1. Giriş
The Fender Acoustic Junior GO amplifier is designed to provide full, natural sound for acoustic-electric guitars and vocals. This portable system features two independent channels, each equipped with studio-quality effects. Key functionalities include Bluetooth wireless audio streaming and an integrated 90-second looper, making it suitable for various performance settings. Its rechargeable battery allows for extended use without a power outlet.
2. Kurulum
2.1. Paketten çıkarma
Dikkatlice çıkarın amplifier from its packaging. Retain all packaging materials for future transport or storage. Inspect the amplifier for any signs of damage. If damage is present, contact your retailer immediately.
2.2. Açma ve Şarj Etme
The Acoustic Junior GO amplifier is equipped with a rechargeable lithium-ion battery. For initial use, it is recommended to fully charge the battery. Connect the provided power adapter to the amplifier's power input and then to a suitable electrical outlet. The charging indicator will illuminate. A full charge provides approximately 5 hours of playing time at full volume or 12 hours at moderate volume. The amplifier can also be operated while connected to AC power.
2.3. Connecting Instruments and Microphones
The amplifier features two independent channels:
- Kanal 1: Designed for acoustic-electric guitars. Connect your instrument using a standard 1/4-inch instrument cable.
- Kanal 2: Designed for microphones. Connect your microphone using an XLR cable. This channel also supports 1/4-inch instrument inputs.
Cihazı açmadan önce tüm bağlantıların güvenli olduğundan emin olun ampcankurtaran.
3. Kullanım Talimatları
3.1. Kanal Kontrolleri
Each channel features independent controls for volume, equalization (bass, middle, treble), and effects. Adjust these controls to achieve your desired sound. Experiment with different settings to find the optimal tone for your instrument or voice.
3.2. Bluetooth Eşleştirme
To stream audio wirelessly from a phone or tablet:
- Mobil cihazınızda Bluetooth’u aktifleştirin.
- Cihaz üzerindeki Bluetooth eşleştirme düğmesine basın. amplifier. The indicator light will flash.
- Select 'Fender Acoustic Junior GO' from the list of available devices on your mobile device.
- Once paired, the indicator light will remain solid, and you can stream audio through the ampcankurtaran.
3.3. Döngü Fonksiyonu
The onboard 90-second looper allows for recording and layering audio. The looper controls include:
- Record/Dub: Press once to start recording. Press again to overdub.
- Oynat/Durdur: Press once to play the loop. Press again to stop.
- Geri al: Reverts the last overdub.
Refer to the detailed looper section in the full manual for advanced techniques.
3.4. Tilt-Back Kickstand
The amplifier features an integral tilt-back kickstand. This allows you to angle the amplifier upwards, directing the sound more effectively towards the performer or audience, especially in smaller venues or when placed on the floor.
4. Bakım
4.1. Temizlik
Temizlemek için amplifier, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth may be used, followed by a dry cloth. Avoid using abrasive cleaners, solvents, or waxes, as these can damage the finish and components.
4.2. Depolama
Sakla amplifier in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan.
4.3. Pil Bakımı
To maximize the life of the lithium-ion battery:
- Pilinizin düzenli olarak tamamen boşalmasından kaçının.
- Açığa çıkarmayın ampaşırı sıcağa veya soğuğa daha dayanıklı.
- Eğer amplifier will not be used for several months, charge it to approximately 50% every 3-6 months.
5. Sorun Giderme
This section addresses common issues you might encounter with your Fender Acoustic Junior GO ampcankurtaran.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Ses çıkışı yok | Volume controls are low; cables are not connected properly; instrument/microphone issue; amplifier açık değil. | Check all volume knobs (master, channel, instrument/mic). Ensure cables are securely connected. Verify instrument/microphone functionality. Confirm amplifier is powered on and charged. |
| Bluetooth eşleştirmiyor | Bluetooth not activated on device; amplifier not in pairing mode; device too far. | Ensure Bluetooth is enabled on your device. Press the amplifier's Bluetooth button to enter pairing mode. Move your device closer to the ampcankurtaran. |
| Looper kayıt yapmıyor/çalamıyor. | Incorrect button sequence; looper memory full (unlikely for 90s). | Review the looper operating instructions. Ensure you are pressing the correct buttons for record, dub, play, and stop. |
| Bozuk ses | Input signal too high; volume too high; faulty cable. | Reduce the input gain or volume on the instrument/microphone channel. Lower the master volume. Try a different cable. |
6. Özellikler
| Özellik | Detay |
|---|---|
| Model Adı | Acoustic Junior GO |
| Model Numarası | 2314400000 |
| Marka | Çamurluk |
| Çıkış Watttage | 100 Watt |
| Ürün Boyutları | 16 x 20 x 16 inç (Yükseklik x Genişlik x Derinlik) |
| Ürün Ağırlığı | 20.6 pound |
| Pil Türü | Şarj Edilebilir Lityum-İyon |
| Pil Ömrü | Up to 5 hours (full volume), 12 hours (moderate volume) |
| Bağlantı | Bluetooth, 1/4-inch instrument input, XLR microphone input |
| Döngüleyici | 90-second with Record/Dub, Play/Stop, Undo |
| Cilttage | evrensel cilttage küresel kullanım için |
7. Garanti ve Destek
Fender products are designed for reliability and performance. For information regarding warranty coverage, product registration, or technical support, please visit the official Fender webWeb sitesini ziyaret edin veya Fender müşteri hizmetleriyle iletişime geçin. Garanti talepleri için satın alma belgenizi saklayın.
Çevrimiçi destek: www.fender.com/support
