communication interfaces. It includes four Type F earthing contact outlets, a terminal output, USB and RS-232 communication ports, and slots for optional accessories like network cards.

Kurulum Talimatları

1. Yerleşim

• UPS cihazını düz ve sağlam bir yüzeye yerleştirin.
• Ensure the environment is well-ventilated and free from excessive dust or moisture.
• Maintain at least 20 cm (8 inches) of clearance from the rear and sides of the UPS for proper airflow.
• Avoid placing the UPS near heat-emitting appliances.

2. Güce Bağlanmak

1. Connect the provided power input cable to the UPS input receptacle on the rear panel.
2. Plug the other end of the power input cable into a grounded wall outlet.
3. Pil performansının en üst düzeyde olması için, UPS'in ilk kullanımdan önce en az 8 saat şarj olmasına izin verin.

3. Cihazları Bağlama

1. Plug your critical devices (e.g., computers, servers, network equipment) into the Type F output receptacles on the rear panel of the UPS.
2. Ensure that the total load connected to the UPS does not exceed its rated capacity (2700W for this model).
3. For devices requiring terminal output, connect them according to electrical safety standards.

4. Ilk başlangıç

1. After connecting the UPS to AC power and allowing initial charging, press and hold the ON button on the front panel for approximately 2 seconds.
2. The UPS will perform a self-test, and the LCD display will illuminate, indicating operational status.
3. The UPS is now providing protected power to the connected devices.

UPS'in çalıştırılması

Açma/Kapatma

• Açmak için: Basılı tutun ON 2 saniye boyunca düğmeye basın.
• Kapatmak: Basılı tutun KAPALI button for 2 seconds. The UPS will shut down, and power to connected devices will cease.

LCD Ekranı Anlamak

The LCD display provides critical information about the UPS status. Use the GİRMEK Ve ESC buttons to navigate through different display screens, which may include:

• Giriş Voltage ve Frekans
• Çıkış Hacmitage ve Frekans
• Pil Şarj Seviyesi
• Yük Yüzdesitage
• Operating Mode (Online, Battery, Bypass)
• Hata Kodları (varsa)

Pil Yedekleme İşlemi

Bir elektrik kesintisi durumundatage veya önemli hacimtage fluctuation, the UPS will automatically switch to battery power to provide continuous power to connected devices. An audible alarm may sound, and the LCD will indicate "Battery Mode." The duration of battery backup depends on the load connected and the battery charge level.

İletişim Yazılımı

For advanced monitoring and management, install the provided communication software on a computer connected to the UPS via the USB or RS-232 port. This software allows for scheduled shutdowns, remote monitoring, and detailed event logging.

Bakım

Pil Bakımı

• Ensure the UPS is connected to AC power at all times to keep the batteries fully charged.
• Perform a battery self-test periodically (e.g., once every 3 months) using the UPS front panel controls or communication software to verify battery health.
• Batteries have a limited lifespan. If the battery backup time significantly decreases, contact qualified service personnel for replacement.

Temizlik

• Disconnect the UPS from AC power and all connected devices before cleaning.
• UPS cihazının dış yüzeyini yumuşak, kuru bir bezle silin.
• Cihaza zarar verebileceğinden sıvı veya aerosol temizleyiciler kullanmayın.
• Periodically clean the ventilation grilles to prevent dust buildup, which can impede airflow and cause overheating.

Depolamak

• If storing the UPS for an extended period, ensure the batteries are fully charged.
• Store the UPS in a cool, dry place.
• Recharge the batteries every 3 months during storage to prevent deep discharge and prolong battery life.

Sorun giderme

Refer to the table below for common issues and their solutions. If the problem persists, contact technical support.

Özellikler

Garanti ve Destek

The PowerWalker VFI 3000 AT UPS is covered by a manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official PowerWalker webalan.

For technical support, service inquiries, or to report any issues, please contact your local dealer or PowerWalker customer service. Have your model number (10122182) and purchase information ready when contacting support.