Scheppach Elektrikli Zincir Testere CSE2700 Kullanım Kılavuzu

1. Giriş

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Scheppach Electric Chainsaw CSE2700. Please read and understand all instructions before using the chainsaw. Retain this manual for future reference.

The Scheppach CSE2700 is a powerful electric chainsaw designed for cutting wood, such as felling small trees, limbing, and cutting firewood. It features a 2700W motor, a 45.5 cm (18 inch) guide bar, automatic chain lubrication, and an integrated chain brake for enhanced safety.

2. Genel Güvenlik Talimatları

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury or death.

2.1 Kişisel Güvenlik

• Uygun kişisel koruyucu ekipman (KKD) giyin: Always wear safety glasses or goggles, hearing protection, a hard hat, heavy-duty gloves, and sturdy, non-slip footwear. Leg protection (chainsaw chaps) is highly recommended.
• Sıkıca tutun: Hold the chainsaw with both hands, keeping your thumbs and fingers encircling the handles.
• Dikkatli olun: Do not operate the chainsaw when tired, under the influence of drugs, alcohol, or medication.
• Geri tepmeyi önleyin: Be aware of the kickback danger zone. Kickback can occur when the moving chain at the tip of the guide bar contacts an object, or when the wood closes in and pinches the saw chain in the cut.
• Work in a stable position: Ensure proper footing and balance at all times. Do not overreach.

2.2 Elektrik Güvenliği

• Güç kaynağı: Connect the chainsaw only to a properly grounded outlet with the specified voltage (230V AC).
• Uzatma kabloları: Use only outdoor-rated extension cords that are suitable for the chainsaw's power rating and are in good condition. Ensure the cord gauge is adequate for the length.
• Islak koşullardan kaçının: Do not operate the chainsaw in rain or damp conditions. Keep the power cord away from heat, oil, sharp edges, and moving parts.
• Gücü kesin: Always unplug the chainsaw from the power supply before making adjustments, changing accessories, or performing maintenance.

2.3 Çalışma Alanı Güvenliği

• Alanı temizleyin: Keep the work area clear of bystanders, children, and pets. Maintain a safe distance from other people and objects.
• Good lighting: Operate the chainsaw only in good daylight or adequate artificial light.
• İş parçasını güvenli hale getirin: Ensure the material to be cut is stable and properly supported.

3. Ürün Tanımı ve Bileşenleri

The Scheppach Electric Chainsaw CSE2700 is designed for efficient and safe wood cutting. Familiarize yourself with its main components:

• Motor Muhafazası: 2700W'lık elektrik motorunu içerir.
• Kılavuz Çubuğu: The metal bar that supports and guides the saw chain. Length: 45.5 cm (18 inches).
• Zincir testere: The cutting tool that rotates around the guide bar.
• Ön Sap: For two-handed operation and control. Features a peripheral design for versatile grip.
• Arka Sap: Contains the trigger switch and safety lock-off button.
• Zincir Freni/El Koruyucu: A safety device that stops the chain rapidly in case of kickback and protects the operator's hand.
• Yağ Tankı Kapağı: For filling chain lubrication oil.
• Oil Level Window: Allows easy monitoring of the chain oil level.
• Zincir Gerdirme Sistemi: Tool-free quick tensioning system for adjusting chain tightness.
• Claw Stop: A spiked bumper that helps stabilize the chainsaw against the wood during cutting.

4. Kurulum ve Montaj

Before initial use, the guide bar and saw chain must be correctly installed and tensioned.

4.1 Kılavuz Çubuğunun ve Zincirin Takılması

1. Ensure the chainsaw is unplugged from the power supply.
2. Remove the chain cover by loosening the retaining knob.
3. Place the chain around the sprocket and then guide it into the groove of the guide bar. Ensure the cutting edges of the chain are facing in the correct direction (refer to the arrow on the chainsaw housing).
4. Position the guide bar onto the mounting studs, ensuring the chain tensioning pin engages with the hole in the guide bar.
5. Replace the chain cover and lightly tighten the retaining knob. Do not fully tighten yet.

