giriiş
This manual provides essential information for the setup, operation, and maintenance of your Fender American Professional II Precision Bass. Designed for musicians seeking a familiar yet versatile instrument, this bass features a comfortable '63 P Bass neck profile, smooth rolled fingerboard edges, and a "Super-Natural" satin finish. It is equipped with a new V-Mod II split-coil pickup for articulate sound and a HiMass Vintage Bridge for enhanced sustain and attack.
Kurmak
1. Paketten çıkarma
Carefully remove your bass from its case. Inspect the instrument for any visible damage that may have occurred during shipping. Retain all packaging materials for future transport or storage.
2. İlk Muayene
Examine the neck, body, hardware, and electronics. Ensure all components are securely fastened.
3. String Installation and Tuning
Your bass comes with factory strings. For optimal performance, ensure they are properly seated and tuned to standard E-A-D-G (from thickest to thinnest string). Use a reliable electronic tuner for accuracy.
Resim: Tam önden görünüm view of the Fender American Professional II Precision Bass in Olympic White with a rosewood fingerboard and tortoise pickguard.
4. Kayış Bağlantısı
Attach a guitar strap to the strap buttons located on the upper horn and the bottom end of the body. Ensure the strap is securely fastened before playing.
Operating Your Bass
1. Birine bağlanma Ampcankurtaran
Insert a standard 1/4-inch instrument cable into the output jack located on the side of the bass body. Connect the other end of the cable to your bass amplifier'in girdisi.
Resim: Yakın çekim view of the lower body of the Fender Precision Bass, highlighting the volume and tone control knobs, and the 1/4-inch output jack.
2. Kontroller
- Ses Düğmesi: Controls the overall output level of the instrument. Turn clockwise to increase volume, counter-clockwise to decrease.
- Ton Düğmesi: Tiz frekanslarını ayarlar. Daha parlak tonlar için saat yönünde, daha sıcak ve koyu tonlar için saat yönünün tersine çevirin.
3. Playing Position
Hold the bass comfortably, whether standing or seated. Adjust your strap length to allow for easy access to all frets and controls.
Bakım
1. Temizlik
Regularly wipe down the body, neck, and strings with a soft, lint-free cloth after each use to remove sweat and grime. For the body finish, use a guitar-specific polish sparingly. For the rosewood fingerboard, a specialized fretboard conditioner can be applied periodically to prevent drying.
2. Dize Değişimi
Strings should be replaced regularly, depending on usage, to maintain optimal tone and playability. Replace one string at a time to maintain neck tension. Refer to the headstock image for proper string winding around the tuning machines.
Resim: Yakın çekim view of the Fender Precision Bass headstock, showing the four tuning machines and the Fender logo.
3. Klavye Bakımı
Keep the rosewood fretboard clean and moisturized. Avoid harsh chemicals. If the fretboard appears dry, apply a small amount of lemon oil or a dedicated fretboard conditioner.
4. Hardware Inspection
Periodically check all screws and nuts on the tuning machines, bridge, and pickguard for tightness. Do not overtighten.
Sorun giderme
This section addresses common issues you might encounter with your bass.
1. Ses Çıkışı Yok
- Kablo Bağlantılarını Kontrol Edin: Ensure the instrument cable is securely plugged into both the bass and the ampcankurtaran.
- Ampkaldırıcı Güç: Doğrulayın amplifier is turned on and its volume is not set to zero.
- Bas Ses Seviyesi: Confirm the volume knob on your bass is turned up.
- Kablo Bütünlüğü: Kablo arızasını elemek için farklı bir cihaz kablosuyla test edin.
2. Buzzing or Fret Noise
- Playing Technique: Ensure proper finger placement and pressure on the frets.
- String Height (Action): If buzzing persists, the string action might be too low. This may require professional adjustment of the bridge saddles or truss rod.
- Fret Wear: Worn frets can cause buzzing. This typically requires professional fret leveling or replacement.
3. Kötü Tonlama
If notes played at the 12th fret do not match the harmonic at the 12th fret, the intonation needs adjustment. This involves adjusting the length of each string at the bridge saddles. This is a precise adjustment best performed by an experienced technician.
Resim: Yakın çekim view of the Fender Precision Bass bridge, showing the individual saddles and the V-Mod II split-coil pickup.
Özellikler
| Özellik | Detay |
|---|---|
| Model Adı | American Professional II Precision Bass |
| Model Numarası | 0193930705 |
| Gövde Malzemesi | Kızılağaç |
| Vücut Bakımı | Parlak Üretan |
| Boyun Malzemesi | Akçaağaç |
| Boyun Bitirme | "Super-Natural" Satin Urethane with Gloss Urethane Headstock Face |
| Klavye Malzemesi | Gül ağacı |
| Perde Sayısı | 20 |
| Somun Malzemesi | Kemik |
| Köprü | 4-Saddle HiMass Vintage (String-Through-Body or Top-Load) |
| Alıcılar | V-Mod II Split Single-Coil Precision Bass |
| Kontroller | Master Volume, Master Tone |
| Donanım Kaplaması | Nickel/Chrome |
| Dizeler | Fender USA 7250M Nickel Plated Steel (.045-.105 Gauges) |
| Boyutlar (U x G x Y) | 53 x 19 x 6 inç |
| Ürün Ağırlığı | 3 pound (Note: This is likely shipping weight, actual instrument weight may vary) |
Garanti ve Destek
Fender instruments are covered by a limited warranty. For specific details regarding your instrument's warranty coverage, please refer to the warranty card included with your purchase or visit the official Fender website. For technical support, service, or parts, contact Fender customer service directly.
Çevrimiçi Kaynaklar: For additional resources, including FAQs, setup guides, and product registration, visit www.fender.com/support.
