giriiş
The DOVEET DR-41 Atomic Digital Wall Clock is designed to provide accurate time, date, and environmental information with ease. Featuring a large, easy-to-read LCD display, it automatically synchronizes with the WWVB atomic clock signal for precise timekeeping. This manual will guide you through the setup, operation, and maintenance of your new atomic clock and its wireless outdoor sensor.

Figure 1: The DOVEET DR-41 Atomic Digital Wall Clock with its accompanying wireless outdoor sensor.
Temel Özellikler
- Atomik Doğruluk: Built-in receiver for WWVB broadcast signal from NIST, Fort Collins, Colorado, USA, ensuring precise time synchronization daily.
- Jumbo 4.5" Tall LCD Time Display: Large, easy-to-read display showing time (hours, minutes, seconds), indoor and outdoor temperature, calendar, and day of week. Ideal for visibility from a distance.
- Kablosuz Dış Mekan Sensörü: Measures accurate indoor/outdoor temperature and humidity in °F or °C. Wireless range up to 328ft (100M) in open areas.
- Pil ile çalışır: Main unit powered by 4 AA batteries, outdoor sensor by 2 AAA batteries (not included). Extended battery life up to 18 months due to efficient chip design.
- Çok Yönlü Yerleştirme: Can be hung on a wall or placed on a table using the integrated kickstand.
Görsel Özellikler

Figure 2: The clock features a significantly larger display compared to standard clocks, enhancing readability.

Figure 3: The wireless outdoor sensor offers a transmission range of up to 328 feet in open environments.

Şekil 4: Üzeriview of the clock's display elements and rear control buttons for various functions.

