70mai Jump Starter MAX Kullanım Kılavuzu

giriiş

Thank you for choosing the 70mai Jump Starter MAX. This device is designed to provide a reliable solution for jump-starting 12V vehicles with dead batteries and also functions as a portable power bank. Please read this manual thoroughly before use to ensure safe and optimal operation.

Ürün Bittiview

Temel Özellikler

• Yüksek Kapasite: Real 18,000mAh power bank with 500A start current and 1000A peak current.
• Geniş Araç Uyumluluğu: Designed for 12V vehicles, including petrol engines up to 8.0L and diesel engines up to 3.5L (Cars, SUVs, motorcycles, trucks, and more).
• Gelişmiş Güvenlik Korumaları: Features over charge/discharge protection, reverse connection protection, temperature protection, over current protection, over voltage protection, short circuit protection, and reverse charging protection.
• Aşırı Hava Koşullarına Uyum Sağlama: Operates effectively across a wide range of temperatures.
• Çok işlevli: Includes a helpful LED light and can charge electronic devices via USB.

Image: High Peak Current and Battery Capacity.

Image: Extreme Weather Adaptability.

Image: Wide Adaptability to Most Vehicles.

Paket İçeriği

The 70mai Jump Starter MAX package includes the following items:

• 70mai Jump Starter Max unit
• USB şarj kablosu
• Smart battery clip (jump start cable)
• Depolama çantası
• Cigarette lighter socket cable
• Kullanıcı Kılavuzu

Image: Contents of the 70mai Jump Starter MAX package.

Güvenlik Bilgileri

Please observe the following safety precautions to prevent injury or damage to the device and vehicle:

• Always ensure the jump starter is sufficiently charged before use.
• Connect the smart battery clip correctly: red clamp pozitif (+), siyah clamp to negative (-). Incorrect connection can cause sparks or damage.
• kırmızı ve siyah cl dokunmayınampBir kez akü takviye cihazına bağlandıktan sonra bir araya gelirler.
• Do not attempt to jump start a vehicle if the jump starter or cables are damaged.
• Cihazı çocuklardan uzak tutunuz.
• Cihazı iyi havalandırılan bir alanda kullanın.
• Cihazı uzun süre aşırı sıcaklıklara veya doğrudan güneş ışığına maruz bırakmayın.
• Aracınızın kullanım kılavuzunda, akü takviyesiyle çalıştırma prosedürleri hakkında detaylı bilgi bulabilirsiniz.

Kurmak

Jump Starter'ı Şarj Etme

Before first use, fully charge the 70mai Jump Starter MAX. Connect the provided USB charging cable to the jump starter's input port and to a suitable USB power adapter (not included). The indicator lights on the device will show the charging status. Ensure all lights are solid, indicating a full charge, before storing or using for jump-starting.

Image: Jump Starter MAX with USB ports for charging and power supply.

Kullanım Talimatları

Bir Aracı Çalıştırmak için Zıpla

1. Aracı Hazırlayın: Aracın kontak anahtarının kapalı olduğundan ve tüm aksesuarların (ışıklar, radyo, klima) kapalı olduğundan emin olun. El frenini çekin.
2. Connect the Smart Battery Clip:
   • Kırmızı (+) cl'yi bağlayınamp of the smart battery clip to the positive (+) terminal of the vehicle's dead battery.
   • Siyah (-) cl'yi bağlayınamp of the smart battery clip to the negative (-) terminal of the vehicle's dead battery.
   • Ensure a secure connection to both terminals.
3. Jump Starter'a bağlanın: Plug the smart battery clip connector into the jump start port on the 70mai Jump Starter MAX. The indicator on the smart clip should show a green light, indicating a correct connection and readiness to jump start. If a red light or no light appears, check connections and battery status.
4. Aracı Çalıştırın: Once the smart clip indicates readiness, start your vehicle's engine. If the vehicle does not start immediately, wait 30 seconds before attempting again. Do not crank the engine for more than 3 seconds per attempt.
5. Bağlantıyı kes: As soon as the vehicle starts, disconnect the smart battery clip from the 70mai Jump Starter MAX. Then, remove the black (-) clamp araç aküsünden, ardından kırmızı (+) clamp.

Image: 70mai Jump Starter MAX with smart battery clamps.

Güç Bankası olarak kullanma

The 70mai Jump Starter MAX can also be used to charge electronic devices. Connect your device's USB charging cable to the USB output port on the jump starter. The device will automatically begin charging. The cigarette lighter socket cable can be used to power compatible 12V accessories.

LED Işık İşlevi

The integrated LED light can be activated by pressing the power button. It typically offers multiple modes (e.g., steady light, strobe, SOS signal). Press the button repeatedly to cycle through modes or turn off the light.

Bakım

• Düzenli Olarak Şarj Edin: To maintain battery health, recharge the jump starter every 3-6 months, even if not used.
• Depolamak: Cihazı serin, kuru, doğrudan güneş ışığından ve aşırı sıcaklıklardan uzak bir yerde saklayın.
• Temizlik: Cihazı yumuşak ve kuru bir bezle silin. Sert kimyasallar veya aşındırıcı temizleyiciler kullanmayın.
• Kablo Denetimi: Periodically inspect the smart battery clip and cables for any signs of damage or wear. Replace if necessary.

Sorun giderme

Özellikler

Garanti ve Destek

The 70mai Jump Starter MAX comes with a 1 yıllık garanti from the date of purchase. For warranty claims, technical support, or any inquiries, please contact our support team:

• E-posta: support@nexdigitron.com
• WhatsApp/Call: 7737373626
• Webalan: www.nexdigitron.com

Lütfen garanti geçerliliği için satın alma belgenizi saklayın.