1. Giriş
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new Einhell TE-MT 7.2 Li Cordless Rotary Tool. Please read this manual thoroughly before using the product and keep it for future reference.
2. Güvenlik Talimatları
Always observe the following safety precautions to reduce the risk of injury or damage.
- Tüm talimatları okuyunuz: Familiarize yourself with the controls and proper use.
- Uygun kişisel koruyucu ekipman (KKD) giyin: Such as safety glasses, gloves, and hearing protection.
- Çalışma alanını temiz ve iyi aydınlatılmış tutun: Dağınık veya karanlık alanlar kazalara davetiye çıkarır.
- Patlayıcı ortamlarda çalıştırmayın: Aleti yanıcı sıvıların, gazların veya tozların bulunduğu ortamlarda kullanmayın.
- İş parçasını güvenli hale getirin: Her zaman clamp or otherwise secure the material you are working on.
- Gücü kesin: Always disconnect the tool from its power source before making any adjustments, changing accessories, or storing it.
- Use the correct accessory: Ensure accessories are rated for the tool's speed and are properly installed.
- Boşta duran aletleri saklayın: Kullanılmadığı zaman aletler çocukların ulaşamayacağı kuru, yüksek veya kilitli bir yerde saklanmalıdır.
3. Ürün Bittiview
The Einhell TE-MT 7.2 Li is a versatile cordless rotary tool designed for engraving, grinding, and brushing tasks.
Şekil 1: Einhell TE-MT 7.2 Li Cordless Rotary Tool. This image shows the compact, red and black rotary tool with its chuck visible at the front, and control buttons and LED display on the top surface.
3.1. Bileşenler
- Chuck: For attaching various accessories.
- Mil Kilitleme Düğmesi: Facilitates easy accessory changes.
- Açma/Kapama Anahtarı: Aleti açıp kapatır.
- Speed Control Buttons (+/-): Adjusts the rotational speed.
- LED ekran: Shows the current speed setting.
- Dairesel LED Işık: Illuminates the workpiece for optimal visibility.
- Yumuşak tutma sapı: Provides ergonomic and secure handling.
- Şarj Kişileri: For use with the charging station.
4. Kurulum
4.1. Pilin Şarj Edilmesi
The tool is powered by an integrated 7.2V, 1500 mAh Li-ion battery. Before first use, fully charge the battery.
- Place the tool onto the charging station, ensuring the charging contacts align.
- Connect the charging station to a suitable power outlet.
- The charging indicator on the station will show the charging status.
- Once fully charged, disconnect the charging station from the power outlet.
4.2. Aksesuarların Takılması
- Aletin kapalı olduğundan emin olun.
- Press and hold the spindle lock button to prevent the chuck from rotating.
- Loosen the chuck nut by turning it counter-clockwise.
- Insert the shank of the desired accessory fully into the chuck.
- Tighten the chuck nut clockwise until the accessory is securely fastened. Do not overtighten.
- Mil kilitleme düğmesini bırakın.
5. Kullanım Talimatları
5.1. Açma/Kapatma
- To switch on: Press the On/Off switch. The LED display will illuminate.
- To switch off: Press the On/Off switch again.
5.2. Hızın Ayarlanması
The tool features electronic speed control with a range of 5,500 to 26,000 revolutions per minute (RPM).
- Kullanın + button to increase the speed.
- Kullanın - Hızı azaltmak için düğmeye basın.
- The LED display will show the current speed setting (e.g., 1-5).
- Select the appropriate speed for the material and accessory being used. Lower speeds are generally for polishing and delicate work, higher speeds for grinding and cutting.
5.3. Using the Circular LED Light
The integrated circular LED light provides illumination of the workpiece.
- The LED light automatically activates when the tool is switched on.
- Ensure the light is not obstructed during operation for optimal visibility.
6. Bakım
Düzenli bakım, aletinizin uzun ömürlü olmasını ve optimum performans göstermesini sağlar.
- Temizlik: After each use, wipe down the tool with a soft, damp bez. Sert kimyasallar veya aşındırıcı temizleyiciler kullanmayın.
- Hava Menfezleri: Keep the ventilation slots clean and free from obstructions to prevent overheating. Use compressed air if necessary.
- Aksesuar Saklama: Store accessories in their designated case to prevent damage and loss.
- Pil Bakım: For long-term storage, charge the battery to approximately 50% and store the tool in a cool, dry place. Recharge every 3-6 months if not in use.
- Denetleme: Periodically inspect the tool for any signs of damage, loose parts, or worn accessories. Do not use a damaged tool.
7. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Tool does not switch on. | Pil boşalmış. | Pili tamamen şarj edin. |
| Alet çalışırken duruyor. | Aşırı yük koruması etkinleştirildi. | Reduce pressure on the workpiece. Allow tool to cool down. |
| Aksesuar sallanıyor veya gevşek. | Aksesuar düzgün şekilde sabitlenmemiş. | Ensure accessory shank is fully inserted and chuck nut is tightened. |
| Performans düştü. | Battery low or accessory worn. | Recharge battery. Replace worn accessory. |
8. Özellikler
| Özellik | Detay |
|---|---|
| Örnek | TE-MT 7.2 Li |
| Pil Hacmitage | 7.2V |
| Pil Kapasitesi | 1.5 Ah (Li-ion) |
| Yüksüz Hız | 5,500 - 26,000 RPM |
| Ağırlık | 290 gr |
| Boyutlar (U x G x Y) | 19.6x4.6x4.1 cm |
| Dahil Aksesuarlar | 57-piece accessory set, charging station, storage box |
9. Garanti ve Destek
Einhell products are manufactured with care and undergo strict quality controls. This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Einhell webalan.
For technical support, spare parts, or service inquiries, please contact Einhell customer service or your authorized dealer. Keep your purchase receipt and product model number handy for faster service.
Resmi Webalan: www.einhell.com