4.2 Zincir Gerginliğinin Ayarlanması

The chain tension is critical for safe and efficient operation. The CSE2700 features a tool-free quick tensioning system.

1. With the chain cover lightly tightened, use the tensioning knob (usually a large dial on the side) to adjust the chain tension.
2. The chain is correctly tensioned when it can be pulled freely along the guide bar by hand, but the drive links do not come out of the guide bar groove. There should be a small gap (approx. 2-3 mm) between the chain and the underside of the guide bar when lifted in the middle.
3. Once the tension is correct, fully tighten the chain cover retaining knob.

4.3 Filling Chain Oil

The chainsaw features automatic chain lubrication, requiring a constant supply of chain oil.

1. Ensure the chainsaw is unplugged.
2. Yağ deposu kapağını sökün.
3. Fill the oil tank with high-quality chain and bar oil. Do not use waste oil or motor oil.
4. Monitor the oil level through the oil level window.
5. Replace the oil tank cap securely.

5. Kullanım Talimatları

Always prioritize safety when operating the chainsaw.

5.1 Ameliyat Öncesi Kontroller

• Zincir gerginliğini kontrol edin.
• Verify chain sharpness.
• Ensure oil tank is full.
• Güç kablosunu hasar açısından inceleyin.
• Confirm chain brake is functional.

5.2 Motorlu Testerenin Çalıştırılması ve Durdurulması

1. Başlangıç: Plug the chainsaw into a suitable power outlet. Hold the chainsaw firmly with both hands. Press the safety lock-off button (usually on the rear handle) and then squeeze the trigger switch. The chain will begin to move.
2. Durdurma: Release the trigger switch. The chain will stop. In an emergency, activate the chain brake by pushing the front hand guard forward.

5.3 Kesme Teknikleri

Always follow safe cutting practices. The chainsaw is suitable for:

• Küçük ağaçların kesilmesi: Plan the felling direction, clear the area, and make appropriate felling cuts (notch and back cut).
• Dallanma: Remove branches from a felled tree. Work from the bottom up, supporting the branch to prevent pinching.
• Kütük kesme (ağaç budama): Cut logs into smaller sections. Support the log to prevent it from rolling or pinching the chain.

Always be aware of potential kickback and avoid cutting with the tip of the guide bar. Do not cut above shoulder height.

6. Bakım

Düzenli bakım, motorlu testerenizin uzun ömürlü ve güvenli çalışmasını sağlar.

6.1 Temizlik

• Temizlemeden önce elektrik bağlantısını kesin.
• Remove sawdust and debris from the motor housing, guide bar, and chain using a brush or compressed air.
• Clean the oil inlet hole and guide bar groove to ensure proper lubrication.

6.2 Zincir Bileme

A sharp chain is essential for efficient and safe cutting. Sharpen the chain regularly or replace it when dull. Refer to the chain manufacturer's instructions for proper sharpening angles and file boyutları.

6.3 Kılavuz Çubuğu Bakımı

• Eşit aşınmayı sağlamak için kılavuz çubuğunu periyodik olarak çevirin.
• Clean the guide bar groove and oil holes.
• Kılavuz çubuk raylarında çapak olup olmadığını kontrol edin ve file Eğer varsa, onları pürüzsüzleştirin.

6.4 Zincir Yağı

Always use high-quality chain and bar oil. Check the oil level frequently during operation and refill as needed.

7. Sorun Giderme

Bu bölümde motorlu testerenizde karşılaşabileceğiniz yaygın sorunlar ele alınmaktadır.

8. Teknik Özellikler

9. Garanti ve Destek

Warranty information for your Scheppach Electric Chainsaw CSE2700 is typically provided with your purchase documentation. Please refer to the warranty card or contact your retailer for specific details regarding coverage and terms.

For technical support, spare parts, or service inquiries, please visit the official Scheppach website or contact their customer service department. Ensure you have your model number (CSE2700) and serial number (if applicable) ready when seeking support.