Figure 5: The clock and sensor are battery-powered, offering long operational life.
Kurulum Kılavuzu
- Pilleri Takın:
- Open the battery compartment on the back of the main clock unit. Insert 4 new AA batteries, observing polarity (+/-).
- Open the battery compartment on the wireless outdoor sensor. Insert 2 new AAA batteries, observing polarity (+/-).
- Ensure both units are powered on within 3 minutes of each other for successful pairing.
- Sensör Eşleştirme: The outdoor sensor will automatically attempt to pair with the main unit. A signal strength indicator will appear on the clock's display once connected. If pairing fails, press the "CHANNEL" button on the main unit to re-register the channel, or re-insert batteries in both units.
- Atomic Time Synchronization (WWVB):
The clock will automatically attempt to receive the WWVB atomic signal from Fort Collins, Colorado. This usually occurs overnight. Place the clock in an area with good reception, away from large metal objects or electronic interference. A tower icon will appear on the display when the signal is successfully received.
To manually initiate atomic signal reception, press and hold the "DOWN/RCC" button for 3 seconds. The clock will begin searching for the signal.
- Saat Dilimi Ayarla: Press the "UP/ZONE" button repeatedly to cycle through the available time zones (EST, CST, MST, PST, AKST, HST) until your desired time zone is displayed.
- Sıcaklık Birimi Seçimi: Press the "DOWN/RCC" button briefly to switch between Fahrenheit (°F) and Celsius (°C) for temperature display.
Kurulum Video Kılavuzu
Video 1: Official DOVEET guide on setting up the atomic clock and its features.
Kullanım Talimatları
Görüntü Bilgisi:
- Zaman: Large digits display hours, minutes, and seconds. AM/PM indicator is present for 12-hour format.
- Date & Day of Week: Displays month, day, and the full day of the week.
- İç Mekan Sıcaklığı ve Nem Oranı: Shown on the left side of the lower display.
- Dış Ortam Sıcaklığı ve Nem Oranı: Shown on the right side of the lower display, received from the wireless sensor.
- Atomic Signal Indicator: A tower icon indicates successful reception of the WWVB signal.
- DST Göstergesi: Displays when Daylight Saving Time is active.
- Düşük Pil Göstergesi: An icon will appear in the upper right of the screen when batteries are low.
Button Functions (Rear of Unit):
| Düğme | Fonksiyon (Kısa Basış) | Function (Press & Hold) |
|---|---|---|
| AYARLAMAK | Confirm setting in setting mode. | Zaman ayarı moduna girin. |
| ALARM | Switch between normal time and alarm time display. | Alarm ayar moduna girin. |
| UP / ZONE | Advance value in setting mode; Cycle time zones. | (No specific long press function for normal operation) |
| DOWN / RCC | Switch temperature unit (°F/°C). | Initiate manual atomic signal reception. |
| KANAL | Cycle through outdoor sensor channels (1, 2, 3, or auto-cycle). | Re-register outdoor sensor channel. |
Note: The clock can display readings from up to 3 outdoor sensors. Use the CHANNEL button to switch between them or enable auto-cycling.
Bakım
- Pil Değişimi: When the low battery indicator appears, replace all batteries in both the main unit and the outdoor sensor. It is recommended to use high-quality, non-leaking batteries (e.g., Lithium batteries) to prevent damage to the device, especially for long-term use.
- Temizlik: Wipe the clock and sensor with a soft, dry cloth. Do not use abrasive cleaners or chemicals, as they may damage the display or casing.
- Sensör Yerleşimi: For optimal performance and longevity, place the outdoor sensor in a shaded area that is protected from direct sunlight and heavy rain. While the sensor is splash-proof, prolonged exposure to harsh weather conditions can affect its accuracy and lifespan.
Sorun giderme
- Ekran Yok veya Sönük Ekran:
- Check battery polarity and ensure batteries are fresh. Replace all batteries if necessary.
- Outdoor Temperature/Humidity Not Displaying or Inaccurate:
- Ensure batteries in the outdoor sensor are fresh and correctly installed.
- Press the "CHANNEL" button on the main unit to re-establish connection or cycle through channels.
- Move the outdoor sensor closer to the main unit to improve signal strength. Avoid large metal objects or thick walls between the units.
- Ensure the sensor is not in direct sunlight, which can cause artificially high temperature readings.
- Atomic Time (WWVB) Signal Not Received:
- Place the clock near a window or in an open area, away from electronic devices that may cause interference.
- Manually initiate signal reception by holding the "DOWN/RCC" button for 3 seconds.
- Note that signal reception can be affected by atmospheric conditions, geographical location, and time of day (best reception is often overnight).
- Incorrect Date/Day of Week:
- Ensure the correct year is set if manually setting the time, as this can affect the calendar function. The atomic signal should correct this automatically once received.
Özellikler
| Özellik | Detay |
|---|---|
| Marka | DOVEET |
| Model Numarası | DR-41 |
| Görüntü Türü | Dijital lcd |
| Zaman Gösterimi | Hours, Minutes, Seconds (4.5" tall numbers) |
| Sıcaklık Aralığı (İç Mekan) | Not specified, typically 0°C to 50°C (32°F to 122°F) |
| Sıcaklık Aralığı (Dış Mekan) | Not specified, typically -40°C to 70°C (-40°F to 158°F) |
| nem Aralığı | Not specified, typically 20% to 95% RH |
| Wireless Sensor Range | Up to 328 ft (100 M) in open air |
| Güç Kaynağı (Ana Ünite) | 4 x AA Pil (dahil değildir) |
| Güç Kaynağı (Dış Mekan Sensörü) | 2 x AAA Piller (dahil değildir) |
| Ürün Boyutları | 14.3''W x 9.3''H x 1.3''D (approximate, from feature bullets) |
| Ürün Ağırlığı | 2.61 pound (1.19 Kilogram) |
| Malzeme | Akrilonitril Bütadien Stiren (ABS) Plastik |
| Montaj Tipi | Wall Mount or Tabletop (with kickstand) |
Garanti ve Destek
For warranty information or technical support regarding your DOVEET DR-41 Atomic Digital Wall Clock, please refer to the contact information provided on the product packaging or visit the official DOVEET webSite. Satın alma fişinizi, garanti talepleriniz için saklayın.



