FLEXISPOT EN2 55x28 Electric Height Adjustable Standing Desk Instruction Manual

1. Giriş

Thank you for choosing the FLEXISPOT EN2 55x28 Electric Height Adjustable Standing Desk. This manual provides essential information for the safe assembly, operation, and maintenance of your new desk. Please read all instructions carefully before use and retain this manual for future reference.

2. Güvenlik Bilgileri

• Montajdan önce tüm parçaların mevcut ve hasarsız olduğundan emin olun.
• Assembly may require two people due to the weight of components.
• Çalışma sırasında çocukları ve evcil hayvanları masadan uzak tutun.
• Do not overload the desk. The maximum weight recommendation is 154 pounds (70 kg).
• Ensure all electrical connections are secure and follow local electrical safety standards.
• Sıvıları doğrudan kontrol panelinin üzerine veya elektrikli bileşenlerin yakınına koymaktan kaçının.
• Yalnızca verilen güç adaptörünü kullanın.
• Do not disassemble or modify the desk's motor or control system.

3. Paket İçeriği

Your FLEXISPOT EN2 desk will arrive in two separate packages. Please verify all components against the packing list before beginning assembly.

• Desktop (55" x 28" White Top)
• Desk Frame (Gray Frame)
• Lifting Columns (Legs)
• Çapraz kiriş
• Destek Plakaları
• Motor
• Control Panel (Keypad)
• Güç Adaptörü ve Kablolar
• Clamp 3 adet AC priz ve 2 adet USB portlu çoklu priz
• Kablo Yönetim Tepsisi
• Assembly Hardware (screws, hex keys, wrench)
• Kullanım Kılavuzu

4. Montaj Talimatları

Please follow these steps carefully. An electric drill (not included) may be required for some steps.

1. Masaüstünü Hazırlayın: Lay the desktop upside down on a soft, clean surface to prevent scratches. The packaging includes foam pads that can be used for this purpose.
2. Motorun Kurulumu: Attach the motor to the right lifting column. Ensure the motor's gear aligns with the column's mechanism and secure it with the provided screws and hex key. Tighten screws gradually and evenly.
3. Attach Lifting Columns to Crossbeam: Connect the lifting columns to the crossbeam. Ensure the orientation is correct as per the manual (e.g., motor side).
4. Install Support Plates: Secure the support plates to the lifting columns using the specified screws.
5. Masa ayaklarını takın: Attach the desk feet to the bottom of the lifting columns. Ensure they are securely fastened.
6. Install Transmission Rod: Insert the transmission rod between the lifting columns, connecting it to the motor. Loosen the nut on the rod if necessary for insertion, then tighten it.
7. Mount the Control Panel (Keypad): Position the control panel on the underside of the desktop, typically on the front right edge for easy access. Secure it with the provided screws.
8. Mount the Cable Management Tray: Assemble the cable management tray by bending it along the perforated lines. Mount it to the underside of the desktop using the provided screws. Ensure the shorter lip faces the back to allow cables to drop in.
9. Kablolamayı Bağlayın: Connect the motor cable, control panel cable, and power adapter to the main control box. Use the provided cable ties and adhesive clips to organize and secure all cables neatly under the desk and within the cable management tray.
10. Cl'yi ekleamp Priz Şeridi: clamp power strip can be attached to the back or side of your desk. Adjust the clamp to fit your desktop thickness and secure it in your desired location.
11. Son Kontrol: Ensure all screws are tightened and all cables are securely connected and managed. Carefully flip the desk upright.

5. Kullanım Talimatları

FLEXISPOT EN2 çalışma masanız, kolay yükseklik ayarı ve hafıza ön ayarları için sezgisel 6 düğmeli dijital kontrol ünitesine sahiptir.

• Yukarı/Aşağı Düğmeleri (Oklar): Press the up arrow to raise the desk and the down arrow to lower it. The current height will be displayed on the LED screen.
• Bellek Ön Ayarları (1, 2, 3, 4): Your desk can store up to four preferred height settings. To set a memory position:
  1. Yukarı/aşağı oklarını kullanarak masayı istediğiniz yüksekliğe ayarlayın.
  2. Press the 'M' button. The LED display will show 'S-'.
  3. Press the desired number button (1, 2, 3, or 4) within 3 seconds. The height is now saved.
• Çarpışma Önleme Özelliği: The desk is equipped with an anti-collision system. If the desk encounters an obstacle during movement, it will stop and reverse slightly to prevent damage. You can adjust the sensitivity of this feature (refer to the full manual for detailed instructions on adjusting sensitivity levels).

6. Özellikler

• Çıkarılabilir Masaüstü Elektrik Prizi: Equipped with 3 power outlets and 2 USB charging ports, clip it to the back or side of your desk.
• AmpTüm Parça Masaüstü: FSC-Certified wood desktop (55" x 28") provides generous space. Hand-measured: ±1" tolerance.
• 4 Hafıza Düğmesi: 6-button digital controller with 4 programmable memory presets.
• Motorized Height Adjustment: Smoothly adjusts from 28.1” to 45.7” with a quiet motor (less than 50 dB).
• Dayanıklı Yapı: Industrial-grade steel frame and solid tabletop support up to 176 pounds.
• Kablo yönetimi: Integrated cable management device to keep your workspace tidy.

7. Özellikler

8. Bakım

• Temizlik: Masa yüzeylerini ad ile silin.amp bez. Kaplamaya zarar verebilecek sert kimyasallardan kaçının.
• Düzenli Kontroller: Tüm vida ve cıvataların sıkı olduğundan emin olmak için düzenli olarak kontrol edin. Gerekirse tekrar sıkın.
• Kablo Denetimi: Regularly inspect power cords and connections for any signs of wear or damage. Replace immediately if damage is found.

9. Sorun Giderme

Masaüstü bilgisayarınızla ilgili herhangi bir sorunla karşılaşırsanız, lütfen aşağıdaki yaygın çözümlere bakın:

• Masa Hareket Etmiyor: Check all cable connections, especially the power adapter and motor cable. Ensure the power outlet is functioning.
• Uneven Movement/Wobble: Ensure all assembly screws are tightened evenly. Check if the desk is placed on a level surface. Adjust the leveling feet if necessary.
• Denetim Masası Yanıt Vermiyor: Try resetting the desk. (Refer to the full manual for specific reset procedures, often involves holding down specific buttons until 'RST' appears).
• Anti-Collision Triggering Frequently: The sensitivity of the anti-collision feature might be too high. Refer to the full manual for instructions on adjusting sensitivity levels.

10. Garanti ve Destek

Your FLEXISPOT EN2 desk comes with a comprehensive warranty:

• 5 Yıllık Garanti: Çerçeveleri, motorları ve diğer mekanik cihazları kapsar.
• 2 Yıllık Garanti: Kontrolörleri, anahtarları ve elektronik cihazları kapsar.

For warranty claims, technical support, or any questions not covered in this manual, please contact FLEXISPOT customer service through their official website or the retailer where you purchased the product. Please have your model number (EN2) and proof of purchase ready.