ORIA Motion Sensor Light User Manual

1. Giriş

Satın aldığınız için teşekkür ederizasing the ORIA Motion Sensor Light. This battery-powered LED night light is designed to provide convenient, automatic illumination in various areas of your home. Please read this manual carefully before installation and use to ensure proper operation and longevity of your device.

2. Paket İçeriği

• 3 x ORIA Motion Sensor Night Light
• 6 x Vida
• 1 x Çift Taraflı Yapışkan Bant
• 1 x Kullanım Kılavuzu

3. Özellikler

4. Güvenlik Bilgileri

• Eski ve yeni pilleri karıştırmayın.
• Alkalin, standart (karbon-çinko) veya şarj edilebilir (nikel-kadmiyum) pilleri karıştırmayın.
• Pillerin doğru kutuplara (+ ve -) dikkat edilerek takıldığından emin olun.
• Eğer ışık uzun süre kullanılmayacaksa pilleri çıkarın.
• Bu cihaz yalnızca iç mekanda kullanıma uygundur.
• Suya veya aşırı neme maruz bırakmayın.
• Çocukların erişemeyeceği yerde saklayınız.

5. Kurulum

5.1 Pil Kurulumu

1. Gently twist the back cover of the light counter-clockwise to open the battery compartment.
2. Pil yuvasına 3 adet AAA pil (dahil değildir) yerleştirin ve doğru kutuplara dikkat edin.
3. İşaretleri hizalayarak ve saat yönünde çevirerek arka kapağı yerine takın.

5.2 Montaj Seçenekleri

The ORIA Motion Sensor Light offers two installation methods:

Image: Demonstrates the two installation methods: using screws for a permanent fixture or double-sided adhesive tape for a temporary, non-damaging mount.

Seçenek 1: Vida Montajı

• Choose a desired location for the light.
• Mark the positions for the two screw holes on the mounting surface.
• Gerekirse pilot delikler açın.
• Secure the light to the surface using the provided screws.

Option 2: Adhesive Tape Mounting

• Montaj yapılacak yüzeyi iyice temizleyip kurulayın.
• Peel off one side of the double-sided adhesive tape and apply it firmly to the back of the light.
• Peel off the other side of the tape and press the light firmly onto the mounting surface for at least 30 seconds.
• Allow 24 hours for the adhesive to fully cure before applying significant pressure.

6. Kullanım Talimatları

The ORIA Motion Sensor Light features three operating modes: ON, OFF, and AUTO.

Image: Illustrates the light's behavior: off during daylight, activating upon motion detection, and automatically turning off after 30 seconds of no motion.

6.1 Mod Seçimi

Locate the switch on the side of the light to select your desired mode:

• AÇIK: The light will remain continuously on, regardless of ambient light or motion.
• KAPALI: The light will remain off.
• AUTO (Motion Sensor Mode): The light will automatically turn on when motion is detected in a dark environment. It will turn off approximately 30 seconds after motion ceases.

6.2 Hareket Sensörü İşlevselliği

Image: A motion sensor light mounted on a wall, illuminating a staircase as a person ascends, demonstrating its practical application.

• Algılama Açısı: 120 derece
• Algılama Mesafesi: 9.8 ft'ye kadar (3 metre)
• The sensor is designed to activate only in low-light conditions to conserve battery life.
• Avoid placing the light in direct sunlight or near heat sources, as this may affect sensor performance.

7. Bakım

• Temizlik: Wipe the light with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
• Pil Değişimi: When the light dims or fails to activate, replace all 3 AAA batteries with new ones. Ensure correct polarity.
• Sensör Bakımı: Keep the motion sensor lens clean and unobstructed for optimal performance.

8. Sorun Giderme

9. Garanti ve Destek

ORIA products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official ORIA webalan.

Lütfen bu kılavuzu ileride başvurmak üzere saklayın.