VERICO LoopEnergy USB Type-C Rechargeable D Batteries

1. Giriş

Thank you for choosing VERICO LoopEnergy USB Type-C rechargeable D batteries. These innovative batteries offer a convenient and eco-friendly power solution for a wide range of devices. Designed for durability and high performance, they feature a stable 1.5V output and can be recharged easily via a standard USB Type-C cable.

This manual provides essential information on how to safely and effectively use, charge, and maintain your VERICO LoopEnergy batteries.

Paket İçeriği:

• 2 x VERICO LoopEnergy D Mono Rechargeable Batteries
• 1 x USB Type-A to 2x Type-C Charging Cable

Figure 1.1: VERICO LoopEnergy D Batteries and Included Charging Cable.

2. Güvenlik Bilgileri

Please read all safety instructions carefully before using the batteries. Failure to follow these instructions may result in fire, electric shock, battery damage, or other hazards.

• Do not disassemble, open, or shred battery cells or packs.
• Do not short-circuit a battery. Do not store batteries haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by conductive materials.
• Pilleri ısıya veya ateşe maruz bırakmayın. Doğrudan güneş ışığı altında saklamaktan kaçının.
• Pilleri mekanik şoka maruz bırakmayın.
• Pil sızıntısı durumunda, sıvının cildinize veya gözünüze temas etmesine izin vermeyin. Temas halinde, etkilenen bölgeyi bol su ile yıkayın ve tıbbi yardım alın.
• Ekipmanla birlikte kullanılmak üzere özel olarak sağlanan şarj cihazı dışında herhangi bir şarj cihazı kullanmayın.
• Pil ve cihaz üzerindeki artı (+) ve eksi (-) işaretlerine dikkat edin ve doğru şekilde kullanın.
• Pilleri çocukların erişemeyeceği yerlerde saklayın.
• Eski ve yeni pilleri veya farklı tip ve marka pilleri bir arada kullanmayın.
• The batteries are equipped with multiple protection mechanisms to prevent overcharging, deep discharge, overheating, and short circuits. However, always monitor charging.

3. Kurulum ve Şarj

Your VERICO LoopEnergy batteries come partially charged. For optimal performance, it is recommended to fully charge them before first use.

3.1 İlk Kullanım:

1. Unpack the batteries and the charging cable from the packaging.
2. Proceed to charge the batteries as described in section 3.2.

3.2 Charging the Batteries:

The VERICO LoopEnergy D batteries feature a convenient built-in USB Type-C charging port, eliminating the need for a separate battery charger.

1. Locate the USB Type-C port on the side of each battery.
2. Connect the included USB Type-A to 2x Type-C charging cable to the battery's Type-C port.
3. Plug the USB Type-A end of the cable into a compatible USB power source (e.g., USB wall adapter, power bank, computer USB port).
4. An indicator light on the battery will illuminate during charging. This light will change color or turn off once charging is complete. (Note: Refer to the battery's specific indicator behavior, typically red for charging, green for full.)
5. Tam şarj için genellikle 1 ila 2 saat sürer.

Figure 3.1: Charging a VERICO LoopEnergy D Battery.

4. Kullanım Talimatları

4.1 Inserting Batteries:

Once fully charged, your VERICO LoopEnergy D batteries are ready for use.

1. Cihazınızdaki pil bölmesini bulun.
2. Observe the polarity markings (+ and -) inside the compartment and on the batteries.
3. Insert the batteries, ensuring the positive (+) end of the battery aligns with the positive terminal in the device, and the negative (-) end with the negative terminal.
4. Pil bölmesini sıkıca kapatın.

4.2 Recommended Uses:

These batteries are suitable for a wide range of devices requiring D-size batteries and a stable 1.5V output. Common applications include:

• Remote-controlled vehicles and toys
• El fenerleri ve lambalar
• Milk frothers
• Kablosuz fareler ve klavyeler
• LED string lights, Christmas lighting, decorative lights
• Cassette recorders and radios
• Duman dedektörleri
• Dolap aydınlatması
• Ölçüm cihazları
• Müzik aletleri
• Boomboxes
• Tansiyon aletleri
• Electronic door locks

Figure 4.1: VERICO LoopEnergy D Batteries in a typical household application.

Figure 4.2: VERICO LoopEnergy Batteries providing power for high-drain devices like headlamps.

5. Bakım ve Saklama

Proper maintenance and storage will extend the lifespan of your VERICO LoopEnergy batteries.

5.1 Genel Bakım:

• Keep the battery terminals clean. Use a clean, dry cloth to wipe them if necessary.
• Avoid exposing batteries to extreme temperatures (hot or cold).
• Pilleri suya veya diğer sıvılara batırmayın.

5.2 Depolama:

• If storing batteries for an extended period, charge them to approximately 50% capacity.
• Pilleri serin, kuru bir yerde, doğrudan güneş ışığından ve ısı kaynaklarından uzakta saklayın.
• Store batteries separately from metal objects to prevent short circuits.

5.3 Bertaraf:

Do not dispose of batteries in household waste. Rechargeable batteries contain materials that should be recycled. Please dispose of them at designated recycling points in accordance with local regulations.

6. Sorun Giderme

If you encounter issues with your VERICO LoopEnergy batteries, refer to the following common problems and solutions:

7. Özellikler

Figure 7.1: VERICO LoopEnergy Batteries are available in multiple sizes.

8. Garanti ve Destek

VERICO LoopEnergy batteries are designed for reliability and performance. This product comes with a Yedek parçaların 1 yıl süreyle temin edilebilirliği. üreticinin belirttiği özelliklere göre.

For further assistance, technical support, or warranty claims, please contact VERICO customer service through your point of purchase or visit the official VERICO webalan.

Videolarla ilgili not: Bu kılavuza yerleştirilmek üzere satıcının resmi ürün videoları mevcut değildir.